Buffalo CD474 Bedienungsanleitung

Buffalo Grillplatte CD474

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Buffalo CD474 (32 Seiten) in der Kategorie Grillplatte. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/32
BistroContact
Grill
Instruction manual
Model • Modèle • Modell • Modello • Modelo • Malli:
CD474/DM902/DM903/GJ454/GJ455/ GJ456
UK
Safety Tips
• Position on a flat, stable surface
• A service ent/qualified technician should carry out installation and any repairs if required. Do not remove and components or ag
service panels on this product
• Consult Local and National standards to comply with the following:
• Health and safety at work legislation
• BS EN Codes of practice
• Fire Precautions
• IEE wiring regulations
• Building regulations
• DO NOT use jet/pressure washers to clean the appliance
• DO NOT use the appliance outside
• DO NOT allow oil or fat to come into contact with the plastic components. Clean immediately if contact occurs
• DO NOT store products on top of the appliance
• Always carry, store and handle the appliance in a vertical position and move by holding the base of the appliance
• Do not carry when hot
• Always switch off and disconnect the power supply to the unit before cleaning
• Keep all packaging away from children. Dispose of the packaging in accordance with the regulations of local authorities
• If the power cord is damaged, it must be replaced by a BUFFALO agent or a recommended qualified technician in order to avoid
a hazard
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
Product Description
CD474 - Buffalo Bistro Contact Grill, Single Ribbed plates
DM902 - Buffalo Bistro Contact Grill, Double Ribbed plates
DM903 - Buffalo Bistro Contact Grill, Large Ribbed plates
GJ454 - Buffalo Bistro Contact Grill, Single Flat plates
GJ455 - Buffalo Bistro Contact Grill, Large Flat plates
GJ456 - Buffalo Bistro Contact Grill, Double Flat plates
Pack Contents
Buffalo Bistro Contact Grill
Scr aper
Allen K ey
Should y ou
find
any damage a result transit, please contact y Buffalo dealer immediately. as of our
Installation
Remove your Buffalo Bistro Contact Grill from its packaging and be certain that all protective plastics and residues are thoroughly cleaned
from its surface.
Locate on a firm level surface.
Buffalo recommended that you allow no less than 100mm ventilated gap around the perimeter of this unit. Ensure that the stainless steel
waste tray is correctly positioned.
Connect to the electricity supply using the plug, the Grill is now ready to turn on and operate.
Preparing the cooking surface - make sure the cooking surface is clean, turn the unit on and apply a
generous amount of oil to the plates. Using the thermostat control, set the Grill to 110ËšC, when the Grill has reached temperature, switch off
and carefully wipe any excess oil from the plates.
Telephone Helpline: 0845 146 2887 UK
Operation
The Contact Grill should be turned on at least 5 minutes before use
To get efficient use out of this unit while in intermittent use, it is recommended that the Grill plates remain closed and the thermostat turned
down, when not cooking. This will assist in reducing power consumption and also allow for quicker heat response when needed.
Buffalo recommends that the cooking surface is lightly greased, before each use.
A temperature setting of between 200°Cand 220°C will be sufficient for general cooking. This may vary for particular food types, individual
needs, or experience.
Simply place the food products on the bottom grilling surface and lower the top plate down, and cook to your needs.
IF TOP PLATE BECOMES LOOSE/ STIFF USE THE ALLEN KEY SUPPLIED TO ADJUST THE TENSION. TURN CLOCKWISE TO
TIGHTEN, ANTI-CLOCKWISE TO LOOSEN.
Cleaning, Care & Maintenance
Before starting to clean the Grill, disconnect from the electricity supply by removing the plug from the socket. Clean the cooking surface
regularly, we recommend it is cleaned after every use session.
When the cooking surfaces are still warm, wash with warm soapy water and then rinse thoroughly with
clean water. This will help to stop food sticking to the plates. Remove the fat drip tray and
wash in warm soapy water.
Other surfaces can be wiped over with a damp cloth to remove all food residues. Do not immerse the Contact Grill
in water or use water sprays to clean it.
If grease is permitted to accumulate, it will begin to carbonise into a hard substance that is extremely difficult to remove. To prevent
this, follow the cleaning steps below:
• Always turn OFF the appliance and disconnect from the power supply before cleaning
• Allow the appliance to cool before cleaning, but for best results clean the plates when they are still slightly warm
• Use warm, soapy water and a damp cloth to clean the exterior of the appliance
• Take care when using scrapers to remove cooking residues as they can damage the cooking surface
• Dry thoroughly after cleaning
• A BUFFALO dealer or qualified technician should carry out repairs if required
Scraping
After each use, scrape the appliance with a scraper/grill stone/copper brush or flexible spatula to remove excess fat and food. A waste
tray is provided for the scrapings if necessary
If there is an accumulation of burned fat or food, the cooking surface should be thoroughly scoured and re-seasoned
NOTE: IT IS VITAL THAT THE COOKING SURFACE IS RE-SEASONED AFTER SCOURING
WARNING: DO NOT USE STEEL WOOL AS IT MAY LEAVE SHARDS THAT COULD CONTAMINATE FOOD
Waste tray
This appliance feature a waste tray to collect any liquid or fats that run off during cooking
At least once a day, remove and empty the waste tray before washing with warm, soapy water. Do not allow the tray to overfill, or
excess grease will run out of the overflow hole at the front of the tray
WARNING: DO NOT REMOVE TRAY DURING OT IMMEDIATELY AFTER USE AS THE CONTENTS WILL BE HOT

Produktspezifikationen

Marke: Buffalo
Kategorie: Grillplatte
Modell: CD474

Brauchst du Hilfe?

Wenn Sie Hilfe mit Buffalo CD474 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Grillplatte Buffalo

Buffalo

Buffalo DM903 Bedienungsanleitung

13 August 2024
Buffalo

Buffalo GL179 Bedienungsanleitung

12 August 2024
Buffalo

Buffalo GF452 Bedienungsanleitung

9 August 2024
Buffalo

Buffalo GF453 Bedienungsanleitung

9 August 2024
Buffalo

Buffalo CD679 Bedienungsanleitung

7 August 2024
Buffalo

Buffalo L515 Bedienungsanleitung

25 Juli 2024
Buffalo

Buffalo GJ454 Bedienungsanleitung

23 Juli 2024
Buffalo

Buffalo P109 Bedienungsanleitung

20 Juli 2024
Buffalo

Buffalo CD474 Bedienungsanleitung

8 Juli 2024

Bedienungsanleitung Grillplatte

Neueste Bedienungsanleitung für -Kategorien-

SilverCrest

SilverCrest STYG 2000 B2 Bedienungsanleitung

9 Oktober 2024
Russell Hobbs

Russell Hobbs Classics 19800-56 Bedienungsanleitung

2 Oktober 2024
CaterChef

CaterChef 508200 Bedienungsanleitung

1 Oktober 2024
Küppersbusch

Küppersbusch GW 30 Bedienungsanleitung

30 September 2024
Sencor

Sencor SBG 2052RD Bedienungsanleitung

29 September 2024
Coyote

Coyote C1C28-FS Bedienungsanleitung

24 September 2024
Coyote

Coyote C1SBLP Bedienungsanleitung

24 September 2024
Tefal

Tefal OptiGrill+ Initial GC706D12 Bedienungsanleitung

23 September 2024
Presto

Presto 06620 Bedienungsanleitung

22 September 2024
Coyote

Coyote C2C36 Bedienungsanleitung

21 September 2024