Chief RPAB1 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Chief RPAB1 (12 Seiten) in der Kategorie Projektorzubehör. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
I N S T A L L A T I O N I N S T R U C T I O N S
Locking Projector Mount
RPAA1, B1, C1
RPAA1, B1, C1 Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chieis a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty!
It is the installer’s responsibility to make sure all components
are properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to the RPAX1 does not exceed 50 lbs
(22.68 kg).
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this product outdoors.
WARNING: The RPAX1 mounts are designed to be
mounted to a 1-1/2" NPT or NPSM following ANSI/ASME
B1.20.1 (Schedule 40, 0.154" minimum thickness steel or
aluminum-ASTM B221) threaded extension column.
NOTE: RPAA1, RPAB1 and RPAC1 models are included in
these installation instructions. Throughout these
instructions "RPAX1" is used to designate all of the
models covered by these instructions.
--SAVE THESE INSTRUCTIONS--
Installation Instructions RPAA1, B1, C1
3
DIMENSIONS
4.02
102.0
ROLL
ADJUST
12.31
312.7
6.11
155.1
27° YAW
ADJUST
1.50" DIA NPT
3.73
94.8
25° PITCH
ADJUST
DIMENSIONS: INCHES
[MILLIMETERS]


Produktspezifikationen

Marke: Chief
Kategorie: Projektorzubehör
Modell: RPAB1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Chief RPAB1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Projektorzubehör Chief

Bedienungsanleitung Projektorzubehör

Neueste Bedienungsanleitung für -Kategorien-