Boss BV9973 Bedienungsanleitung (70 Seiten)

To ensure safety while driving

and to comply with laws,

drivers should not watch video or

operate the video device while driving.

-1-

Content

Precaution......................................

Safety Information.........................

Disc Note.......................................

Installation ....................................

Electric Connection ......................

Remote Control ............................

Basic Operation ............................

Loading/Ejecting a DISC .................

Open/Close Monitor and Angle

Adjustment......................... ........

Main Menu Operation......................

Setting animation...........................

Setting disc....................................

Setting radio...................................

Setting wallpaper............ ................

Version about..................................

Setting time.......... .........................

Setting audio mode.........................

Setting video mode.........................

Setting OSD language....................

Setting illumination color.................

TFT display calibration. ..................

Rear View Camera ........................

Control Panel ................................

Unit keys ........................................

Radio Operation............................

Listening to the radio ......................

Storing and Listening to a memory

station ........................................

18

20

21

22

24

25

26

27

28

29

30

31

32

33

2

3

4

5

7

8

10

11

12

13

14

17

Automatic Memory Storing &

Program Scanning.......................

RDS function..................................

Media Operation.............................

Basic Operation ..............................

Selecting Play Mode ........................

On-Screen Display Function .............

Digital Vid eo Special Function........

Multi-Subtitle Language function.......

Multi-audio language Function..........

Multi-angle Function........................

Ti tl e menu function ..........................

A-B Repeat function.........................

Program function.............................

Step function..................................

Slow speed function........................

AUX Operation ...............................

AV Operation..................................

USB Operation ...............................

Card Operation ..............................

SWC Operation..............................

Parental Control............................

Region Code..................................

Specification .................................

Troubleshooting.............................

-2-

Precaution

THANK YOU FOR PURCHASING PLAYER .

Before operating the unit, read this manual thoroughly and keep it handy

for future reference .

To avoid injury or accident , read the following precautions before

installing and operating the unit .

A BOSS AUDIO MULTIMEDIA

ABOUT THE LIQUID CRYSTAL DISPLAY (LCD) PANEL

Do not press on the LCD panel on the unit as doing so can distort the

picture or cause a malfunction . The picture may become unclear , or the

LCD panel may be damaged .

NOTES ON CLEANING

-Clean the LCD panel with a slightly damp soft cloth.

-Do not use solvents such as benzine, thinner, commercially available

cleaners or antistatic spray .

-Do not use alcohol to clean the screen .

If your car was parked in a cold or hot place, the picture may not be clear .

The monitor is not damaged . The picture will become clear the temper-

ature in your car becomes normal .

DO NOT install any receiver in locations where;

- it may obstruct the steering wheel and gearshift lever operations, as this

may result in a traffic accident.

- it may obstruct the operation of safety devices such as air bags, as this

may result in a fatal accident.

- it may obstruct visibility.

DO NOT operate any receiver while manipulating the steering wheel, as

this may result in a traffic accident.

The driver must not watch the monitor while driving.

IF THE DRIVER watches the monitor while driving, it may lead to

carelessness and cause an accident.

IF YOU NEED to operate the receive while driving, be sure to look ahead

carefully or you may be involved in a traffic accident.

IF THE PARKING BRAKE is not engaged.“ ParkingBrake” flashes on the

monitor, and no playback picture will be shown.

- This warning appears only when the parking brake wire is connected to

the parking brake system built in the car ( refer to the electric connection)

ON INSTALLATION

-3-

Safety Information

CAUTION:

THIS DIGITAL VIDEO PLAYER IS A CLASS I LASER PRODUCT. HOWEVER

THIS DIGITAL VIDEO PLAYER USES A VISIBLE/INVISIBLE LASER BEAM

WHICH COULD CAUSE .

HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE

THE DIGITAL VIDEO PLAYER CORRECTLY AS INSTRUCTED.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT

REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING

INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.

THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.

This product incorporates copyright protection technology that is protected

by method claims of certain U.S. Patents and other intellectual property rights

owned by Macrovision Corporation and other rights owners.Use of this

copyright protection technology must be authorized by Macro vision Corporation,

and is intended for home and other limited viewing uses only unless

otherwise authorized by Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

REGION MANAGEMENT INFORMATION:

This Digital Video Player is designed and manufactured to respond to the Region

Management Information that is recorded on a Digital Vid eo disc. If the Region

number described on the Digital Vi deo disc does not correspond to the Region

number of this Digital Vid eo Player, this Digital Video Player cannot play this disc.

-4-

Disc Note

Preparing New Discs with Rough

Spots

A new disc may have rough edges on

its inside and outside edges. If a disc

with rough edges is used, the proper

setting will not be performed and the

player will not play the disc. Therefore,

remove the ro u gh edges in ad va n ce

by using a ball point pen or pencil as

shown on the right. To remo ve the

rough edges, press the si d e o f t h e pen

or pencil against the inside and outside

edges of the disc.

Rough spots

on

outside edge

Ball point pe n

or pencil

Rough spots

on inside

edge

Do not touch

the

underside

of the disc

Do not

bend

Wipe the disc from

center

toward the outside

edge

Label side

up

Disc Cleaning

Use a dry soft cloth to wipe the surface.

If the disc is quite dirty, use a soft cloth

slightly moistured with isopropyl (rubbing)

alcohol. Never use solvents such as

benzine, thinner or conventional record

cleaners as they may mar the surface of

the disc.

Handling and Cleaning

Dirt, dust, scratches and warping disc

will cause misoperation.

Do not place stickers or make

scratches on discs.

Do not warp discs.

A disc should always be kept in its

case when not in use to prevent from

damaging.

Do not place discs in the following

places:

1.Direct sunlight

2.Dirty, dusty and damp areas

3.Near car heaters

4.On the seats or dashboard

Discs which cannot be played

with this player

Digital Video-RAM

CDV

CDG

Note:

A disc may become somewhat scratched

(although not enough to make it

unusable) depending on your handle it

and conditions in the usage environment.

Note these scratches are not an

indication of any problem with the player.

Disc formats supported by this

player

Digital

Video

VCD

CD

MP3

Audio and Vid eo

Disc size 12 cm

Audio and Vid eo

Disc size 12 cm

Audio

Disc size 12 cm

Audio

Disc size 12 cm

Digital

Vid eo

VCD

CD

MP3

NOTES:

Choose the mounting location where the unit will not interfere with the normal

driving function of the driver.

Before finally installing the unit, connect the wiring temporarily and make sure

it is all connected up properly and the unit and the system work properly.

Use only the parts included with the unit to ensure proper installation. The use

of unauthorized parts can cause malfunctions.

Consult with your nearest dealer if installation requires the drilling of holes or

other modifications of the vehicle.

Install the unit where it does not get in the driver s way and cannot injure the

passenger if there is a sudden stop, like an emergency stop.

If installation angle exceeds 30 from horizontal, the unit might not give its

optimum performance.

Avoid installing the unit where it would be subject to high temperature, such

as from direct sunlight, or from hot air, from the heater, or where it would be

subject to dust, dirt or excessive vibration.

DIN FRONT/REAR-MOUNT

This unit can be properly installed either from "Front"(conventional DIN

Front-mount) or "Rear"(DIN Rear-mount installation, utilizing threaded

screw holes at the sides of the unit chassis). For details, refer to the following

illustrated installation methods.

'

Installation

-5-

30

Installation

-6-

Installing the unit

If you want to take the CHASSIS out of the SLIDE BRACKET HOUSING, first

remove the PLASTIC COVER on both sides , then insert the two KEY PLATES

into the left and the right sides of the chassis as illustrated above.

KEY PLATE

PLASTIC TRIM OUT

KEY PLATE

DASH BOARD

METAL MOUNTING

STRAP

HEX NUT

SPRING WASHER

PLAIN WASHER

TAPPING SCREW

CONSOLE

SLIDE BRACKET

HOUSING

HEX BOLT

SCREWDRIVER

TABS

-8-

Remote Control

18. RPT BUTTON

19. ANG BUTTON

20. 10+ BUTTON

21. LANG/L/R/ST BUTTON

22. A-B/CLEAR BUTTON

23. >II BUTTON

24. >>I BUTTON

25. ZOOM BUTTON

26. EQ BUTTON

27. SUBT BUTTON

29. APS BUTTON

30. MENU BUTTON

31. SETUP BUTTON

32. / / / BUTTON

33. GOTO BUTTON

34. PBC/TITLE BUTTON

35. RDM BUTTON

36. AF BUTTON

37. TA BUTTON

28. POWER BUTTON

1. OSD BUTTON

2. PROG BUTTON

3. LOUD BUTTON

4. 9

5. LOCK BUTTON

6. ANGLE/MO/ST BUTTON

7. LOC/SLOW BUTTON

8. STOP BUTTON

9. I<< BUTTON

12. STEP BUTTON

13. SRC BUTTON

14. MUTE BUTTON

15. BAND BTTON

NUMBER(0~ )BUTTONS

C

10. SELECT BUTTON

11. VOLUME+/- BUTTONS

16. OK BUTTON

17. INT BUTTON

4

3

5

7

9

11

12

14

15

18

17

16

13

6

36

8

10

12

21

37

23

25

22

19

24

26

27

29

31

33

35

34

32

30

28

20

-9-

Remote Control

Using the Remote Control

Face the remote control towards the player front face IR mark (remote control signal

receiver).

Operation angle: About 30 degree in each the direction of the front of the IR mark.

Preparing the Remote Control

1.First push to inside as the direction indicated by the arrow (See )And then

Remove the battery holder as the direction indicated by the arrow (See ).

2.Replace the battery Set a new battery property with (+)side up as illustrated

(See ).

3.Insert the battery holder. Push in the holder to the original position(See ).

1

2

3

4

Inserting the Battery

Note :

The lithium cell in the battery compartment of remote control has been secured for

transport with a plastic . Before initial use please remove this plastic so that the

remote control is ready for operation .

Basic Operation

-10-

POWER ON/OFF

LOADING/EJECTING A DISC

Ejecting a Disc

In disc mode, Press the (2) button on

the front panel to eject the disc .

Loading a Disc

3. The player starts playback the disc

automatically .

2. Insert the disc with printed side facing

up into the disc slot (1) .

1 2

1. Press the POWER ( ) button on the

front panel to turn the device on .

Touch the “OFF” ICON on screen

to turn the unit off . Press the“ ”

onthe front panel to turn It on,

press it again to turn off .

OPEN/CLOSE MONITOR AND

ANGLE ADJUSTMENT

Press OPEN button on front panel, the

monitor will draw out automatically .

OPEN/CLO SE button

FIG.1

When the monitor draws out to a certain

location, it will turn upward automa-

tically and stop at vertical position .

FIG.2

FIG.3

Do not rotate the monitor forcibly to

avoid mechanical damage .

FIG.4

Adjusting the viewing angle .

When the monitor does not move, you

long press button on the panel to

turn the monitor upward or downward

at fine steps to get a desired viewing

angle

; short press that button ( ) on

remote is screen move back or out.

Return the monitor to the central

viewing position, then press OPEN

button on the front panel , the monitor

will turn downward automatically .

FIG.5

-13-

Basic Operation

The RESET button is to be activated for

the following reasons:

A. Initial installation of the unit when

all wiring is completed.

B. All the function buttons do not operate.

C. Error symbol on the display.

Rear Vie w Camera

When connecting the rear view camera

the mirror image of the rear view is auto-

matically displayed on the monitor

when you change the gear to the back

position.

(Note: additional monitor can not display

the image.)

Reset Factory Settings

RESET button is placed on the housing

and must be activated with either a

ballpoint pen or thin metal object.

TREBLE: -7 to +7

Adjust treble level .

BASS: -7 to +7

Adjust bass level .

SUBWOOFER: touch to adjust subwoofer

volume and frequency.

EQ: touch to select audio mode as follow:

USER -> JAZZ -> CLASSIC -> POP -> ROCK

LOUDNESS: touch to select loudness

effect as :OFF -> LOW -> MID -> HIGH

FADER/BALANCE:

BALANCE: R 0-10 to L 0-10

Adjust sound balance between left

and right speakers .

FADE: F 0-10 to R 0-10

Adjust sound balance between front

and rear speakers .

VIDEO SETUP

COLOR: 0 to 32

Adjust the color for the picture-lighter

or darker.

BRIGHTNESS: 0 to 32

Adjust if the picture is too bright or

too dark.

CONTRAST: 0 to 32

Adjust the contrast of the bright and

dark portion.

TINT: 0 to 32

Adjust the tint if the human skin color

is unnatural.

-Adjustable when “NTSC “ is selected

for “NTSC/PAL “ .

LANGUAGE

Touch to select OSD language.

ILLUMINATION COLOR

Touch to select the backlight for all

buttons. Tap auto icon the backlight

change automatically.

CALIBRATION

Touch the arrow as show to calibration

the display.

Video setup interface

RESET

-14-

UNIT KEYS

Control Panel

1. OPEN BUTTON

SEL BUTTON

In normal mode, knob is used to increase or decrease the volume.

To slide the monitor out and stand it up or into the monitor slot, press this button;

To adjust the angle of the monitor, press the 5/ or 6/ to change the angle for

the TFT display.

switch between BASS,TREBLE,

BALANCE, FADE,COLOR,RIGHTNESS, CONTRAST, TINT , REG(in radio mode),

PI(in radio mode), TA(in radio mode), AF(in radio mode), LOUD, SWF, EQ,

TIME 12H/24H, CLOCK,BEEP,EUR/USA FREQ, ANIMATION.

After switching on the desired mode above, rotate VOL knob or press VOL+/

VOL- buttons to set it.

2. and VOL KNOB

the VOL

Press the SEL(except radio mode) to

In radio mode, press the SEL to select MANUAL/AUTO mode, in radio manual

mode to scan the frequency by rotate the VOL knob, select radio auto mode to

cancel the scan function.

4 5 86

7

3

191

17 2 9 15 16

18

11 12 13 1410 20

Control Panel

-15-

4

long pressing |<< or >>| button can automatically search down

or up for an available station beginning from the current frequency; Briefly

pressing |<< or >>| button can manually search down or up for a your desired

station beginning from the current frequency.

In media mode, pressing |<< or >>| button can play the previous or next track;

continuously and long pressing |<< or >>| button can fast backwards or

forwards at the following multiple of normal speed: x2, x4, x8, x20.

6. EQ BUTTON

In any modes, touch the “EQ” range to select one of the preset sound modes:

USER/JAZZ/CLASSIC/POP/ROCK .

The information will display in the monitor as follow :

7. MUTE BUTTON

Press it button to switch of the loudspeakers for a short period. The word MUTE

flashes in the display. Press it again to cancel the mute function. This function

can also be cancelled by rotating the VOL multifunction button.

. RESET BUTTON

10

1 -16. PRESET STATION MEMORY AND >II, INT, RPT, RDM BUTTON

A)In RADIO mode

Go to any preset station by pressing one of the 6preset station(1-6) ,if one of

these buttons is pressed for more than 2 seconds, the stations currently being

listened to will be memorized into the selected preset button.

/5. >>| and |<< BUTTONS

In radio mode,

8. BND BUTTON

In Radio mode, press it repeatedly to select the desired radio band: FM1, FM2,

FM3, AM1(MW1), AM2(MW2) .

9

Press this button to return to factory settings.

. SD CARD SLOT

1

USER

POP

ROCK

CLASSICJAZZ

3. (POWER On/Off )/MODE

Press it to turn on the unit, to switch the device off.

In playback mode, Press it repeatedly to select RADIO, DISC, USB, CARD, AUX,

and AV mode.

Press and hold for two seconds

10:00 AM

10:0

10:00

0

0 AM

AM

Touch Screen Operation

-17-

Selecting The Frequency Band

Touch the screen of “ BAND ” section

repeatedly to select the band , the

message will show in turn :

When an FM stereo broadcast

is hard to receive

Press ST/MO button on the remote

control to select the MONO or STEREO

mode .

Start Searching For a Station

Manual Search

During Radio mode, briefly touch “ ”

to increase frequency by one step of

channel spacing.

FM1 FM2 FM3

AM2(MW2) AM1(MW1)

RADIO OPERATION

Touch the RADIO ICON in home menu

to enter the RADIO mode:

Briefly touch “ ” to decrease frequency

by one step of channel spacing.

Automatic Search

During Radio mode, touch and hold

(for more than 2 seconds ) either “ / ”

ICONS to start search for a radio station

automatically.

To tune in strong-signal FM

Station only (LO/DX function)

Press button on the

remote control to select

mode of Local and

Long-distance traffic news.

Storing and Listening to a

Memory Station

Setting Memory

With this system, a total of 30 stations

can be stored in the memory of six

buttons. Each band stores up to six

preset stations. The stations might be

FM1, FM2, FM3, AM1(MW1), and

AM2(MW2) band.

The operation is as below :

- Store in Memory

>Select the frequency band

> Select the station

>Press and the station until it show

the frequency band your select.

- Retrieve a preset station

Touch the 1-6 ranges briefly to retrieve

a station which had been stored in the

memory in advance the chose number

is shown on display .

In radio mode, LOC

or tap icon

select LOC/DX

Listening to Radio

10:00 AM

10:0

10:00

0

0 AM

AM

FM1 87.50 MHz 4

87.50 90.10 98.10 107.9 100.887.50

10:00 AM

10:0

10:0 AM

AM

0

RADIO

RDS PI MUTE

RDS TA OFF

RDS AF OFF

10:00 AM

10:0

10:0 AM

AM

0

-18-

Touch Screen Operation

Automatic Memory Storing &

Program Scanning

3

RDS FUNCTION

ADJUSTABLE ITEMS:

Automatic Preset Setup

In Radio Mode, touch and keep (for more

than 2 ’ S) the screen of “ ” range to

active automatic station storage.

The radio searches within the current

frequency band, e.g. Fm , for the

stronger signal level until the search cycle

has finished . The six strongest stations

are then allocated to the corresponding

storage locations .

Then the station of the first storage

location is set .

Scan Function

In Radio mode, briefly touch the “ ”

section on the touch screen , the radio

briefly plays all the preset stations of the

frequency band .

In home menu, then touch the “ ”

ICON to enter the set mode, the

message in the display :

REG FUNCTION

at certain times some stations divide up

their programs into regional programs

with varying content .

REG ON : the message “REG ON” will

appears in the display for a few seconds .

Note :

- the display capacity is limited . It is

possible that in the double display mode

some segments of the display are deleted .

- the function REG ON prevents the

radio from switching to alternative

frequency which have a different regional

program content .

REG OFF : the program identification(PI)

of the regional program is ignored during

the search for an alternative frequency

(AF) or a program identification (PI) .

Select RDS REGIONAL to turn RDS

function on or off.

PI MUTE / PI SOUND

(only for radio operation)

f you are in an area where two program

identifications (PI) overlap, you can

select the option PI SOUND and

PI MUTE for playback of the sound.

Alternate switching of the program

identification should be avoided .

PI SOUND :

f switching nevertheless occurs the

sound of another station is heard for

less than one second .

PI SET

Touch to change between PI MUTE and

PI SOUND .

I

ST /MONO STEREO

LOCAL DX

REGION EUR OPE

RDS REGIONAL ON

RADIO

REGION SET

Touch to switch the REGION function

ON and OFF.

TA Traffic Announcement

(Priority For Tr affic Information)

When the TA function is activated, the

TA symbol appears in the display .

During radio operation in one FM

frequency band the search for a traffic

announcement station is started

automatically (TA SEEK) .

If an FM station is being received which

transmits the latest traffic announce-

ments from time to time, the TP display

lights up.

When the TA function is switched on ,

the FM traffic automatically interrupt

CD operation (the word TRAFFIC

appears in the display).

The volume level is increased to the

minimum value for the transmission of

traffic announcements.

After the traffic announcements has

finished, the program that was

previously running is resumed.

Interruption of the TA Function:

If you would like to interrupt the current

traffic announcement, touch the TA

section on screen briefly . This does

switch off the TA mode .

AF FUNCTION

(Alternative Frequencies)

AF is a function that works with the help

of RDS (Radio Data System) and can

only be used with FM stations. The radio

searches in the background for the best

frequency reception of the station that

has been tuned into .

PI MUTE :

the sound of another station is

suppressed .

In Radio mode, touch the cursor button

to switch the TA function ON and OFF .

In Radio mode, touch the cursor button

to switch the AF function ON and OFF .

Touch the AF section on touch screen or

swing and keep the SEL knob in the

TA/AF direction for about 2 seconds ,

the AF function is activated. The AF

symbol appears in the display .

When the AF function has been switched

on, the radio continuously tests the

signal strength of the AF frequency .

The test interval for each AF frequency

depends on the signal strength of the

current station and varies from a few

minutes in the case of weak signals.

Whenever the new AF frequency is

stronger than the station that is currently

tuned in , the radio switched to this

frequency for a short time for a short

time and the message

“NEW FREQUENCY “ is displayed for

one or two seconds.

PTY FUNCTION

In Radio mode, touch screen of “PTY”

range to select the Program type .

PTY Selection of the program type

besides the stations name, some FM

stations also transmit information on the

type of program. This information can

be displayed by your car radio .

Examples of such types of program are :

SPORT NEWS POP WEATHER ......

With PTY function you can specifically

select stations transmitting a particular

type of program. Touch the PTY on screen

repeatedly to call up the PTY selection

menu. The message “PTY SEEK” then

appears briefly in the display .

When PTY has been selected the radio

start searching for corresponding PTY

information and stops when the PTY

information has been found, “NO PTY”

appears in the display. If the PTY

information being searched for no longer

exists, the PTY function automatically

switches to normal mode .

Touch Screen Operation

-19-

Media Operation

In audio play mode, the message will

display as below :

(When Parking Brake is applied .)

Mute function

To select the Equalizer mode

Fast forward

Fast backward

Intro Function

To decrease the volume level

To increase the volume level

Loudness Function

Subwoofer Function

Turning pre-switching for traffic

announcements on and off

Switching on and off an

Alternative frequency

Play/Pause the playing

-20-

Touch Screen Operation

To skip the next track

To skip the previous track

Repeat Function

Random Function

Previous menu

The icons for other mode

(The same icon have the same function

in each mode)

In PHOTO playing ,tap to change

the photo direction.

ZOOM IN and OUT.

For page turning.

10:00 AM

10:0

10:0 AM

AM

0

Touch Screen Operation

-21-

FOR Digital Video :

Tap the icon or press the RPT button

on the remote control to select REPEAT

mode as follows :

REP EAT ALL

CHAPT ER REPEAT REP EAT TI TLE ON ON

REP EAT OFF

Note:

when the JPEG disc playback, in normal

mode, you can use the cursor buttons to

rotate the picture .

Press UP to invert an image .

Press DOWN to mirror an image .

Press LEFT to rotate an image to left .

Press RIGHT to rotate an image to right .

FOR VCD/CD :

Tap the icon or press the RPT button

on the remote control to select REPEAT

mode as follows :

FOR MP3 :

Tap the icon or press the RPT button

on the remote control) to select REPEAT

mode as follows :

FOR CD :

Tap the icon or press the INT button

on the remote control to play the previous

10 seconds part of each track/chapter

on disc.

(Touch it again to cancel this mode)

REPEAT OFF

REPEAT ONE REPEAT ALL

REP EAT ALL

REP EAT ONE REP EAT FOLD ER(or DIR)

REP EAT OFF

SELECTING PLAY MODES

During the Disc playback, select the

“RPT, RDM, INT ” to select your favour

play mode.

1). REPEAT FUNCTION

2). INTRO FUNCTION

Note :

For some VCD2.0 disc (PBC-playback

control), above these buttons may be

unavailable .

Skipping Track

During DISC playback, Touch the

/ section on the touch screen

to skip to next/back one track.

Digital Video/VCD/CD/MP3:

Normal Playback 2x 4x 8x 20x

Rapid Forward/Rapid Reverse

During DISC playback, touch the

screen of “ / ” range the

speed of rapid forward/reverse

changes according to the disc as

follow:

Use the direction keys ( / / / on

remote control to move the enlarged

picture .

Zoom Function

Touch the button repeatedly,

the displayshow as “zoom 2,

zoom 3, zoom 4 , zoom ½,

zoom 1/3, zoom 1/4 , zoom off . ”

Stopping Play

Touch the button on remote to

stop the unit playback. press the

button to start play.

Pause (still picture)

Touch the “ ” section on touch

screen during playback will stop

play temporary, touch it again to

return the normal playback .

BASIC OPERATION

-24-

Digital Video Special Function

Touch Screen Operation

4. Tit le Menu Function

For Digital Vi de o:

If the Digital Video has multiple titles

recorded on the disc. It can select

preferred title from the title menu to start

playback.

- During Digital Vid eo playback, press

TITLE button on the remote .The title

menu is display.

- Select preferred title by the cursor

button and confirmed by press the

ENTER button .

For VCD:

Press TITLE/PBC button on the remote

control while the disc is playing, you can

switch between "PBC ON"and "PBC off"

mode.

MONO LEFT MONO RIGHT

STEREO

MIX-MONO

For VCD/CD:

during playback, touch the AUDIO

section of the touch screen or Press

AUDIO on the remote . It is possible to

switch the sound between monaural

and stereo sound.

2. Multi-Audio Language Function

For Digital Video:

During Digital Video playback ,

touch the icon on touch

screen (or press the LANG

on the remote .) Each time the button is

pressed or touch , number of the audio

soundtrack language changes on

sequential order.

Notes:

- The language number is different

according to the disc.

- Some disc only contain one language

soundtrack

- When no different language soundtra-

ck are recorded will be

display at screen left top corner.

“ INVALID KEY ”

Notes:

- The language number is different

according to the disc.

- Some discs only contain one subtitle

language.

- When no different subtitle language

are recorded, “ INVALID KEY ” will be

displayed at screen left top corner.

During Digital Video playback.

Touch the icon on touch

screen(or press the SUBT on

the remote) .

1. Multi-subtitle Language

Function (for Digital Vid eo Only)

Each time the button is pressed or touch,

number of the subtitle language changes

in sequential order.

During Digital Vi de o playback, touch the

icon on the touch screen .

Each time the button is pressed , the

number of the angel changes in sequen-

tial order .

Notes:

- The angle number is different

according to the disc.

- The function only work for disc having

scenes recorded at different angles.

- When no different angle are recorded,

will be displayed at

screen left top corner.

“ INVALID KEY ”

3. Multi-Angle Function

(for Digital Video Only)

Touch Screen Operation

-25-

5. A-B Repeat

(for Digital Video and VCD)

Press the A-B button if you want to

repeat a specific segment on a disc

that you define:

1. Press the A-B button at a point (A)

where you want it to be the start point

of the repeat segment. Press the A-B

button again at a point (B) where you

want it to be the terminal point of the

repeat segment. Then it will play the

segment repeatedly.

2. To cancel the A-B repeat mode and

resume normal playback, press the A-B

button for the third time.

Note:

During DVD playback, points A and B

can be selected from different chapters.

6. Program Playback

(for Digital Vid eo and VCD)

It allows you to enter the order in which

you want some chapters/tracks in

DVD/VCD to play.

1 During playback, press the PROG

button to enter a program interface

as follows:

2 Use the direction buttons to move

cursor onto the desired place for

inputting the sequence number.

3 Use the number button to input

desired sequence number of title/

chapter/track with desired sequence.

4 After input your favour, press >II

on remote or use the direction buttons

to select play and then press OK on

remote to play the programmed titles/

chapters/tracks in programmed order.

* Tap the display or press stop button

to exit the PROG .

* During VCD playback, if it is in PBC

ON mode, at the same time of entering

the state of program playback, it turns

off PBC mode.

7. Display still frame step by step

(for Digital Vid eo and VCD)

If the unit is currently playing video,

press the STEP button consecutively

to display still frame step by step.

Press the PLAY button to resume

normal playback.

8.Playback with Slow Speed

During video playback , press the

LOC/SLOW button to execute the

Slow Forward function.

Press the PLAY button to resume

normal playback.

PROGRAM

Program interface for DVD

AV Operation

Please plug the RCA <Video input >

on the back of the unit .

Touch the AV IN icon to enter the AV IN

mode.

As the interface show, here is only the

audio output, now tap the icon,

the picture of the auxiliary input video

show on the display and tap the display

again to turn to audio mode.

Now you can watch the video from your

External video equipment such as

Digital Video players, computers, etc.

The function of the icons as follow:

Tap to mute the sound.

Tap to select EQ as the same on the

remote control.

Tap to turn LOUD on or off.

Tap to select subwoofer frequency.

Tap to adjust audio volume.

Turnin g pre-switching for traffic

announcements on and off

Switching on and off an

Alternative frequency

Note: To ensure safety while driving and

to comply with lows, drivers should

not watch video or operate the

video device while driving.

Touch Screen Operation

-27-

10:00 AM

10:0

10:00

0

0 AM

AM

AV INTERFACE 1

10:00AM

AV INTERFACE 2

10:00AM

-28-

Following the diagram below, connect

your USB device to the front panel

USB port . If it is properly connected,

the device will be mounted and start

playing automatically.

USB OPERATION

Touch Screen Operation

1 Current type (highlighted bar) .

2 Audio play mode select.

3 Picture play mode select.

4 Movie play mode select,

5 Current play track .

1 Current type (highlighted bar) .

2 Audio play mode select.

3 Picture play mode select.

4 Movie play mode select,

5 Current play track .

Card OPERATION

The unit can support playback MP3/WMA/

JPEG/MP4 and Divx format which are

stored on SD memory cards .

Please read the following instructions

before you start using a memory card .

Inserting the card as follow:

SD Label side

facing upward

10:00 AM

10:0

10:00

0

0 AM

AM

10:00 AM

10:0

10:00

0

0 AM

AM

1SONG 001

002002

003

004

005

10:00AM

2 3 4

5

1WEDDING MOV03247.MPG

CIMG3080.MOV

10:00AM

2 3 4

5

SD

Marke:	Boss
Kategorie:	DVD-Player
Modell:	BV9973

Boss BV9973 Bedienungsanleitung

Produktspezifikationen

Brauchst du Hilfe?

Bedienungsanleitung DVD-Player Boss

Bedienungsanleitung DVD-Player

Neueste Bedienungsanleitung für -Kategorien-