Chief MCS6015 Bedienungsanleitung

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Chief MCS6015 (2 Seiten) in der Kategorie Flat panel steun. Dieser Bedienungsanleitung war fĂĽr 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
I N S T A L LA T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING, a division of Milestone AV Technologies, Inc. 8840-000095
1-800-582-6480 952-894-6280 FAX 952-894-6918 2008© Milestone AV Technologies
8401 EAGLE CREEK PKWY, STE. 700 www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA 04/08
ALL COMPONENTS MUST BE SECURELY FASTENED TO A
STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4
TIMES THE COMBINED WEIGHT OF ALL COMPONENTS
PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT
SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE
REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE
MOUNT IS
125
POUNDS (
56
.74
KG).
MSB-6015
FLAT PANEL DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(1) Interface Bracket (4) Mounting Button – Tapped
(4) 10-24 x .5 Button Head Cap Screw (4) M5 x 20 Phillips Head Screws
(4) 18 OD x 8.3 ID x 10 L Metric Nylon Spacer (1) 1/8 Allen Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
DISPLAYS ARE EXTREMELY FRAGILE.
CAUTION!
Figure 1
WARNING!
NOTE: If installing screen on a Chief J-series wall mount, proceed
to Step 2 (J-Series VESA Interface Installation).
1. Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with
chamfered hole of mounting button (larger surface) facing bracket, to top and bottom brackets (four places) (see
Figure 2 & Figure 3).
2. Place Nylon spacers over mounting holes on back of screen. Attach mounting brackets to display using the M5
screws (see Figure 4 & Figure 5). Use the inner set of holes for 32” and 37” screens and the outer set of holes
for 42” and 47” screens.
3. With the aid of another person, lift your display up to the Chief Mount, aligning buttons of mounting brackets
with slots in the Chief Mount. Lower safety latch on the Chief Mount to secure your display, making sure latch
is completely engaged. If using a Chief J-series wall mount, use the M4 screws provided with the wall mount
to attach the wall mount to the interface plate.
Figure 2 Figure 3
Figure 4 Figure 5

Produktspezifikationen

Marke: Chief
Kategorie: Flat panel steun
Modell: MCS6015

Brauchst du Hilfe?

Wenn Sie Hilfe mit Chief MCS6015 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Flat panel steun Chief

Bedienungsanleitung Flat panel steun

Neueste Bedienungsanleitung fĂĽr -Kategorien-