Chief FSBVB Bedienungsanleitung

Chief Unterstützung für Flachbildschirme FSBVB

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Chief FSBVB (8 Seiten) in der Kategorie Unterstützung für Flachbildschirme. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone
makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the
installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation
of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the infor-
mation contained in this document.
Chief Manufacturing, a products division
of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
I N S T A L L A T I O N I N S T R U C T I O N S
8804-000293 RevB
2009 Milestone AV Technologies,
a Duchossois Group Company
www.chiefmfg.com
10/09
BEFORE YOU BEGIN
Display Interface
Model: FSB-V
CAUTION: To prevent damage that could affect or void the Factory warranty, and to the equipment that will be
attached to it, thoroughly study all instructions and illustrations before you begin the installation.
• If you have any questions about this installation, contact Chief Manufacturing.
Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.
Model: FSB-V Installation Instructions
2
IMPORTANT WARNINGS AND
CAUTIONS!
WARNING: Failure to provide adequate structural
strength for this component can result in serious
personal injury or damage to equipment! It is the
installer’s responsibility to make sure the structure to
which this component is attached can support five
times the combined weight of all equipment. Reinforce
the structure as required before installing the
component.
TOOLS REQUIRED FOR INSTALLATION
• Phillips Screw Driver
INSPECT MOUNT BEFORE ASSEMBLY
CAUTION: Carefully inspect components for shipping
damage. If damage is apparent, call your carrier claims
agent and do not continue with installation until the
carrier has reviewed the damage. (See Figure 1)
Table 1: Parts
ITEM DESCRIPTION QTY
10 BRACKET, Interface, 100 x 200 1
20 BUTTON, Mounting 4
30 SCREW, Phillips Flat Head, M4 x 12mm 6
40 SCREW, Phillips Flat Head, M4 x 20mm 6
50 SCREW, Phillips Flat Head, M4 x 25mm 6
60 SCREW, Phillips Pan Head, M4 x 10mm 4
70 SCREW, Phillips Pan Head, M4 x 12mm 4
80 SCREW, Phillips Pan Head, M4 x 20mm 4
90 SCREW, Phillips Pan Head, M4 x 25mm 4
100 SCREW, Phillips Pan Head, M4 x 30mm 4
110 SPACER, 3/4" x 1/4" 6
120 SPACER, Nylon 3/4" x 1/2" 6
Figure 1: Parts
10
20
120
30
40 50
60 70 80 90
100
110
Installation Instructions Model: FSB-V
3
INSTALLATION
CAUTION: IMPROPER INSTALLATION CAN LEAD
TO DISPLAY FALLING! Use only hardware provided
and referenced within these instructions. DO NOT
substitute!
Installation For Mounts Equipped With Latching
Flags
To install the FSB-V on Latching Flag Equipped Mounts:
1. Assemble four mounting buttons (20) to interface
bracket (10) using four M4 x 12mm Phillips pan head
screws (70). (See Figure 2)
Figure 2: Assemble Mounting Buttons to Interface
Flush Mount Display Interface Installation
1. Assemble interface bracket assembly (with mounting
buttons) to display using six M4 x 12mm Phillips flat
head screws (30). (See Figure 3)
Figure 3: Interface Installation, (Flush Mount)
Recessed Mount Display Interface Installation
1. Align and place six spacers (110 or 120) over
mounting holes in display back. (See Figure 4)
2. Align and place interface bracket assembly over six
spacers (110 or 120). (See Figure 4)
3. Secure interface assembly to display back using six
M4 x 20mm (40) or six M4 x 25mm (50) Phillips flat
head screws. (See Figure 4)
Figure 4: Interface Installation (Recessed Mount)
10 20
70
Back of Display
Interface Bracket Assembly
(with mounting buttons) 30
(6 places)
Back of Display
Interface Bracket Assembly
(with mounting buttons)
40 or 50
(6 places)
(6 places)
110 or 120

Produktspezifikationen

Marke: Chief
Kategorie: Unterstützung für Flachbildschirme
Modell: FSBVB

Brauchst du Hilfe?

Wenn Sie Hilfe mit Chief FSBVB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Unterstützung für Flachbildschirme Chief

Chief

Chief PFQUB Bedienungsanleitung

4 September 2024
Chief

Chief VPAU Bedienungsanleitung

4 September 2024
Chief

Chief MFQUB Bedienungsanleitung

3 September 2024
Chief

Chief PFMUB Bedienungsanleitung

3 September 2024
Chief

Chief PNR2536B Bedienungsanleitung

22 August 2024
Chief

Chief MF26000B Bedienungsanleitung

21 August 2024
Chief

Chief TPK1 Bedienungsanleitung

21 August 2024
Chief

Chief PDR2612B Bedienungsanleitung

21 August 2024
Chief

Chief CMA395 Bedienungsanleitung

21 August 2024
Chief

Chief JHSUB Bedienungsanleitung

21 August 2024

Bedienungsanleitung Unterstützung für Flachbildschirme

Neueste Bedienungsanleitung für -Kategorien-

NEC

NEC PDVWXUN 55 P Bedienungsanleitung

16 Oktober 2024
Insignia

Insignia NS-STV3N1705 Bedienungsanleitung

15 Oktober 2024
Abus

Abus BW8060 Bedienungsanleitung

4 Oktober 2024
One For All

One For All DM 4110 Bedienungsanleitung

2 Oktober 2024
One For All

One For All DM 7220 Bedienungsanleitung

2 Oktober 2024
One For All

One For All DM 2220 Bedienungsanleitung

2 Oktober 2024
Kogan

Kogan KASMM39S12A Bedienungsanleitung

1 Oktober 2024
Kogan

Kogan KATWM70TLMA Bedienungsanleitung

1 Oktober 2024
Kogan

Kogan KADMM46G24A Bedienungsanleitung

1 Oktober 2024
Kogan

Kogan KADMMPCGASC Bedienungsanleitung

1 Oktober 2024