Cateye Astrale CC-CD100 N II Bedienungsanleitung

Cateye Fahrradcomputer Astrale CC-CD100 N II

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Cateye Astrale CC-CD100 N II (2 Seiten) in der Kategorie Fahrradcomputer. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

#169-6460N

Bracket Sensor Kit

Kit Support Unité Principale et Détecteur

Halterung+Radsensor Ausrüstung für Vorderradmontage

Bracket en sensorkitset

Element da montare : Supporto Unità principale e Sensore

Conjunto de soporte y sensor

ブラケットセンサーキット

#169-6467

Center Mount Bracket Kit

Kit de montage central de l'unité principale

Halterung für Montage an der Lenkermitte

Stuurbocht Bevestiging Set

Kit di montaggio al centro del manubrio

Kit Soporte pala Montaje Central

センターマウントブラケットキット

#169-6468

Bracket Sensor Kit for Aero Bar

Kit de Montage du Collier de Détecteur pour Barre Aero

Halterung und Radsensor für Aero-Lenker

Sensor bevestiginset voor Aero Stuurbocht

Kit di Montaggio del Collare del Sensore per Barra Aero

Kit abrazadera de sensor para manillares Aero

エアロバー用ブラケットセンサーキット

#169-6469

Stem Mount Bracket Kit

Kit de montage de l'unité principale sur la broche du guidon

Halterung für Montage an der Lenkerstange

Stuurpen Bevestiging Set

Kit di montaggio sull'attacco manubrio

Kit Soporte pala Montaje en Tija

ステム用ブラケットセンサーキット

#169-6470 #169-6280

Attachment Kit Universal Sensor Band

Kit de Gamitures

Garniture Universelle pour Détecteur

Befestigungsmaterial Universal Befestigungsband

Kabelbevestigingset Universele Sensor klemstrip

Guarnizioni da montare Guanizione Universale per Sensore

Elementos de fijación Banda del Sensor Universal

アタッチメントキットユニバーサルセンサーバンド

#169-9765 #169-9780

Cadence Magnet Attachment for Aerofork

Aimant de Cadence Fixation pour fourche AERO

Pedalmagnet Zusatz zur Federgabel

Kadans magneet Bevestiging voor aerovork

Magnete Cadenza Attacco per forcella aerodinamica

Imón de cadencia Sujección para horquilla aerodinámica

ケイデンスマグネット扁平フォーク用アタッチメント

#169-9691 #166-5150

Wheel Magnet Lithium Battery (CR2032)

Aimant de roue Pile au lithium (CR2032)

Radmagnet Lithium-Batterie (CR2032)

Wielmagneet Lithum Batterij (CR2032)

Magnete ruota Bateria al Litio (CR2032)

Imón de la rueda Bateria de Litio (CR2032)

ホィールマグネットリチウム電池 (CR2032)



SPARE ACCESSORIES

PIECES DE RECHANGE

/ZUBEHÖTEILE

VERVANGINGSONDERDELEN/

ACCESSORI/

ACCESORIOS DE REPUESTO

アクセサリーパーツ

U.S. Pat. Nos. 4633216/4642606/5236759/5226340/5904442 and Patent Pending

Design Patented

CCMCD1N2-010507 066600100

CYCLOCOMPUTER

Model CC-CD100 N II

Setting Values Cross Reference Table (The tire size is marked on both sides of the tire.)

Table de Correspondance des Valeurs de Réglage (La dimension du pneu figure de chaque côté du pneu)

Wertetabelle zur Einstellung des Radumfanges

(die Radgröße entnehmen Sie der Aufschrift des Reifens)

Tabel voor het bepalen van de wielomtrek

(de bandenmaat staat vermeld aan beide zijden van de band)

Tabella delle Corrispondenze dei Valori di Regolazione (La dimensione del pneumatico figura su ogni lato del pneumatico)

Tabla de Valores (El tamaño de la rueda está marcado al lado de la llanta)

タイヤ周長ガイド（タイヤサイズは通常タイヤの側面に記載されています）

LIMITED WARRANTY

1-Year Warranty for Main Unit Only

(Accessories/Attachments and Battery Consumption excluded)

If trouble occurs during normal use, the part of the Main Unit will be repaired or replaced free

of charge. The service must be performed by Cat Eye Co., Ltd. To return the product, pack it

carefully and remember to enclose the warranty certificate with instruction for repair. Please

write or type your name and address clearly on the warranty certificate. Insurance, handling

and transportation charges to our service shall be borne by person desiring service.

Address for service:

2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan

Attn.: CAT EYE Customer Service Section

Service & Research Address for United States Consumers:

CATEYE Service & Research Center

1705 14th St. 115 Boulder, CO 80302

Phone: 303-443-4595 Toll Free: 800-5CATEYE

Fax: 303-473-0006 e-mail: CatEyeUSA@aol.com

GARANTIE LIMITÉE

1 An de Garantie sur l'Unité Principale Uniquement

(Les accessoires et la pile sont exclus de la garantie)

En cas de probl me en cours d'utilisation normale, l'unit principale sera r e ou remplac e gratuitement. Par Cat Eye Co., Ltd.è é éparé é

Lors du renvoi du produit, il y a lieu de l'emballer soigneusement et de joindre le certificat de garantie avec les instructions de

réparation. Les nom et adresse de l'acheteur doivent figurer de manière lisible sur le certificat de garantie. Les frais d'assurance, de

manutention et d'envoi notre Service R parations seront supportà é és par le demandeur de la réparation.

Adresse Service Réparations:

2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan

Attn.: CAT EYE Customer Service Section

BEGRENZTE GARANTIE

1-Jahr-Garantie: Auf den Computer

(Ersatzteile/Zubehörteile sowie Batterie nicht eingeschlossen)

Falls w hrend des normalen Gebrauchs Fehler auftreten, wird das entsprechende Teil kostenlos repariertä

oder ersetzt. Die Reparatur mu von CAT EYE Co., Ltd. durchgef hrt werden, und das zu reparierendeß ü

Produkt mu direkt durch den H ndler an CAT EYE Co., Ltd. gesandt werden. Bei der R ckgabe desß ä ü

Gerätes zur Reparatur packen Sie es sorgfältig anbei. Achten Sie darauf, Ihren Namen und Ihre Anschrift

klar und deutlich lesbar auf die Garantiekarte zu schreiben, damit das Ger t so schnell wie m glich nachä ö

Beendigung der notwendigen Reparatur/Einstellung an Sie zur ckgesandt werden kann.ü

Anschrift bei Garantieansprüchen:

2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan

z. H.: CAT EYE Kundendienstabteilung oder wenden Sie sich bitte an den entsprechenden Importeur.

GARANTLEBEPALINGEN

1 jaar garantie, alleen geldig op de computer

(accessoires, aansluitingen en gebruik van batterij uitgezonderd)

Mochten er problemen optreden gedurende normaal gebruik, dan geschiedt reparatie of vervanging kosteloos. Dit

doent door de fabrikant Cateye Co., Ltd. uitgevoerd te worden. Bij terugzending van de computer moet deze zorg-

vuldig verpakt worden en dient het garantiebewijs en een beschrijving van het probleem meegezonden te worden.

Vermeld duidelijk uw naam en adres in blokletters of getypt op het garantiebewijs. Verzekerings- verzend- en

transportkosten zijn voor rekening van de koper.

Service adres:

2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan

ter attentie van: Cateye klantenservice

GARANZIA LIMITATA

1 Anno di Garanzia soltanto sull'Unità Principale

(Gli accessori e la pila sono esclusi dalla garanzia)

In caso di problema durante l'impiego normale, l'unit principale verr riparata o sostituita gratuitamente da Cat Eye Co., Ltd.. Alà à

momento del ritorno del prodotto occorre imballarlo con cura allegandovi il certificato di garanzia con le istruzioni per le riparazioni.

Il nome e l'indirizzo dell'acquirente devono essere presenti in modo leggibile sul certificato di garanzia. Le spese di assicurazione, di

manutenzione e di spedizione al nostro Servizio Riparazioni saranno a carico del richiedente la riparazione.

Indirizzo Servizio Riparazioni:

2-8-25 Kuwazu, Higashi Sumiyoshi-ku, OSAKA 546-0041, Giappone.

Att:Dipartamento Assistenza Clienti

GARANTIA LIMITADA

Se garantiza por un año únicamente el grupo central

(Los accesorios, aditamentos y el consumo de la pila están excluidos)

Si ocurriera alguna aver a durante el uso normal, se reparar o sustituir la pieza o el grupo central. Cat Eye Co., Ltd. deberí á á á realizar

la reparaci n. Para devolver el producto, envu lvalo cuidadosamente y no olvide incluir el certificado de garant a y las instruccionesó é í

para repararlo. Rogamos escribir claramente a mano o a m quina su nombre y direcci n. Los gastos de seguro, manipulaci n yá ó ó

transporte ser n a cargo de la persona que solicite la reparaciá ón.

Dirección para las reparaciones:

2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan

Attn.: CAT EYE Customer Service Section

製品保証について

1 年保証：コンピュータのみ（付属品及び電池の消耗は除く）

正常な使用状態で万一故障した場合は無料で修理・交換いたします。保証書にお客様のお名前・ご

住所・ご購入日・故障状態をご記入の上、製品と共に当社宛て直接お送りください。お送りいただく

際の送料はお客様にてご負担願います。修理完了後、当社より郵送にてお届けさせていただきます。

［宛先］

製品サービス課

〒546-0041 大阪市東住吉区桑津2丁目8番25号

TEL: (06)6719-6863 FAX: (06)6719-2362

O M AD

TSC

CATEYE ASTRALE

CC-CD100

S pe cific at i ons /Caracteristiques techniques/ / /Tec hni sch e daten Specificaties

Caratteristiche tecniche/

Especificaciones

/仕様

Controller/

Calculateur

/ / / /Controler Controleur Elaboratore

Contador

/制御方式

--------------------------------------- 4-bit 1-chip Microcomputer (Crystal Controlled Oscillator)

Display/

Affichage

/ / / /Anzeige Display Visualizzazione

Pantalla

/表示方式

------------------------------------------------------------------------------------ Liquid Crystal Display

Sensor/

Détecteur

/ / / /Sensor Sensor Rivelatore

Sensor

/検知方式

---------------------------------------------------------------------------- No Contakt Magnetic Sensor

Operating Temperature Range/

Temp utilisationérature d’

/ / / /zulässige Betriebstemperatur Toegestane temp. Temperatura di utilizzo 使用温度範囲

--------------------------------------------------------------------------------- 0 C - 40 C(32° ° °F - 104 F)°

TIRE SIZE L(mm)

20 x 1.75 1491

24 x 1 1753

24 x 3/4 Tubular 1785

24 x 1-1/8 Tubular 1795

24 x 1-1/4 1905

24 x 1.75 1890

24 x 2.00 1925

24 x 2.125 1965

26 x 1(559mm) 1913

26 x 1(650c) 1952

26 x 1.25 1953

TIRE SIZE L(mm)

26 x 1-1/8 Tubular 1970

26 x 1-3/8 2068

26 x 1-1/2 2100

26 x 1.40 2005

26 x 1.50 1985

26 x 1.75 2023

26 x 1.95 2050

26 x 2.00 2055

26 x 2.1 2068

26 x 2.125 2070

26 x 2.35 2083

TIRE SIZE L(mm)

700 x 25C 2105

700 x 28C 2136

700 x 30C 2170

700 x 32C 2155

700C Tubular 2130

700 x 35C 2168

700 x 38C 2180

700 x 44C 2224

TIRE SIZE L(mm)

27 x 1 2145

27 x 1-1/8 2155

27 x 1-1/4 2161

27 x 1-3/8 2169

650 x 35A 2090

650 x 38A 2125

650 x 38B 2105

700 x 18C 2070

700 x 19C 2090

700 x 20C 2086

700 x 23C 2096

CO.,LTD.

CATEYE ASTRALE

CC-CD100

CATEYE ASTRALE

CC-CD100

CATEYE ASTRALE

CC-CD100

CATEYE ASTRALE

CC-CD100

O M AD

TS C

CATEYE AS TR ALE

CC-CD 100

OMAD

TSC

CR2032

CC-CD100N II

MAINTENANCE/PRECAUTIONS

• Do not leave the main unit exposed to direct sunlight when the unit is not in use. Do not disas-

semble the main unit, sensor and magnet.

• Do not pay too much attention to your computer's functions while riding! Keep your eyes on the

road and duly consider to traffic safety.

• Check relative position of sensor and magnet periodically.

• If mud, sand or the alike clogs between the buttons and the body, the movement of the buttons

may be disturbed. Softly wash away such objects by water.

• For cleaning, use neutral detergent on soft cloth, and wipe off later with dry cloth. Do not apply

paint thinner, benzine or alcohol, to avoid damages on the surface.

BUTTON FUNCTIONS

●Mode Button (left button)

The display mode mark shift in the illustrated sequence each time

the button is pressed, and the corresponding data is simultaneously

displayed on the sub-display. If the mode button is held for over 2

seconds, 24-hour clock will be displayed.

●Start/Stop Button (right button)

Measuring of the Trip Distance and Elapsed Time is simultaneously

started or stopped when the Start/Stop button is pressed. During

operation the speed scale symbol flickers.

Pressing the mode button can shift the main display from Current

Speed to Cadence when Auto Mode is functioning.

●Set Button (middle button)

When the Set Button is pressed in the stop state in each mode, the

following value can be changed;

• In (O) mode ........................... Wheel Circumference

• In 24-hour Clock mode ......... 24-hour Clock

• In (T),(D),(A) mode ............... on/off the Automatic Start/Stop

○RESET:

Select any mode except Total Distance (O), and press the Mode

button and Start/Stop button simultaneously. The memorized Trip

Distance, Elapsed Time, Average Speed and Maximum Speed will

be erased. (When the two buttons are pressed in O mode, the wheel

circumference stored will be displayed.)

○ALL CLEAR:

When the AC button is pressed, all data stored in memory (trip dis-

tance, speed scale, wheel circumference and clock time) will be

erased. All displays illuminates, then the mile/h symbol alone ap-

pears. This operation should be executed only when irregular dis-

play occurs or no display appears. Since all the memories are

erased, set the main unit again according to "Main Unit Preparation"

MAIN UNIT PREPARATION

○○○○

○The following must be completed before operation.

A battery is already loaded in the main unit when purchased.

●●●●

●Setting Speed Scale

Press AC button on the bottom of the main unit to clear all data (Fig.1). All displays

will illuminate. Then “mile/h“ alone will be displayed as in Fig.2, “km/h“ and “mile/h“

are alternately displayed each time when the Start/Stop button is pressed. Select

either as desired. Press the set button to set the speed scale. The display will

changed as shown in Fig.3.

●●●●

●Setting the wheel circumference

1. How to measure the wheel circumference(Fig.4)

Put a mark on the tire tread and ride the bike one full wheel revolution. Mark the start and

the end of the revolution on the ground and then measure the distance between the two

marks. This is your actual circumference. Or, the "Selecting Values Cross Reference

Table" tells you an approximate circumference according to tire size.

2. Setting the wheel circumference

The figures 2155, standard wheel circumference for 27", will flicker as shown in

fig. 3. When using 2155mm without revision, press the Set button. Current Speed

and Elapsed Time will be displayed and 2155mm is set. To revise 2155mm, press

the Start/Stop button to increase the number by one or press the Mode button to

decrease the number by one. When either button is held down, it will rapidly in-

crease/decrease. Choose a correct circumference between 10mm to 2999mm.

When the desire figure appears, press the Set button. Current Speed and Elapsed

Time will be displayed, then the figure you selected will be set.

3. Resetting or changing the wheel circumference

Set the main unit in the (O) mode with the Mode button, and stop it with the Start/

Stop button. Press the Set button then circumference reset mode will be ready for

operation. Follow instructions given in (2) and revise the circumference as desired.

●Setting the 24-hour clock time

Set the main unit in the mode by pressing the Mode button for over 2 seconds,and

stop it with the Start/Stop button. Press the Set button. The time stored appears, and

the figures for minute flicker. Press the Start/Stop button to advance the figures by

one. When the button is held down, it will rapidly increase. Set a time one or two

minutes ahead of the current time. Press the Mode button. The figures for hour will

flicker. Adjust it by using the Start/Stop button. Press the Set button and the

undisplayed second will return to zero. Setting is completed. *For accurate 24-hour

clock setting, use your radio time signal.(Fig.5)

●How to replace the battery (Fig.6)

If the display becomes invisible from the front, it is time for replacing battery. Prepare

a new battery (CR2032) in advance, before taking out the old battery. Insert a new

battery so that it is tightly fitted to the contact, as shown in the figure. When replac-

ing, be careful not to press the buttons. Replacement must be done promptly (within

20 seconds).

After replacement, don´t press AC button, because the data including total distance

(odometer) is continuously measured.

However, the following malfunction might occur after replacement:

•No display appears.

•Unusual display appears.

•Display is O.K. but button don´t work.

In the above cases, press AC button so that display / buttons returns to normal. (If

AC button is pressed, all the data including odomater is erased. Please refer to

"Main Unit Preparetion" in the operating instructions.)

EOPERATING INSTRUCTIONS

A Main Display

B Mode Symbol

C Mode Button

D Scale Symbol

E Auto Mode Symbol

F Sub-Display

G Set Button

Current Speed

on Main Display

Cadence on

Main Display

H Start/Stop Button

I AC Button

J Battery Case Cover

K Contact A

L Contact B

M Contact C

1Bracket

2Wire

3Speed Sensor (with long wire)

4Cadence Sensor (with short wire)

5Screw

6Sensor Bands-A (L/S)

7Sensor Bands-B (L/S)

8Wheel Magnet

9Cadence Magnet

0Sensor Rubber Pad (2 pcs.)

qBracket Rubber Pad

wNylon Ties

OPEN

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

MEASURING AND DISPLAY FUNCTIONS

SCurrent Speed 0.0(3.0) to 65.9mile/h [27inch] 0.3 mile/h±

The Current Speed is displayed on main display (upper line) and updated once a second. In

Auto-Mode, if you shift the main display from Current Speed to Cadence, Current Speed

moves to the lower line with “S” mark.

OTotal Distance (Odometer) 0.0 to 99,999 mile ±0.1 mile/h

Continuously measured unless all clear operation is done. At 10,000 miles(km),

the increment becomes 1 mile(km). At 100,000 miles(km), it returns to zero and

counting begins anew.

MMaximum Speed 0.0(3.0) to 65.9mile/h ±0.3 mile/h

With Reset operation, it returns to zero and counting begins anew.

AAverage Speed 0.0 to 65.9 mile/h 0.3 mile/h±

The average speed from start to current point is displayed within 27 hours 46

minutes 39 seconds (99.999 seconds) or 999.99 miles (km). If either is ex-

ceeded, (.E) is displayed and calculation ceases.

DTrip Distance 0.00 to 999.99 mile 0.01 mile±

The trip distance from start to current point is displayed. With Reset operation, it

returns to zero.

TElapsed Time 0:00'00" to 9:59'59" 0.003%±

Elapsed time is measured from start to current point, in units of hours, minutes

and seconds. At 10 hours, it returns to zero and counting begins anew. With

Reset operation, it returns to zero.

CCadence 0(20) to 299 rpm (sub-display) 1 rpm (below 100 rpm)±

Cadence[Pedal Revolutions per Minute (rpm)] is displayed on the sub-display. While Auto

Mode is functioning it can be shifted to the main display by pressing the Start/Stop button

and the range is from 0.0(20.0) to 199.9rpm in 0.1rpm increments in this case.

24-hour Clock 0:00' to 23:59' ±0.003%

The Current Time is displayed as a 24-hour Clock on the sub-display.

AUTO (AUTOMATIC START/STOP) FUNCTION

The CC-CD100N has an automatic Start/Stop function (Auto function). This Auto func-

tion switches on/off the unit to start or stop automatically. You don't need to press the

Start/Stop button each time when the Auto function is switched on.

How to switch on/off the Auto function

Set the main unit in the (T),(D), or (A) mode. Press the Set button and the Auto function

will be switched on/off each time the button is pressed. When the Auto function is

switched on, the AT symbol appears.

*When Auto mode is functioning,the Elapsed Time is counted only if the wheel is revolving.

*When the Auto function is switched on, the elapsed time may count about 2 seconds when

you mount the main unit onto the bracket.

While Auto mode is functioning. Pressing the Start/Stop button can shift the Current

Speed to Cadence display. It will return to Current Speed display when Auto function is

released.

POWER SAVING FUNCTION

When the main unit is left without receiving any input for 60-70 minutes continu-

ously, the power will be automatically saved. Then the main unit will display the

clock time only as shown in the figure. Press either the Mode button or Start/Stop

button to release Power Saving mode. (The Power Saving mode is automatically

released when the main unit receives signal from the sensor.)

TROUBLE SHOOTING

• The following situations do not indicate malfunction of the cyclocomputer. Check the following

before taking to repair.

* When current speed does not appear, short-circuit the contact on the back with metal. The unit will

function normally if the speed display appears.

Display response is slow.

.......................... Is it at a low temperature under 32°F(0 C)?°

It returns to normal state when temperature rises.

No display.

.......................... Has the Lithium Battery in the main unit worn out?

Replace the Lithium Battery with a new one.

Incorrect data appear.

Execute "All Clear" operation.

Current speed / Cadence does not appear.

.......................... Is there anything on the contact of the main unit or of the bracket?

.......................... Wipe the contact clean.

.......................... Is the distance between sensor and magnet too far?

.......................... Are the marking line of the sensor and the center of magnet matched each other?

.......................... Refer to "Sensor/Magnet Mounting" and re-adjust correctly.

.......................... Is the wire broken?

.......................... Replace the Bracket & Sensor part with a new one.

Transmission signal loss in damp or wet conditions.

.......................... Water or condensation may collect between the bracket sensor and the computer causing

an interruption in the data transmission.

Wipe the contacts with dry cloth. Contacts can also be treated with a water repellent silicon

jell from an automotive parts or hardware store. Do not use industrial water repellent; it may

damage the bracket.

When the START/STOP Button is pressed, the unit doesn't activate or stop.

.......................... Is the unit in the Auto function?

The START/STOP Button doesn't function in the Auto function.

Speciﬁcations

Applicable Cycle Sizes 10 mm to 2,999 mm

Applicable Fork Diameter 11ø - 36ø (S:11-26ø L:21-36ø)

Power Supply Lithium Battery (CR2032x1)

Battery Life Appro. 3 years

(The life of the first factory-loaded battery may be shorter)

Dimension/Weight 1-15/16"x 1-25/32"x 11/16"(49 x 45 x 17 mm) / 0.9 oz(25.5 g)

*The speciﬁcations and design are subject to change without notice.

Produktspezifikationen

Marke:	Cateye
Kategorie:	Fahrradcomputer
Modell:	Astrale CC-CD100 N II

Brauchst du Hilfe?

Wenn Sie Hilfe mit Cateye Astrale CC-CD100 N II benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Fahrradcomputer Cateye

Cateye CC-ED400 Enduro Bedienungsanleitung

14 Oktober 2024

Cateye Inou MSC-GC100 Bedienungsanleitung

29 September 2024

Cateye Mate CC-3000 Bedienungsanleitung

22 September 2024

Cateye Strada CC-RD430DW Bedienungsanleitung

10 September 2024

Cateye Vectra Wireless CC-VT100W Bedienungsanleitung

5 September 2024

Cateye CC-RD430DW Strada Bedienungsanleitung

3 September 2024

Cateye CC-RD410DW Strada Bedienungsanleitung

1 September 2024

Cateye CC-RD400DW Strada Bedienungsanleitung

27 August 2024

Cateye OS 1.1. Bedienungsanleitung

13 August 2024

Cateye Padrone Smart CC-PA500B Bedienungsanleitung

12 August 2024

Bedienungsanleitung Fahrradcomputer

Neueste Bedienungsanleitung für -Kategorien-

Blackburn Delphi 5.0 Bedienungsanleitung

14 Oktober 2024

Prophete 0512 Bedienungsanleitung

13 Oktober 2024

CicloSport CicloMaster CM 408 Bedienungsanleitung

13 Oktober 2024

Vetta RT255L Bedienungsanleitung

12 Oktober 2024

Filzer dZ4LW3 Bedienungsanleitung

12 Oktober 2024

Falk Pantera Bedienungsanleitung

12 Oktober 2024

Trek Incite 11i Bedienungsanleitung

12 Oktober 2024

Sunding SD-563A Bedienungsanleitung

10 Oktober 2024

Blackburn Delphi 4.0 Bedienungsanleitung

9 Oktober 2024

CicloSport CicloMaster CM 2.11 Bedienungsanleitung

9 Oktober 2024