Brandt WTD1171A Bedienungsanleitung

Brandt Wasch-Trockner-Kombinationen WTD1171A

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Brandt WTD1171A (16 Seiten) in der Kategorie Wasch-Trockner-Kombinationen. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

WTD1171A

WTC1012A

INSTALLATION, OPERATING AND

MAINTENANCE INSTRUCTIONS

WASHER-DRYER

Safety /environment and savings ........................2

Releasing, moving and levelling ..........................3

Connecting to the cold water supply ..................3

Draining away the waste water ............................3

Connecting to the electricity supply ....................3

Sorting and checking your washing ....................4

Access to the machine’s drum ............................4

Inserting your washing ..........................................4

Closing the drum ....................................................4

Cleaning products ..................................................4

Programming ........................................................5-7

Details of the functions and the options ..........7-8

Changing a programme..........................................9

Automatic safety systems ....................................9

Characteristics ........................................................9

Running maintenance ..........................................10

Cleaning the pump and drying filters ................10

Incidents that may arise ......................................11

Textile care codes ................................................11

Incidents notified on the display,

which you can repair yourself

..........................12

BEFORE READING THESE INSTRUCTIONS, REMOVE THE ILLUSTRATED PAGES IN THE CENTRE OF THIS DOCUMENT

This machine is only designed for domestic use and to wash, rinse, spin and, depending on the model,

dry machine-washable textiles.

• Fill your machine to the maximum. You thereby

optimise your water and electricity consumption.

• Only programme a pre-wash when absolutely

necessary: e.g. for heavily soiled sports or

working clothes, etc.

• A programme with no pre-wash is sufficient for

slightly or moderately soiled clothes.

• For slightly soiled clothes, select a short washing

cycle (or an «Express» cycle, depending on the

model).

• Gauge the amount of detergent according to the

water hardness, the degree of soiling and the amount

of washing. Always follow the manufacturer’s

instructions on the detergent packets.

For washer-dryers:

• If you spin at high speed, little dampness will

remain and you will therefore consume little

electricity. Even synthetic textiles can be spun

before drying.

• Choosing your drying time well also helps to save

water and electricity.

• Avoid wasting water and electricity by not over-

drying your laundry.

Contents

In this manual, you will find the instructions

required for the safety, installation and use of your

machine and the relevant guarantees. Please keep

these and pass them on if you sell the machine.

• Dispose of the packaging and of your worn-out

machine (after rendering it unusable by removing

the hoses, cutting the power cable and breaking

the lock on the lid) in accordance with the

prevailing regulations.

•For a new installation, the machine must be

connected to the water supply with a new hose:

the old hose must not be re-used.

• Do not let children play with the machine or the

cleaning and maintenance products (water

unsuitable for drinking, ingestion of the products,

risk of physical harm, etc.). Keep pets away from

the machine.

• Protect your property and your machine by

checking the condition of the hoses regularly.

Never use solvents, inflammable products,

explosive products or aerosols near to or in your

machine. Use the machine in a well-ventilated,

frost-free area and do not use an extension lead

or a multiple adapter.

• Switch off the power supply to your machine

after use.

• If your machine should break down, call a

qualified washing machine engineer.

• Only use your machine in accordance with the

instructions in this manual. Only use washing and

maintenance products approved for domestic

machines.

Safety advice

Environment and savings

You will find the following symbols used throughout this manual. They mean:

Safety instructions (for your machine and your washing), which must be observed

ᏘAn electrical risk,

Important advice and information

For washer-dryers:

Some liquid detergent manufacturers may provide

a plastic device, meant to be placed in the washing

machine drum together with the laundry, for the

gradual release of the liquid detergent. If you are

using this device, please ensure that it is removed

from the drum before you activate the drying cycle

as its plastic material cannot withstand the high

temperature of the drying process.

THE FOLLOWING OPERATIONS MUST BE

PERFORMED BEFORE YOU USE T HE

MACHINE. FIGs 1 & 2

First of all remove the piece of expanded

polystyrene from under the lid. (Keep the

transport material: you will need it if you

move).

Rear transport clamp FIG. 1 ➀ to ➃

➀Unscrew the 6 screws using a No. 10 tube

spanner or a straight-edged screwdriver.

➁ Remove the clamp.

➂ Free the power cable from the plastic

holder clipping it to the transport clamp.

➃ Plug the holes left by the clamp using the

plugs supplied and re-screw the 4 external

screws into the casing.

Front transport clamp FIG. 2 ➀to ➄

➀Unclip the plinth by pressing simultaneously

on the side knobs and pulling them towards

you.

➁ Unscrew the screw holding the red plastic

«front» clamp.

➂ Remove the front clamp.

➃Plug the hole left by the clamp with the

remaining plug.

➄ Clip the plinth on again.

Setting on castors, moving

To move your machine, unclip and slide the

castor release handle from right to left.

Your machine must not still be on its

castors when in operation.

Check that it is plumb and stable to avoid

vibration during spinning.

Levelling FIG. 6 ➀ ➁

- Set your machine on its castors.

- Unscrew the two screws with a straight-

edged screwdriver.

- Level the machine by adjusting the two feet

using a flat spanner or a pair of pliers.

- Set the machine back on the floor by sliding

the castor release lever to check the

chocking.

- If the machine is correctly level, retighten the

two locking screws.

To align your machine with your units, you can

break off the fixing hooks for the hoses.

Take care not to squash the hoses!

If you cannot avoid installing the machine on a

carpeted floor, adjust the feet so as to leave a

large gap for ventilation.

Connecting to the cold water supply (FIG. 5)

Your washing machine can be connected to

any cold water pipe. Connect the supply hose

provided to a threaded 20x27 Ø tap (3/4 BSP)

not forgetting to insert the seal supplied

(depending on the model, the hose may

already be fitted with a seal).

Water pressure may vary from 0.1 to 1 MPa

(1→10 bars). If the pressure is high, please

provide a pressure regulator. Your water

supplier can provide the necessary advice.

Draining away the waste water (FIG. 5)

NB: Ensure that the drain hose is tied firmly in

place with cord, etc. to avoid a possible flood.

In all cases, the height of the drain hose

bracket must be between 0.80 m minimum

and 1.10 m maximum above the floor. The

hose must be fastened to avoid it breaking

and its opening must be above the surface of

the water being drained away.

Connecting to the electrical supply (FIG. 5)

Please refer to the «Characteristics» section.

The socket must be easily accessible but out

of children’s reach.

The installation must conform to the country’s

regulations, in particular as regards earthing

requirements and installation in shower-

rooms. The machine must be earthed.

Never use an extension lead or a multiple

adapter for connecting to the socket.

* We cannot be held responsible for any

incident caused by poor earthing of the

machine or poor electrical installation.

The machine must be switched off (in the

«Stop» position) when connecting to the

electrical supply.

Releasing your machine

Connecting your machine

Moving and levelling

Produktspezifikationen

Marke:	Brandt
Kategorie:	Wasch-Trockner-Kombinationen
Modell:	WTD1171A

Brauchst du Hilfe?

Wenn Sie Hilfe mit Brandt WTD1171A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Wasch-Trockner-Kombinationen Brandt

Brandt WTD1171A Bedienungsanleitung

5 Juli 2024

Bedienungsanleitung Wasch-Trockner-Kombinationen

Neueste Bedienungsanleitung für -Kategorien-

Summit SPWD2200W Bedienungsanleitung

14 Oktober 2024

Bosch WVD24520EU Bedienungsanleitung

13 Oktober 2024

Hoover WDXOA 486AC-80 Bedienungsanleitung

13 Oktober 2024

Hoover WDXOA496AHFN-80 Bedienungsanleitung

13 Oktober 2024

Indesit WIDXL 146 (UK) Bedienungsanleitung

12 Oktober 2024

Hoover WDXOA 596FN-80 Bedienungsanleitung

12 Oktober 2024

Indesit EWDC 7145 S FR Bedienungsanleitung

12 Oktober 2024

Sanyo SW-160TP Bedienungsanleitung

11 Oktober 2024

Indesit PWDE 8148 S (UK) Bedienungsanleitung

11 Oktober 2024

Siemens WK14D542ES Bedienungsanleitung

10 Oktober 2024