Chief CPA264 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Chief CPA264 (4 Seiten) in der Kategorie Projektorzubehör. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
I N S T A L L A T I O N I N S T R U C T I O N S
NPT Female to CPA Female Coupling
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
CPA264
CPA264 Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chieis a registered trademark of Milestone AV Technologies.
All rights reserved.
DEFINITIONS
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary product designed by Chief® to mount the projector or
display.
ACCESSORY: An ACCESSORY is any product designed by
Chief® to complement the primary mounting system either by
mounting any supporting components or enhancing the
mounting capabilities of the primary mounting system.
COMPONENT: A COMPONENT is any secondary product to
be mounted to an accessory, i.e. speakers, CPUs, cameras,
tablets, additional displays.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all mounts/accessories
are properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this accessory can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this accessory is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
accessory.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located within the mounting system of the
CPA264 does not exceed 500 lbs (226.8 kg).
The weight capacity of the CPA264 may be
LIMITED to the lowest weight capacity of any other
component or accessory used within the mounting
system.
WARNING: Use this accessory only for its intended use as
described in these instructions. Do not use attachments not
recommended by the manufacturer.
WARNING: Never operate this accessory if it is damaged.
Return the accessory to a service center for examination and
repair.
WARNING: Do not use this product outdoors.
NOTE: Accessory is intended to be used with the UL Listed
CPA Extension Column Series and a 1-1/2" NPT or
NPSM following ANSI/ASME B1.20.1 (Schedule 40,
0.154" minimum thickness steel or aluminum-ASTM
B221) threaded extension column (not included).
--SAVE THESE INSTRUCTIONS--
DIMENSIONS
0.375
9.5
0.34
8.7
SET SCREW HOLE
2.25
57.2
1-1/2" NPT COLUMN
(NOT INCLUDED)
CPA COLUMN
(NOT INCLUDED)
DIMENSIONS: INCHES
[MILLIMETERS]
Installation Instructions CPA264
3
TOOLS REQUIRED FOR INSTALLATION / PARTS
5/32"
(included)
A (1)
[CPA264 Coupler]
F (1)
5/32"
1/2"
1/2"
nut driver
1/2"
B (4)
5/16-18 x 1" D (4)
5/16"
C (4)
5/16"
E (1)
5/16-18 x 1/2"
Hardware bag
INSTALLATION
IMPORTANT ! : The following procedure assumes that a
1-1/2" NPT or NPSM following ANSI/ASME B1.20.1
(Schedule 40, 0.154" minimum thickness steel or
aluminum-ASTM B221) threaded extension column (not
included) has been properly installed following
instructions provided with extension column.
NOTE: The CPA264 adapts a
1-1/2" NPT or NPSM following
ANSI/ASME B1.20.1 (Schedule 40, 0.154" minimum
thickness steel or aluminum-ASTM B221) threaded
extension column (not included); to a UL Listed CPA
extension column (not included).
1. Thread CPA264 (A) onto
a 1-1/2" NPT or NPSM following
ANSI/ASME B1.20.1 (Schedule 40, 0.154" minimum
thickness steel or aluminum-ASTM B221) threaded
extension column (not included)
until tight, with a minimum
of four threads engaged. (See Figure 1)
2. Install and tighten one 5/16" x 1/2" set screw (E) through
CPA264 and against column. (See Figure 1)
Figure 1
NOTE: Installation of hex head self-tapping screws will be
easier when screws are carefully aligned with holes in
extension column, and a drill and nut driver is used. If a
drill will NOT be used, a small amount of pressure will
be needed to get the self-tapping screws started.
3. Install UL Listed CPA extension column
(not included)
following instructions included with extension column and
using four 5/16" x 1" self-tapping screws (B) through four
5/16" split lock washers (C), and four flat washers (D). (See
Figure 1)
1
(E) x 1
CPA extension
column (not
included)
1-1/2" NPT or
NPSM extension
column (not
included)
2
(B) x 4
3
(C) x 4
(D) x 4


Produktspezifikationen

Marke: Chief
Kategorie: Projektorzubehör
Modell: CPA264

Brauchst du Hilfe?

Wenn Sie Hilfe mit Chief CPA264 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Projektorzubehör Chief

Bedienungsanleitung Projektorzubehör

Neueste Bedienungsanleitung für -Kategorien-