Chord SPM 5000 MkII Bedienungsanleitung

Chord Empfänger SPM 5000 MkII

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Chord SPM 5000 MkII (5 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
SPM 5000 MK II
POWER AMPLIFIER MANUAL
Chord Electronics Limited
Made in England by:
Chord Electronics Limited, The Pump House, Farleigh Bridge, Farleigh Lane, East Farleigh, Kent.
ME16 9NB. United Kingdom.
Tel: 44(0)1622-721444 Fax: 44(0)1622-721555
OPERATING INSTRUCTIONS
INSTALLATION
Your amplier should be positioned to ensure a free flow of air over the rear heat sink and through
the upper and lower grilles. When driven continuously at well above average listening levels, the
temperature on the heat sink may exceed 50
oC. This is not a fault, but an indication of the need for
adequate ventilation.
Please ensure that the IEC mains lead is correctly terminated.
UK/EUROPE Brown = LIVE = Black USA/CANADA
Blue = NEUTRAL = White
Yellow/Green = EARTH = Green
THE SPM 5000 MUST BE EARTHED AT ALL TIMES VIA ITS OWN MAINS LEAD.
FAILURE TO DO THIS MAY BE HAZARDOUS.
CE This unit complies with EN 50081-1 & IEC 801/2
It has come to light that, in some European
countries a hum may occur if Pre and Power
Ampliers are connected to mains wall sockets
which do not have an earth. Please ensure
that, if this is the case, the pre and power
amps are connected via a multi-way mains
block which contains an earth point at each
socket outlet. This is to ensure that the chassis
metalwork of each item is connected together
and Chord Electronics Limited firmly
recommend that an earthing method for the
building is implemented.
Chord Electronics Limited
Made in England by:
Chord Electronics Limited, The Pump House, Farleigh Bridge, Farleigh Lane, East Farleigh, Kent.
ME16 9NB. United Kingdom.
Tel: 44(0)1622-721444 Fax: 44(0)1622-721555
REAR PANEL
The two female XLRs are pre-amplier inputs. Also, phono input sockets are available immediately
outboard of the IEC mains plug. Please connect these last, with the amplier switched o.


Produktspezifikationen

Marke: Chord
Kategorie: Empfänger
Modell: SPM 5000 MkII

Brauchst du Hilfe?

Wenn Sie Hilfe mit Chord SPM 5000 MkII benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger Chord

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-