Carson MS-040 Bedienungsanleitung

Carson Mikroskop MS-040

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Carson MS-040 (2 Seiten) in der Kategorie Mikroskop. Dieser Bedienungsanleitung war fĂŒr 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
INSTRUCTION MANUAL | MS-040
Standard Included Accessories: 10x Wide Field Eyepiece
Eyepiece
360°
Rotatable
Draw Tube
Objective Lens
Reective Light Source
Stage Clips
Focus Knob
Stage
Filter Wheel
Transmitted
Light Source
Power
Intensity Knob
for Reective
Light Source
Intensity Knob for
Transmitted Light Source
(on opposite side)
Base
Turret
Quick-Start Guide:
1. Place microscope on a secure surface. rotate the tube the front facing position or preferredYou may draw to any
360° position.
2. Insert the round end of the power the microscope’s power port on the rear bottom side of the microcord into -
scope, and plug the opposite end of the power standard 110V outlet.cord into any
3. Gently place the narrow end of the eyepiece the tube.into draw
4.
Rotate the objective lens turret so that the rst objective lens (4x labeled a line) is perpendicular the stage.by red to
5. Position your desired specimen on the stage, with your area of interest located in the of the stage.center
6. the stage clips securely hold down your slide or specimen.Use to
Quick-Start Guide:
1. Place microscope on a secure surface. rotate the tube the front facing position or preferredYou may draw to any
360° position.
2. Insert the round end of the power the microscope’s power port on the rear bottom side of the microscope,cord into
and plug the opposite end of the power standard 110V outlet.cord into any
3. Gently place the narrow end of the eyepiece the tube.into draw
4.
Rotate the objective lens turret so that the rst objective lens (4x labeled a line) is perpendicular the stage.by red to
5. Position your desired specimen on the stage, with your area of interest located in the of the stage.center
6. the stage clips securely hold down your slide or specimen.Use to
7. Turn on appropriate light source(s).
i. For transparent specimens such as biological slides, rotate the intensity knob the transmitted light sourcefor to
turn on the light and change light intensity.to
ii. Foropaque orreflective specime otate the int ob for tns,r ensitykn hereflectivelightsourcetoturnonthelight
and change light intensity.to
iii. mixed transparent and opaque specimens, turn on both the reective and transmitted lightFor you may
sources.
8. Focusing:
i. Lookintotheeyepiece youshouldsee whitefieldimage. and a
ii. Gently adjust the focus knob until the image of the specimen comes a crisp focus.into
iii. Adjust light intensity on light sources achieve best image.to
CAUTION: Always take care when focusing, so that the objective lens does not collide down on the specimen, as
you may cause damage objective lens and/or specimen.to
Objective
Eyepiece Total
Lens Magnication
10x 4x 40x
10x 10x 100x
10x 40x 400x
9. Magnication:
i. To change magnication, rotate the objective lens turret so that the desired objective lens is perpendicular to
the stage. Refocus as needed.
10. Color lters be used enhance contrast, especially if using stained slides. use color lters, rotate lter wheelmay to To
until the wheel clicks into the desired color lter.
Care & Maintenance:
‱ Please take care when using our microscope. avoid bringing your microscope contact with dirt,Try to into any
debris, dust or moisture.
‱ Cleaning:
— microscope body, unplug power and use a soft slightly damp cloth clean dust or dirt.For to
— For optical surfaces, such as the eyepiece lens or objective lens, use a slightly damp microber cloth or
Carson’s Lens Cleaners gently dust or debris.to remove
‱ When not in use, it is best store your microscope in original container.to
‱ When moving the microscope, hold the metal neck or base of the microscope body.by
Do not hold the eyepiece lens, tube, or objective turret.by draw
2


Produktspezifikationen

Marke: Carson
Kategorie: Mikroskop
Modell: MS-040

Brauchst du Hilfe?

Wenn Sie Hilfe mit Carson MS-040 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten