COLBOR CL220R Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für COLBOR CL220R (21 Seiten) in der Kategorie Erleichterung. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/21
Thank you for choosing COLBOR product. Please read this manual
carefully before use and follow all instructions mentioned herein.
Video Light User Manual
CL220R
Caring For Your COLBOR Product
Power Connection
You must use the power adapter that comes with the product rather than
other adapters to avoid damaging the lamp. The positive and negative
connections of the power adapter interface( DC OUT) and the lamp power
interface (DCIN) are shown below:
+ -- +
N N
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
The product is not waterproof.
Do not leave the product unattended while in use. Keep out of reach of
children.
Do not handle with wet hands. Do not touch the hot COB surface.
Please do not block the ventilation and do not look at the light directly when
it is on.
Do not attempt to disassemble or modify the product. Doing so voids
warranty.
Please have the product checked or repaired by authorized technicians if
any malfunctions happened.
Disconnect from the power supply when it is not in use.
Do not cover, inverted COB and radiator for high temperature, do not cover,
inverted, do not touch the lamp holder and radiator vent with your hands
when the product in use.
Do not use any power adapter of other products to avoid the lamp
malfunction.
Malfunction may be caused by dropping, impact of external force.
Failure to follow all the instructions may result in mechanics damage.
Our company reserves the right of nal interpretation of the product.
Product design and specications are subject to change without prior
notice.
â‘  LED Display Screen
â‘¡ EFF Mode Button
â‘¢ EFF Rate Option Button
â‘£ Mode Button
⑤ Settings Menu Button
â‘¥ Left Knob/Option Adjustment Knob
⑦ Right Knob/Parameter Adjustment
Knob
⑧ DC 48V Power Port
⑨ Power Button
â‘© Bowens Mount Lock
⑪ Light Source
â‘« Lamp Angle Adjustment Locking
Grip
⑬ Lamp Holder
â‘­ Air Outlet
â‘® NATO Rail
⑯ Air Inlet
â‘° Lamp Handle
⑱ Umbrella Hole
⑲ Umbrella Hole Screw
⑳ Lamp Holder Screw
Product Instructions
Light Installation
Hold the COB cover with the Bowens Mount
tenon and rotate it in the direction of the arrow.
Note: Be sure to remove cob protective cover
and cob protective lm before use.
Installation of reector: Align the reector with the groove around the lamp
head and clip it in, turn the reector in the direction of the arrow, and the
reector installation will be completed after the top rod rebounds.
Removal of reector: Please follow the instructions below.
1. Removal of lamp cap protection cover
2. Installation and removal of reector


Produktspezifikationen

Marke: COLBOR
Kategorie: Erleichterung
Modell: CL220R

Brauchst du Hilfe?

Wenn Sie Hilfe mit COLBOR CL220R benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Erleichterung COLBOR

Bedienungsanleitung Erleichterung

Neueste Bedienungsanleitung für -Kategorien-