Cadel Idro Prince 30 Bedienungsanleitung

Cadel niet gecategoriseerd Idro Prince 30

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Cadel Idro Prince 30 (45 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/45

INSTALLER MANUAL

PELLET THERMOSTOVE

IDRO PRINCE3 12-16-23-23H2O-30-30H2O -

IDRO RIVER3 16-23-23H2O - AQUOS3 16-23-23H2O -

IDRON 16-22 AIRTIGHT - MIRA 16-22 - TESIS 16-23 AIRTIGHT

- HIDROFIRE 22.8 - MAYA3 16-24

IDROSTUFE A PELLET

SUMMARY

1 MANUAL SIMBOLOGY ....................................3

2 PACKAGING AND HANDLING ..........................3

2.1 PACKAGING .............................................................3

2.2 STOVE HANDLING....................................................3

3 CHIMNEY FLUE .............................................3

3.1 INTRODUCTION .......................................................3

3.2 CHIMNEY FLUE ........................................................4

3.3 TECHNICAL FEATURES .............................................4

3.4 HEIGHT-DEPRESSION ..............................................5

3.5 MAINTENANCE ........................................................5

3.6 CHIMNEY POT ..........................................................5

3.7 CHIMNEY COMPONENTS .........................................6

3.8 CHIMNEY FLUE CONNECTION ..................................6

3.9 EXAMPLES OF CORRECT INSTALLATION ..................7

4 COMBUSTION AIR .........................................9

4.1 EXTERNAL AIR INLET ...............................................9

4.2 COMBUSTIBLE AIR INLET FOR SEALED-CHAMBER

INSTALLATION .................................................................10

4.3 COMBUSTIBLE AIR INLET FOR SEALED-CHAMBER

INSTALLATION .................................................................10

5 INSTALLATION AND ASSEMBLY ....................11

5.1 INTRODUCTION .....................................................11

5.2 PREPARATION AND UNPACKING ...........................11

5.3 OVERALL DIMENSIONS .........................................13

5.3.1 IDRO PRINCE3 12 DIMENSIONS ...........................13

5.3.2 IDRO PRINCE3 16-23-23 H2O - IDRO RIVER3 16-23-23

H2O DIMENSIONS...............................................................13

5.3.3 DIMENSIONI STUFA IDRO PRINCE 30 - 30 H2O 14 ....

5.3.4 AQUOS3 16-23-23 H2O DIMENSIONS ...................15

5.3.5 IDRON 16-22 AIRTIGHT - HIDROFIRE 22.8 - MIRA 16-

22 - TESIS 16-23 AIRTIGHT DIMENSIONS ...........................15

5.3.6 MAYA3 16 - 24 DIMENSIONS ...............................16

5.4 MINIMUM DISTANCES ...........................................16

5.5 IDRO PRINCE

3 12-16-23-23 H2O-30-30 H2O - MIRA

16-22 - TESIS 16-23 AIRTIGHT FRAME ASSEMBLY ..........17

5.6 FITTING THE METAL FRAME OF IDRO RIVER

3 16-23-23

H2O ..............................................................................18

5.7 FITTING THE MAIOLICA FRAME OF IDRO RIVER

3 16-

23-23 H2O ........................................................................19

5.8 ASSEMBLING THE TOP CLADDING AND BOTTOM

DOOR ..............................................................................19

5.9 MAYA3 16-24 FRAME ASSEMBLY ..........................20

5.10

ASSEMBLING AQUOS SIDE PANELS

3 16-23-23 H

2O .....

5.11 ASSEMBLING THE IDRON 16-22 AIRTIGHT / HIDROFIRE

22.8 SIDE PANELS / TESIS 16-23 AIRTIGHT ......................22

5.12 ELECTRIC CONNECTION .........................................22

5.13 STOVE POWER SUPPLY ..........................................22

6 SMOKE OUTLET CONNECTION MAYA 3 ...........23

6.1 GENERAL WARNINGS ............................................23

6.2 REAR OUTLET CONNECTION ..................................23

6.3 TOP OUTLET CONNECTION MAYA 3 .......................24

7 PLUMBING CONNECTION.............................24

7.1 PLUMBING SYSTEM CONNECTION.........................24

7.2 CONNECTION DIAGRAM IDRO PRINCE

3 12 25 ...........

7.3

CONNECTION DIAGRAM IDRO PRINCE

3 16-23 - IDRORIVER3

16 - 23 - AQUOS3 16-23 - IDRON 16-22 AIRTIGHT - HIDROFIRE

22.8 - MIRA 16-22 - TESIS 16-23 AIRTIGHT

..........................26

7.4 CONNECTION DIAGRAM IDRO PRINCE 30 .............27

7.5 CONNECTION DIAGRAM (IDRO PRINCE3 23 H2O,

IDRORIVER3 23 H2O, AQUOS3 23 H2O) ...............................27

7.6 CONNECTION DIAGRAM (IDRO PRINCE 30 H

2O) ....28

7.7 CONNECTION DIAGRAM MAYA3 16 - 24 29 ................

7.8 3 BAR DISCHARGE VALVE ......................................29

7.9 WASHING THE SYSTEM .........................................30

7.10 FILLING THE SYSTEM .............................................30

7.11 WATER CHARACTERISTICS ....................................30

7.12 SYSTEM CONFIGURATION .....................................31

7.13 SYSTEM WITH: DIRECT VENT PELLET STOVE AND

ROOM PROBE ...................................................................31

7.14 SYSTEM WITH: DIRECT VENT PELLET STOVE AND

ROOM THERMOSTAT ........................................................32

7.15 SYSTEM WITH: DIRECT VENT PELLET STOVE, ROOM

PROBE, AND DHW BOILER ...............................................33

7.16 SYSTEM WITH: DIRECT VENT PELLET STOVE, ROOM

THERMOSTAT, AND DHW BOILER .....................................33

7.17 SYSTEM WITH: PELLET STOVE AND PUFFER..........34

7.18 SYSTEM WITH: PELLET STOVE, PUFFER, AND

AUXILIARY BOILER (WALL MOUNTED) ............................35

7.19 OPERATING MODE .................................................36

7.20 ELECTRICAL CONNECTIONS ...................................37

7.21 REAR PANEL ..............................................37

8 SPECIAL MAINTENANCE ..............................38

8.1 INTRODUCTION .....................................................38

8.2 FUME CONDUIT CLEANING ....................................38

8.3 SMOKE EXTRACTOR COMPARTMENT CLEANING ...39

8.4 CLEANING THE SMOKE EXTRACTION SYSTEM AND

GENERAL CHECKS ............................................................39

8.5 DOOR CLOSING FUNCTIONALITY PERIODIC CHECK ....39

8.6 REPLACING THE OVERPRESSURE RELIEF VALVE FOR THE

COMBUSTION CHAMBER .................................................40

8.7 FUME PIPES ANNUAL CLEANING .........................40

8.8 GASKET REPLACEMENT .........................................41

9 IN CASE OF ANOMALY ..................................41

9.1 PROBLEM SOLVING ...............................................41

IDROSTUFE A PELLET

1 MANUAL SIMBOLOGY

USER

AUTHORISED TECHNICIAN

(ONLY to interpret or the Stove-manufacturer or the Authorized Techni-

cian of Technical Assistance Service approved by the Stove-manufacturer)

SPECIALIZED STOVE-REPAIRER

CAUTION:

READ CAREFULLY THE NOTE

CAUTION:

DANGER OR IRREVERSIBLE DAMAGE POSSIBILITY

• The icons with the stylized figures indicates whom the subject dealt in the paragraph is addressed to (between the User and/

or the Authorized Technician and/or the Specialized Stove-repairer).

• WARNING symbols indicates an important note.

2 PACKAGING AND HANDLING

2.1 PACKAGING

• The packaging is made up of recyclable cardboard boxes according to RESY standards, recyclable expanded polystyrene inserts

and wooden pallets.

• All packaging materials can be re-used for a similar use or eventually discharged as waste assimilable to the municipal solid

ones, in accordance with current regulations.

• After having removed the packaging please assure you about the integrity of the product.

2.2 STOVE HANDLING

Both whether the stove is packed or not it is necessary to observe the following instructions for handling and transporting the

stove from its sale point to its installation point and for any future movements:

• The stove must be handled with idoneous means paying attention to the existing safety regulations;

• do not turn the stove upside down and/or upset it on one side, but keep it in vertical position or as accorded with the construc-

tor instructions;

• if the stove is made up of ceramic, stone, glass or any particularly fragile material components, all must be moved with the

utmost care.

3 CHIMNEY FLUE

3.1 INTRODUCTION

This chapter about the Chimney Flue has been drawn up in cooperation with Assocosma (www.assocosma.org) and is based on

European Standards (EN 15287 - EN 13384 - EN 1856 - EN 1443) and UNI 10683:2012.

It provides instructions for a good and correct execution of the chimney flue but it does not absolutely replace the current stan-

dards which the qualified manufacturer/installer should comply with.

Produktspezifikationen

Marke:	Cadel
Kategorie:	niet gecategoriseerd
Modell:	Idro Prince 30

Brauchst du Hilfe?

Wenn Sie Hilfe mit Cadel Idro Prince 30 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung niet gecategoriseerd Cadel

Cadel Maya Idro 16 Bedienungsanleitung

5 September 2024

Cadel Magritte 6 Bedienungsanleitung

5 September 2024

Cadel Saturno 24 Bedienungsanleitung

5 September 2024

Cadel Idro Prince 30 Bedienungsanleitung

5 September 2024

Cadel Quasimodo 9 Box Up Bedienungsanleitung

5 September 2024

Cadel River Idro 23 H Bedienungsanleitung

5 September 2024

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-

APC C2C Bedienungsanleitung

18 September 2024

APC AP7868 Bedienungsanleitung

18 September 2024

APC P8VNTG Bedienungsanleitung

18 September 2024

APC P62 Bedienungsanleitung

18 September 2024

APC AP7898 Bedienungsanleitung

18 September 2024

Hama Magnet 00183283 Bedienungsanleitung

18 September 2024

IFM TD2211 Bedienungsanleitung

18 September 2024

Coyote C1CH36FS Bedienungsanleitung

18 September 2024

IFM AC001S Bedienungsanleitung

18 September 2024

Dimplex SRX120EM Bedienungsanleitung

18 September 2024