CDA TV5CH Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CDA TV5CH (2 Seiten) in der Kategorie Kran. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
5 Year warranty:
All CDA taps are covered by a 5 year parts guarantee. Labour & fitting costs are not included except under exceptional
circumstances. Decorative surface finishes and O-rings are guaranteed for ONE year from the date of purchase provided
that our advice concerning care has been observed. This is provided that the mixer has been used for normal domestic
purposes in the UK and that the care, installation and maintenance instructions have been observed. The warranty
extends to the original purchaser only. You should retain a copy of your dated invoice as proof of purchase to validate
any claims under this guarantee.
Care Instructions for your Tap:
To maintain the appearance of this tap, ensure that it is regularly cleaned only using a clean, soft damp cloth. A solution of
warm water and a mild liquid detergent may be used where necessary, and then the fitting rinsed thoroughly and wiped
dry. Any other cleaning action will invalidate your warranty.
If the tap has a diffuser it should be cleaned periodically. Abrasive cleaners, scouring cleaners and acidic cleaners must not
be used under any circumstances. Avoid contact with all solvents (including chlorinated solvents, ketones or acetones as
these may result in surface deterioration or etching). Also avoid contact with any harsh household chemicals such as oven
cleaners, drain cleaners, rust removers, paint strippers and toilet bowl cleaners, bar keepers friend or Brasso.
Important Technical Data:
*If these temperatures or pressures are exceeded, even for short periods, damage can result.
CDA taps are either WRAS approved or manufactured in accordance with recognised European standards. Please ensure that
your tap is fitted in accordance with Local Water Byelaws.
These installation guidelines have been prepared for your direction and you must exercise due care at all times. We do not
accept responsibility for problems that may occur through improper installation. Whilst assembling the tap take care not to
accidentally loosen any screwed assemblies.
TV5CH Contemporary side single
lever tap
Minimum operating pressure 0.5 bar Maximum hot water temperature 90 °C*
Maximum operating pressure 12 bar*
Installation Preparation:
Before installing a new tap it is essential that you thoroughly flush through the supply pipes in order to remove any
remaining solder, swarf or impurities from your system. Failure to carry out this simple procedure could cause problems
or damage to the internal components of the tap.
We strongly recommend installing particle filter strainers and isolation valves to both the hot and cold feed pipes in an
accessible position. This will help to prevent premature failure of the valves and ease any future maintenance.
All parts should be removed from their packaging and inspected for any transport damage prior to installation.
Turn off and drain the water supply to the sink, unless there are isolation valves fitted.
This tap requires a 35mmø tap hole. If replacing an existing tap, remove the tap and clean the end of the feed pipes using
wire wool the tap hole area should be free from dirt and sealant. Loosely position the tap and tail pipes to check if any
alteration to the existing pipework is required, if this is the case do this now.
Installation:
After installation:
Once you have visually checked the new fittings and connections, turn the water
supply back on and check all fittings carefully for leaks. Then turn the tap back on
and check there are no leaks from the body or valve area.
Clean the tap to remove any marks created during installation as instructed then
replace the bag that has been provided to protect the tap until it is ready for use.
TV5CH Contemporary side single
lever tap
KEY DESCRIPTION QUANTITY
A Tap body 1
B Upper sink/worktop seal 1
C Horseshoe washer 1
D Horseshoe washer 1
E Studded rod 1
F Fixing nut 1
G Inlet pipe (offset) 1
H Inlet pipe 1
Produktspezifikationen
| Marke: | CDA |
| Kategorie: | Kran |
| Modell: | TV5CH |
Brauchst du Hilfe?
Wenn Sie Hilfe mit CDA TV5CH benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Kran CDA
16 August 2024
15 August 2024
15 August 2024
14 August 2024
14 August 2024
13 August 2024
13 August 2024
11 August 2024
11 August 2024
11 August 2024
Bedienungsanleitung Kran
- Kran Ernesto
- Kran Teka
- Kran IKEA
- Kran Inventum
- Kran Smeg
- Kran Lynx
- Kran Caple
- Kran ETNA
- Kran Livarno
- Kran Franke
- Kran Elba
- Kran Nodor
- Kran Stiebel Eltron
- Kran Miomare
- Kran Grohe
- Kran Delta
- Kran Hansgrohe
- Kran Brita
- Kran Schütte
- Kran Lamona
- Kran Mizzo
- Kran Oras
- Kran Berg
- Kran Quooker
- Kran BLANCO
- Kran Elkay
- Kran Deante
- Kran Neo
- Kran Everpure
- Kran ZLine
- Kran Sani-Lav
- Kran Fala
- Kran Aloni
- Kran Omnires
- Kran CurAqua
- Kran Gessi
- Kran Sussex
- Kran Fantini
- Kran Oliveri
- Kran Zip
- Kran Axor
- Kran Moen
- Kran WillieJan
- Kran Brauer
- Kran Lomazoo
- Kran American Standard
- Kran Billi
- Kran SaniSupreme
- Kran Vola
- Kran Viidako
- Kran Waltec
- Kran Graff
- Kran Zurn
Neueste Bedienungsanleitung für -Kategorien-
3 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024