Canon LV WX300UST data projector Bedienungsanleitung

Canon Videostrahl LV WX300UST data projector

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Canon LV WX300UST data projector (74 Seiten) in der Kategorie Videostrahl. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/74

ENGLISH

MULTIMEDIA PROJECTOR

User’s Manual

— — i

This publication, including all photographs, illustrations and software, is protected under international

be reproduced without written consent of the author.

Disclaimer

The information in this document is subject to change without notice. The manufacturer makes no

representations or warranties with respect to the contents hereof and speciﬁcally disclaims any implied

warranties of merchantability or ﬁtness for any particular purpose. The manufacturer reserves the right to

revise this publication and to make changes from time to time in the content hereof without obligation of

the manufacturer to notify any person of such revision or changes.

Trademark Recognition

Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registrations

and pending applications in other countries throughout the world.

HDMI, the HDMI Logo, and High-Deﬁnition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC in the United States and other countries.

All other product names used in this manual are the properties of their respective owners and are

acknowledged.

Please note that enlarging or reducing the size of an image for commercial purposes or public

presentation may infringe on the legally protected copyright or the copyright holder of the original material.

About Trademarks

 Ethernet is a registered trademark of Xerox Corporation.

 Microsoft, Windows, Windows Vista, Windows 7, Windows 8 and Aero are registered trademarks or

trademarks of Microsoft Corporation in the United States and / or other countries.

 Mac, Mac OS and Macintosh are trademarks of Apple Inc., registered in the United States and / or

other countries.

 HDMI, the HDMI logo and High-Deﬁnition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing, LLC.

 PJLink is a registered trademark, or an application has been submitted for trademark, in Japan, the

United States and / or other countries or regions.

 AMX is a trademark of AMX Corporation.

 Crestron® , Crestron RoomView® , and Crestron Connected

Ver. 2 ：

— — ii

Projector Installation Notice

 Place the projector in a horizontal position

The tilt angle of the projector should not exceed 15 degrees, nor should the projector be

installed in any way other than the desktop and ceiling mount, otherwise lamp life could decrease

dramatically, and may lead to other unpredictable damages.

 Allow at least 50 cm clearance around the exhaust vent.

 Ensure that the intake vents do not recycle hot air from the exhaust vent.

 When operating the projector in an enclosed space, ensure that the surrounding air temperature

within the enclosure does not exceed operation temperatu while the projector is running, and the re

air intake and exhaust vents are unobstructed.

Verify Installation Location

 Turn on Altitude Mode when located in high altitude areas

 The projector can only be installed upright or inverted.

 When installation the bracket, make sure the weight limit is not exceed and ﬁrmly secured.

 Avoid installing at high temperature, insuﬃcient cooling and heavy dust locations.

 Keep your product away from ﬂuorescent lamps to avoid malfunction caused by IR interference.

 The VGA IN connector should be connected to the VGA IN port. Note that it should be inserted

tightly, with the screws on both sides securely fastened to ensure proper connection of the signal

wire for achieving optimal display eﬀect.

 The AUDIO IN connector should be connected to the AUDIO IN port and CANNOT be connected

to AUDIO OUT or other ports like BNC, RCA; otherwise, it will lead to mute output and even

DAMAGE the port.

 The power cord and signal cable should be connected before power on the projector. During the

projector starting and operating process, DO NOT insert or remove the signal cable or the power

cord to avoid damaging the projector.

Cooling notes

Air outlet

 Make sure the air outlet is 50cm clear of any obstruction to ensure proper cooling.

 Air outlet location should not be in front of the lens of other projector to avoid causing illusions.

 Keep the outlet at least 100cm away from the inlets of other projectors

 The projector generates a massive amount of heat during use. The internal fan dissipates the heat

of the projector when shutting down, and such process may continue for a certain period. After the

project enters STANDBY MODE status, press the AC power button to turn oﬀ the projector and

remove the power cord. DO NOT remove the power cord during the shutdown process, as it may

cause damage to the projector. In the meantime, the delayed heat radiating will also aﬀect the

service life of the projector. The shutdown process may vary depending on the model used.

Whatever the case may be, be sure to disconnect the power cord till after the projector enters the

STANDBY status.

Air inlet

 Make sure there is no object blocking air input within 30 cm.

 Keep the inlet away from other heat sources

 Avoided heavy dust area

Produktspezifikationen

Marke:	Canon
Kategorie:	Videostrahl
Modell:	LV WX300UST data projector
Eingebaute Lautsprecher:	Ja
WLAN:	Nein
Breite:	287.5 mm
Tiefe:	374.5 mm
Gewicht:	5000 g
Produkttyp:	Standard Throw-Projektor
Produktfarbe:	Weiß
Höhe:	167.6 mm
Energiequelle:	AC
Platzierung:	Desktop
RMS-Leistung:	10 W
Anzahl eingebauter Lautsprecher:	2
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Eingebautes Display:	Nein
Kopfhörerausgänge:	1
Anzahl USB 2.0 Anschlüsse:	1
Betriebstemperatur:	5 - 40 °C
Fernbedienung enthalten:	Ja
Zertifizierung:	CE, FCC
Stromverbrauch (Standardbetrieb):	300 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Natives Seitenverhältnis:	16:10
Kontrastverhältnis:	7500:1
Anzahl HDMI-Anschlüsse:	2
Stromverbrauch (Standby):	0.5 W
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-10 - 60 °C
Geräuschpegel:	33 dB
Analoges Signalformatsystem:	NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Audioeingang (L, R):	1
Composite Video-Eingang:	3
Komponenteneingang Video (YPbPr/YCbCr):	1
Unterstützte Video-Modi:	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Unterstützte Grafik-Auflösungen:	640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1360 x 768 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA)
3D:	Nein
DVI Anschluss:	Nein
Mikrofon-Eingang:	Ja
Full-HD:	Ja
Kabelsperre-Slot:	Ja
Slot-Typ Kabelsperre:	Kensington
Integrierter Kartenleser:	Nein
Projektorhelligkeit:	3000 ANSI Lumen
Projektionstechnologie:	DLP
native Auflösung des Projektors:	WXGA (1280x800)
Matrix Größe:	0.65 "
Anzahl der Farben:	1,073 Milliarden Farben
Trapezkorrektur, vertikal:	-40 - 40 °
Projektionsflächenkapazität:	80 - 100 "
Projektionsabstand:	0.282 - 0.445 m
Fokus:	Manuell
Anzahl VGA (D-Sub) Anschlüsse:	3
Serielle Schnittstelle:	RS-232
HDMI-Version:	1.3
Lebensdauer der Lichtquelle:	5000 h
Lampenleistung:	230 W
Typ der Lichtquelle:	Lampe
Anzahl S-Video-Eingänge:	1
Unterstützte Seitenverhältnisse:	16:10
Lebensdauer der Lichtquelle (ökonomischer Modus):	8000 h
Geräuschpegel (Energiesparmodus):	29 dB
Blendenbereich (F-F):	2.5 - 2.5
Projektionsverhältnis:	0.35:1
Video-Farbmodi:	Presentation, sRGB
Verbrauch (Energiesparmodus):	260 W
Feste Brennweite:	5.1 mm
Ethernet/LAN:	Ja