Camry EK9350K Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Camry EK9350K (2 Seiten) in der Kategorie Küchenwaage. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
0 EK-0 E R9 09 2
g
1.
2.
7
6
1. When setting time span, touch "T-SET" to confirm and prompt to next digit. After
setting time span, touch "T-SET" to start counting down. During counting down,
touch "T-SET" to clear the set time span.
2. The timer counts down to "00:00", alarm will start "beeping" for 60 times and
switch off automatically
3. Touch any key to stop "beeping".
4. Max. time span of the alarm timer: 99:59.
scale
will
TO SET ALARM TIMER
WARNING INDICATORS
1. Replace new battery.
2. Scale overload. Remove item to avoid damage.
Max.weight capacity is indicated on the scale.
CLEANING AND CARE
1. Clean the scale with a slightly damp cloth. DO NOT immerse the scale in water or use
chemical/abrasive cleaning agents.
2. All plastic parts should be cleaned immediately after contact with fats, spices, vinegar
and strongly flavored/colored foods. Avoid contact with acids citrus juices.
3. Always use the scale on a hard, flat surface. DO NOT use on carpet.
TEMPERATURE SENSOR
o
1. Temperature range: 0~+40 C
o
2. Division: 0.5 C
Condition 2: "TARE" function
When LCD reading is >1g,
LCD will show-----or0geach time is touched.
“-----means not stable, please wait for a moment. “0g
and meanwhile an icon “TAREon upper left corner of
LCD mean “TAREfunction is active. Max. capacity is
reduced by total weight of all loads.
Z/T”
Temperature
display
Auto shut-off occurs if display shows
'0' or shows the same weight reading
for 2 minutes.
AUTO SHUT OFF
MANUAL SHUT OFF
To maximize battery life, always
" "ON/OFF again to turn off the scale
after using.
touch
Touch "ON OFF"/
to switch on
Touch "T-SET" to start
count down
Touch
"T-SET
Touch
"T-SET”
Touc h T-SET
to begin al arm
ti mer s et t in g
" "
Touch
"T-SET”
Setting 1st binary digit
for minutes
Setting 2nd binary digit
for minutes
Setting 1st binary digit
for seconds
Setting 2nd binary digit
for seconds
5
Touchscreen
INSTRUCTIONS FOR USE
E K- 9 A S E R I E S
ISO 90 01 :20 00 CERTIFI ED BY SGS
ELECTRONIC
KITCHEN SCALES
g
W ater
m l
Mi l k
m l
W ater
Mi l k
kg
kg
fl o z'fl o z'
lb :o z
lb :o z
If the scale is with both measuring system of Metric (g,kg) and Imperial (oz,lb), you can
"UNIT" to convert between two systems during the course of weighing:
. "UNIT" for 3 seconds to convert weight unit between Metric and Imperial systems.
touch
1Touch
2Touch. "UNIT" shortly to convert between weight display and volume (water or milk) display.
"UNIT"
for 3
seconds
Touch
Metric
system:
Imperial
system:
TO CONVERT WEIGHT UNIT
"ZERO" OR "TARE" FUNCTION
Condition 1: "ZERO" function
When LCD reading is negative value or 1g,
LCD will show “-----” or “0g” each time “ is touched.
“-----” means not stable, please wait for a moment. “0g”
and meanwhile an icon “0” on lower left corner of LCD
mean “ZERO” function is active. Max. capacity remains
unchanged.
Z T”/
To weigh different loads consecutively without removing loads from the scale.Put first load on
the scale, get weight reading. button to reset the LCD reading to "0" before adding
next load. You can repeat this operation.
Touch"Z T/
"UNIT"
shortly
Touch
"UNIT"
shortly
Touch
"UNIT" shortly Touch
"UNIT"
shortly
Touch
"UNIT"
shortly
Touch
"UNIT" shortly Touch
CR2032
TO REPLACE BATTERY
1. Open battery case cover on the back of scale.
2. Bend the small contact outwards and the battery will come out.
3. Install new battery by putting one side of battery beneath the
black tab and then pressing down the other side until the
battery is locked.
4. Close the battery case cover.
BATTERY
2x3V lithium cells. Please remove isolation sheet
before use.
black tab
contact
Alarm timer setting
Down / Unit conversion
Up / Zero or tare
Switch
TOUCH BUTTONS ILLUSTRATION
Wa te r
ml
Mi lk
kg
fl o z'
lb :o z
1
FEATURES AND SPECIFICATIONS
. 1 With touch button
.2 With high precision strain gauge sensor
.3 Two unit systems g(kg) lb:oz convertible
. 4 Indicate volume of water and milk
. 5 With alarm timer
. 6 With room thermometer
. 7 With zero/tare function
8 Low battery power/Overload indication.
LCD display area
Effective weighing area
Battery case cover
* Please always put weighing object within effective weighing area .
PRODUCT OUTLINE
LCD DISPLAY
Timer
Alarm
Tare
Negative Value
Zero
Water volume indicator
Milk volume indicator
Room temperature
Temperature unit
Weight unit
Volume unit
Touch buttons
32
g
Wa te r
ml m l
Mi l k
Weight mode Milk volume modeWater volume mode
WOR KING MO DES
A.Place the scale on a soild and flat
surface.
B.Press “ON/OFF” to turn on the
scale.
C.Wait until LCD shows “0”, and
press UNIT button to choose
“water” or “milk” mode.
D.Put a liquid container onto the
scale platform.
E.Press Z/T button to reset LCD
to “0”.
F.Pour liquid (water or milk) into the
container, LCD shows the volume
of the liquid.
G.Press UNIT button to choose
“weight” mode and view the weight
of liquid.
A.Place the scale on a solid and flat
surfase.
B.Place bowl (if used) on the scale
before turning on the scale.
C.Press “ON/OFF” to enter weighing
mode.
D.Wait until LCD shows all information.
E.Load weighing object on to start
weighing,LCD will show the weight
reading.
F.If the weighing object is water or
milk,press UNIT button to choose
volume mode and view the volume
of weighing object.
Wa te r
ml
Wa te r
ml
Wa te r
ml
Wa te r
ml
Wa te r
ml
TO START WEIGHING
4
Remark: The unit system of scale depends on sales destination or the requirement of distributor.


Produktspezifikationen

Marke: Camry
Kategorie: Küchenwaage
Modell: EK9350K

Brauchst du Hilfe?

Wenn Sie Hilfe mit Camry EK9350K benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Küchenwaage Camry

Bedienungsanleitung Küchenwaage

Neueste Bedienungsanleitung für -Kategorien-