Cherry MultiBoard G81-8040 Bedienungsanleitung

Cherry Nicht kategorisiert MultiBoard G81-8040

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Cherry MultiBoard G81-8040 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
1
MultiBoard
G81-7040/-8040/-7043/-8043
1 Advantages of the keyboards
• Cherry FTSC key technology
• Robust and reliable
• Programmable keys
• Magnetic card reader (G81-7040/-8040 only)
• EMV 2000-approved PC/SC chip card reader
• OPOS and JavaPOS support
• Client/server support
•Cherry Tools software for programming and
configuration
1.1 Status indicators
The left and center LEDs show the status of the
locked-key function of the Num and Caps keys.
The right LED illuminates green when the chip card
reader is ready for operation. It flickers red while
data is being sent from/to the chip card reader.
2 Connection of the keyboard
¾Insert the USB plug into any USB port on your
PC.
3 Installation of the software
Current software on the Internet
The software is continually updated. The current
version can be obtained on the Internet at:
http://support.cherry.de
1 Place the CD in your CD-ROM drive.
The CD-ROM starts automatically.
2 If the CD-ROM does not start automatically,
double-click the CD-ROM drive in Windows
Explorer and then the Start.exe file.
3 Follow the installation instructions on the screen.
3.1 Cherry Tools
The following functions are supported:
• Programming of keys
• Configuration of the keyboard
• Activation and configuration of the magnetic
card reader
3.2 Cherry Tools Runtime
Distributes existing configurations to other systems
(e.g. keyboard and magnetic card settings.) No
additional applications are installed beside the
drivers required for operation.
¾Read the installation instructions on the
accompanying CD-ROM.
3.3 Cherry OPOS/JavaPOS support
If you use applications which access the keyboard
or magnetic card reader via OPOS or JavaPOS:
Windows operating system
¾Install the Cherry OPOS Support or Cherry
JPOS Support software.
Linux operating system
¾Use the installation scripts for JavaPOS support
on the CD-ROM in the
Software\JavaPOS\Linux directory.
Operating Instructions
644-0426.00 US Okt 2005
2
3.4 Software for the chip card reader
¾Install the drivers of the chip card reader for the
PC/SC interface (1.0) via the Hardware
Assistant.
For additional CT-API support (MKT 1.0) and home
banking:
¾Run Cherry SmartDevice Setup.
4 Programming of keys and
magnetic card reader
The configuration of all functions can be done via
software macros. This means that the configuration
is not saved in the keyboard, but rather as a file on
the PC.
¾Install the Cherry Tools software.
You can configure all the functions of the
keyboard with the Designer found within the
software.
Operation is described in the direct help of the
Cherry Tools software. It provides you with
information where you need it and is called up
via F1.
5 Magnetic card reader
(G81-7040/8040 only)
The functions of the magnetic card reader are
available when one of the following Cherry
software packages has been installed:
•Cherry Tools
•Cherry Tools Runtime
•Cherry OPOS support
•Cherry JavaPOS support for Windows
•Cherry JavaPOS support for Linux
The magnetic card reader is able to read the tracks
individually, in pairs or all at once. Decoding of the
read data is carried out via software.
Definition of header and terminator:
• Header and terminator identify the start and end
of the transfer of magnetic card data. The
header/terminator code is inserted before/after
the actual magnetic card data.
Using the magnetic card reader
1 Insert magnetic card into the magnetic card
reader on the right with the magnetic strip facing
downwards and towards the keyboard.
2 Swipe magnetic card through the magnetic card
reader to the left.
An audible tone confirms a valid reading. (This
signal can be deactivated via the software.) The
data is transferred.
6 Chip card reader
The integrated chip card reader is available
after you have installed the software. It reads and
writes to all chip cards conforming to
DIN ISO 7816-1/2/3/4.
¾Insert the chip card into the chip card slot with
the chip facing downwards and towards the
keyboard.
After a discernable pressure point has been
passed, contact takes place.
7 RSI syndrome
RSI syndrome
RSI stands for "Repetitive Strain Injury". RSI arises
due to small movements continuously repeated
over a long period of time.
Typical symptoms are discomfort in the fingers or
neck.
1 Set up your workspace for maximum ergonomic
benefit.
2 Change the angle of the keyboard using the rear
supports.
3 Take several short breaks, with stretching
exercises if necessary.
4 Change the position of your body often.
8 Disposal
Dispose of the old unit via a
collecting point for electronic scrap or
via your dealer.
3
9 Technical data
9.1 Keyboard
9.2 Magnetic card reader
(G81-7040/-8040 only)
9.3 Chip card reader
Description Value
Interface USB plug
Power supply +5 V/DC ±5 % SELV
Current consumption max. 300 mA
Storage temperature
range
–20 °C to +60 °C
Operating temperature
range
0 °C to +50 °C
Description Value
Tracks two or three
Reading speed 3 to 125 inch/s at
75 bits/inch, 3 to
50 inch/s at 210 bits/
inch
Standards ISO 7811/-12,
AAMVA, JIS 1
No. of reads up to 1,000,000
Description Value
Transfer rate To the card:
max. 420 kbps,
To the system:
max. 12 mbps
Standards ISO 7816, EMV 2000
Level1, CCID, PC/SC,
CT-API
Protocols T=0, T=1, S=8 (IIC),
S=9 (3-wire;
SLE 4418/28),
S=10 (2-wire;
SLE 4432/42)
Contacts Landing contacts
Insertions/removals approx. 200,000
10 Contact
Cherry GmbH
Cherrystraße
91275 Auerbach
Germany
www.cherry.de/advanced
Sales:
Tel.: +49 (0) 1805 243779 (01805 CHERRY),
(0.12 €/min.)
E-mail: sales@cherry.de
Technical support:
Tel.: +49 (0) 1805 919108 (0.12 €/min.)
E-mail: support@cherry.de
Please have the following information on hand
when contacting technical support:
• Item and serial no. of the product
• Name and manufacturer of your PC/notebook
or motherboard
• Operating system and, if applicable, installed
service pack version
11 General advice
Cherry continuously optimizes products as new
technologies are developed. For this reason we
reserve the right to make technical alterations. The
evaluation of product reliability and the definition of
the product’s technical performance are carried out
according to Cherry’s own requirements in order to
meet internationally recognized regulations and
standards. Requirements in addition to these can
be met through mutual cooperation. Improper
usage, handling, storage and external influences
could lead to faults and defects during use.
We do not accept warranty for defects caused by
alterations to our product by the user and shall not
be held liable for unauthorized modifications. All
repairs must be made by Cherry or an officially
appointed organization or persons.
Possible compensation claims against Cherry or its
nominated officers – whatever the legal justification
including physical or stress related injuries – are
excluded. Exceptions to this exist in the case of
intent or gross negligence on the part of Cherry,
infringements of Product Liability Law or in cases
of injury, bodily harm or risk to health. These
operating instructions only apply to the
accompanying product.
Full details can be obtained from your local Cherry
dealer or directly from Cherry GmbH.


Produktspezifikationen

Marke: Cherry
Kategorie: Nicht kategorisiert
Modell: MultiBoard G81-8040

Brauchst du Hilfe?

Wenn Sie Hilfe mit Cherry MultiBoard G81-8040 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Cherry

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-