Bremshey Sprinter Control Bedienungsanleitung

Bremshey Heimtrainer Sprinter Control

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bremshey Sprinter Control (52 Seiten) in der Kategorie Heimtrainer. Dieser Bedienungsanleitung war für 42 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/52
Sprinter
Control
OWNER'S MANUAL P. 2-6
BETRIEBSANLEITUNG S. 7-11
MODE D'EMPLOI P. 12-16
HANDLEIDING P. 17-21
MANUALE D'USO P. 22-27
MANUAL DEL USUARIO P. 28-32
BRUKSANVISNING S. 33-37
KÄYTTÖOHJE S. 38-42
SE RI AL NU MBER
SE RI ENNU MM ER
NUME RO D E SE RI E
SE RI ENUM ME R
NUME RO D I SE RI E
NÚME RO D E SE RI E
SE RI ENNU MM ER
SA RJ ANUM ER O
WWW.BREMSHEY.COM
2
O W N E R ' S M A N U A L • S p R I N T E R C O N T R O L
CONtENtS
ASSEMBLY.................................................................43
ADJUSTMENTS..........................................................3
EXERCISING .............................................................4
CONSOLE ..................................................................5
TRANSPORT AND STORAGE...................................6
MAINTENANCE .........................................................6
MALFUNCTIONS .......................................................6
TECHNICAL SPECIFICATIONS .................................6
IMPORtANt SAFEtY
INStRUCtIONS
Read this guide carefully before assembling,
using or servicing your fitness equipment.
Please keep the guide somewhere safe;
it will provide you now and in the future
with the information you need to use and
maintain your equipment. Always follow
these instructions with care. Please note that
the warranty does not cover damage due to
transportation or not following of adjustment
or maintenance instructions described in this
manual.
NOtE ABOUt YOUR
HEALtH
• Before you start any training, consult a
physician to check your health condition.
• If you experience nausea, dizziness or
other abnormal symptoms while exercising,
stop your workout immediately and consult a
physician.
• To avoid muscular pain and strain, begin
each workout by warming up and end it
by cooling down (slow pedalling at low
resistance). Don’t forget to stretch at the end
of the workout.
NOtE ABOUt
tHE EXERCISE
ENVIRONMENt
• The equipment is not to be used outdoors.
• Place the equipment on a firm, level
surface. Place the equipment on a protective
base to avoid any damages to the floor
beneath the equipment.
• Make sure that the exercise environment
has adequate ventilation. To avoid catching
cold, do not exercise in a draughty place.
• In training, the equipment tolerates
an environment measuring +10°C to
+35°C. The equipment can be stored in
temperatures ranging between -15°C and
+40°C. Air humidity in the training or storage
environment must never exceed 90 %.
NOtE ABOUt USING
tHE EQUIPMENt
• If children are allowed to use the
equipment, they should be supervised and
taught how to use the equipment properly,
keeping in mind the child’s physical and
mental development and their personality.
Also make sure that pet animals keep a
safe distance to the product when it is
transporting or used for training.
• Before you start using the equipment,
make sure that it functions correctly in
every way. Do not use a defective piece of
equipment.
• Press the keys with the tip of the finger;
your nails may damage the key membrane.
• Never lean on the meter.
• Never remove the side covers. Do not step
on the frame casing.
• Only one person may use the equipment
at a time.
• Wear appropriate clothing and shoes when
exercising.
• Protect the meter from sunlight and always
dry the surface of the meter if there are
drops of sweat on it.
• The equipment must not be used by
persons weighing over 160 kg/298 lbs.
• The equipment has been designed for
home use. The Bremshey Sport warranty
applies only to defects and malfunctions in
home use (24 months). Further information
on warranty terms can be obtained from your
national Bremshey Sport distributor. Please
note that the warranty terms may vary from
one country to another.
G B
3
O W N E R ' S M A N U A L
•
S p R I N T E R
• Do not attempt any servicing or
adjustments other than those described
in this guide. Everything else must be left
to someone familiar with the maintenance
of electromechanical equipments and
authorised under the laws of the country in
question to carry out maintenance and repair
work.
• The emergency brake can be used to stop
the flywheel immediately by pushing slightly,
to prevent any unwanted motion.
NOtE ABOUt
ASSEMBLING tHE
EQUIPMENt
Start by unpacking the equipment. The
detailed assembly instructions can be
found at the back of this guide. Follow the
instructions in given order.
Before assembly, check the contents of the
package. If a part is missing, please contact
your dealer with the model, equipment serial
no. and spare part no. of the missing part.
You’ll find a spare part list at the back of this
guide. The hardware kit contents are marked
with * in the spare parts list. The directions
left, right, front and back are defined as
seen from the exercising position. Keep the
assembly tools, as you may need them e.g.
for adjusting the equipment. Note that two
people are needed for the assembly.
The packaging includes a silicate bag for
absorbing moisture during storage and
transportation. Please dispose of the bag
once you have unpacked the equipment.
Allow at least 100 cm of clearance around
the equipment. We also recommend opening
the package and assembling the product on
a protective base.
SAVE tHIS INStRUCtION MANUAL
ADJUStMENtS
SEAt ADJUStMENt
Set the right height for you; the basic rule is
that the arch of the foot reaches reaches the
the pedal at its lowest point with the leg almost
straight. Adjust the seat height by loosening
the seat locking knob on the side. Hold on to
the seat with one hand and, using your other
hand, pull the locking knob outwards in order
to enable free seat tube movement upwards
and downwards. Once the height is right, let go
of the knob and the seat locks into place. Turn
the locking knob clockwise to tighten.
NOtE! Always make sure that the locking knob is
properly fastened before starting to exercise!
To adjust horizontal seat position forward and
back, loosen the locking knob under the seat
by turning it clockwise. Adjust the seat to the
desired position and tighten the locking knob
by turning it counter-clockwise.
NOtE! Do not pass the maximum border for the
seat. This can cause damage to the machine.
HANDLEBAR SEtUP
Loosen the locking knob on the side of the
handlebar support then loosen the knob on the
front side of the handlebar, and find the right
position. Tighten the locking knobs. The design
of the handlebar allows you to exercise either
in an upright position or with the upper body
leaning forward. Remember, however, always to
keep your back straight.
To assemble the bottle holder, put the bottle
holder on the mounting bracket with the 2
bolts. (with supplied allen key)
To assemble the monitor, first put in the
batteries, then connect the sensor wire. And
finally click the monitor onto the bracket on the
handlebar (see also assembly instructions on
page 43)
NOtE! Always make sure that the locking knob is
properly fastened before starting to exercise!
ADJUStMENt OF SUPPORt FEEt
If the equipment is not stable, adjust the
adjustment screws below the support feet as
necessary.


Produktspezifikationen

Marke: Bremshey
Kategorie: Heimtrainer
Modell: Sprinter Control

Brauchst du Hilfe?

Wenn Sie Hilfe mit Bremshey Sprinter Control benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Heimtrainer Bremshey

Bedienungsanleitung Heimtrainer

Neueste Bedienungsanleitung für -Kategorien-