Boss ATV30BRGB Bedienungsanleitung

Boss Soundbar ATV30BRGB

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Boss ATV30BRGB (2 Seiten) in der Kategorie Soundbar. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of this device.
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter. The Bluetooth antenna cannot be removed (or replaced) by
user. This equipment complies with FCC/ IC radiation exposure limits set forth for
an uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment has very low levels of RF energy that it deemed to comply without
maximum permissive exposure evaluation (MPE). But it is desirable that it should
be installed and operated keeping the radiator at least 20 cm or more away from
person’s body (excluding extremities: hands, wrists, feet and ankles). Alteration
or modications carried out without appropriate authorization may invalidate the
user’s right to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are de-
signed to provide reasonable protection against harmful interference in a residen-
tial installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
□ Relocate or reorient the receiving antenna.
□ Increase the separation between the equipment and receiver.
□ Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
□ Consult the dealer or an experienced radio/TV technician for help.
THIS PACKAGE CONTAINS
1 - ATV30BRGB All-Terrain Speaker System
1 - Bluetooth Multi-Function Controller
1 - Handlebar Mounting Kit
1 - RF RGB LED Remote w/ CR2032 Battery
1 - Quick Connect Power Extension Adaptor
4 - Hi-strength Nylon Mounting Straps
1 - User Manual Quick Start Guide / Poster
1 - Warranty Card
USER MANUAL
QUICK START GUIDE
Thank you for purchasing this
ATV30BRGB All-Terrain Sound System
Please read through these instructions carefully so you will know
how to operate your model properly.
After you have nished reading the instructions, keep this document
in a safe place for future reference.
INFORMATION TO THE USER
INFORMATION TO THE USER
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks is under license.
Other trademarks and trade names are those of their respective owners.
CAUTION!!
ADJUSTMENT OR ALTERATIONS OF THIS DEVICE MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
GETTING TO KNOW YOUR
ATV30BRGB MULTIFUNCTION CONTROLLER (MFC)
BEFORE YOU START
IMPORTANT SAFETY PRECAUTIONS
■ Do not operate mobile equipment while driving a motorized vehicle – safe driving and
safety consideration of others should always be your highest priority.
■ In the event you should notice smoke, strange noises or odor from this product, or any
other abnormal signs, immediately turn o the power and consult your dealer or the nearest
authorized BOSS AUDIO Service Center. Using this product in this condition may result in
permanent damage to the system.
■ Set your volume control at a low setting, then slowly increase the sound until you can
hear it comfortably without distortion, or ear discomfort.
BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:
- Do not turn up the volume so high that you can’t hear what’s around you.
- Use caution or temporarily discontinue use in potentially hazardous situations.
INSTALLATION PRECAUTIONS
WARNING - Always consult a professional installer
■ Do not attempt to install or service this product by yourself. Installation or servicing of this
product by persons without professional training and experience in electronic equipment
and motorized vehicle accessories may be dangerous and could expose you to the risk of
electric shock, injury or other hazards
■ Refer any repairs to a qualied BOSS AUDIO SYSTEMS Service Center
■ The ATV30BRGB can be powered from a vehicles cigarette lighter / auxiliary power port,
or hard wired directly to the battery through an optional relay / accessory switch
■ When wiring directly to the vehicles battery, be sure to disconnect the batteries negative
terminal wire before starting any wiring procedures, it is suggested that an
optional fuse and fuse holder (not included) with minimum rating of be in line with 20 Amps
the positive battery terminal
■ The ground cable length should not exceed 18-inches (See wiring diagram)
■ The ATV30BRGB has a weather resistant design, it should not be submerged in or
under water under any circumstances
■ Use only the installation parts provided with the ATV30BRGB
GETTING STARTED
1
2
3
4
5
6
7
567
4
23
1
MFC - MULTIFUNCTION CONTROLLER
BLUETOOTH INDICATOR LED - BLUE COLOR
POWER INDICATOR LED - RED COLOR
3.5mm AUX-INPUT
PREVIOUS TRACK / Press and hold for VOL -
PLAY/PAUSE / Press and hold for POWER ON
NEXT TRACK / Press and hold for VOL +
CAUTION!! Using other mounting methods may void this warranty
PAIRING & DISCOVERING A NEW BLUETOOTH CONNECTION
1) Power on the ATV30BRGB Play/Pauseby pressing and holding down the multi-
function button for 3 seconds, the 2blue and 3red LEDs will start to alternately ash,
signalling that the ATV30BRGB is now ready for Bluetooth pairing.
NOTE: You have 2 minutes before you must restart this procedure over again.
2) Now that the ATV30BRGB is in pairing mode:
ANDROID users:
a. Go into the of your deviceSettings Menu
b. Enter the Bluetooth Menu
TURN ON Bluetooth SCANc. and press
d. “ATV30BRGB” AVAILABLE DEVICESwill now be displayed under
e. If prompted, enter passcode: 0000
iOS users:
a. Go into the of your deviceSettings Menu iOS
b. Enter the Bluetooth Menu
. TURN ON Bluetoothc
d. “ATV30BRGB” will now be displayed
e. If prompted, enter passcode: 0000
3) If the ATV30BRGB Device List”is not seen, repeat the above steps to refresh the “
4) When the connection is successful, you are now ready to stream music from your favorite
media player to the ATV30BRGB
To avoid battery exhaustion, be sure to occasionally run the
vehicles engine while using this product.
Using this product without running the engine can drain the battery.
BLUETOOTH OPERATION BLUETOOTH OPERATION
RECONNECTION
1) Power on the ATV30BRGB and your last paired device Bluetooth.
2) The unit will now automatically reconnect
3) If your device was previously paired with the ATV30BRGB, but it wasn’t the last paired
device:
a. Ensure no other devices are currently paired
b. Enter the on your device being pairedBluetooth Menu
c. “ATV30BRGB” AVAILABLE DEVICES will display under
d. Choose the “ATV30BRGB” to reconnect
4) If the device is out of range from the ATV30BRGB, it will disconnect automatically:
a. To reconnect once device is back in range, press the Play/Pause
button once
b. The ATV30BRGB will now reconnect to the device
6
23
Tips:
MULTIFUNCTION CONTROLLER BLUETOOTH OPERATION
1) Press the PLAY/PAUSE PLAYonce to start playing music or press the button from
your device touch screen
2) To skip songs or advance, press the buttonNEXT TRACK
3) To select the previous song, press the buttonPREVIOUS TRACK
VOLUME CONTROL
4) To raise the volume the Press and Hold VOL + button 2 ~ 3 seconds
5) To lower the volume the Press and Hold VOL - button 2 ~ 3 seconds
MULTIFUNCTION CONTROLLER AUX-IN OPERATION
1) Power on the ATV30BRGB PLAY/PAUSE by pressing and holding down the multi-
function button for 3 seconds
2) Disconnect any paired in your devices Bluetooth Bluetooth device by turning o
Settings Menu
3) Connect the integrated 3.5mm AUX-IN cable located on right side of the MFC to your
devices headphone jack
4) Route the wire back to ATV30BRGB, secure your device in a safe posistion
VOLUME CONTROL
5) To raise the volume the Press and Hold VOL + button 2 ~ 3 seconds
6) To lower the volume the Press and Hold VOL - button 2 ~ 3 seconds
STREAMING MUSIC
Make sure your device Bluetooth volume is set at 75% level
before stowing
AUX-INPUT
Make sure your device headphone volume is set at 75% level
before stowing.
ATV30BRGB can play audio from any device
that has a 3.5mm headphone audio jack.
YOUR DEVICE
57
6
Tips:
Tips:
MULTI-FUNCTION CONTROLLER MOUNTING
LEFT or RIGHT
FOR ILLUSTRATION PURPOSES
YOUR VEHICLE MAY VARY
FOR ILLUSTRATION PURPOSES
YOUR VEHICLE MAY VARY
RUBBER
SHIM
INSERT
WASHER
LOCK NUT
ALLEN HEAD
BOLT
LOCK NUT
ALLEN HEAD
BOLT
MULTI-FUNCTION
CONTROLLER
UNIT
SNAP
BRACKET
Z-BRACKET
HANDLEBAR
CLAMP
TOOLS NEEDED:
- 12mm Socket, Wrench or Pliers
- 6mm Allen Wrench
BEFORE INSTALLING THIS PRODUCT
When replacing the fuse, be sure to only use a fuse of the rating specied on
this product. To avoid short-circuiting, cover any disconnected leads with insulating
tape. It is especially important to insulate any unused wires, which if left uncovered
may cause a short circuit. When connecting other devices to this product, refer to
the manual for the product to be connected. The black cable is ground, make sure
to connect the ground wire rst. Ensure that the ground wire is properly connected
to metal parts of the vehicles body frame or direct to the battery if your vehicle
does not have a grounded chassis frame The ground wire of this units power amp
and a second powered system must be connected to the frame separately with
dierent screws. If the screw for the ground wire loosens or falls out, it could result
in re or malfunction.
To avoid potential shorts in the electrical
system, be sure to disconnect the (–) bat-
tery cable before installation. Use this unit
with a 12-Volt battery and negative ground-
ing only. Failure to do so may result in a
re or malfunction.
SPEAKER MOUNTING SUGGESTIONS
BLUETOOTH® ENABLED
ALL-TERRAIN SOUND SYSTEM
ATV30BRGB
USER MANUAL
QUICK START GUIDE
ATV30BRGB
USER MANUAL
BLUETOOTH® ENABLED | ALL-TERRAIN SOUND SYSTEM
WITH RF RGB LED REMOTE CONTROLLER
PRINTED IN CHINA
VER:1.0 EN
iPod / iPhone are trademarks of Apple Inc. registered in the U.S. and other countries
Android is a trademarks of Google Inc. registered in the U.S. and other countries.
BOSS Audio Systems is not aliated with Apple Inc. or Google Inc.
0815
BOSS Audio Systems
3451 Lunar Court • Oxnard, CA 93030
www.bossaudio.com | 805-751-4853
Tech Support: www.bossaudio.com/technical-support
BLUETOOTH
• Version: 3.0 w/ EDR
A2DP
• Range: 33ft (10m) Class 2
SPEAKERS
• Dimensions: 6.5
• Impedance: 4Ω
• Cone Type: PP CARBON + RUBBER SURROUND
• Tweeter Size: 1” PEI SOFT DOME
AMPLIFIER
• Maximum Output Power: 450 Watts
• Input impedance: 10kΩ
• Frequency Response: 45Hz-25kHz
GENERAL
• Operational Power: 14.4VDC (10-16V allowable)
• MAX Current Draw: 13.7A
• Replacement Fuse: 15A AGC TYPE
• Color: Black
• Weight: 14.26lbs / 6.47Kg
• Dimensions cm WxHxD: 72.4 x 20.2 x 29.4
• Dimensions Inches WxHxD: 28.50 x 7.95 x 11.58
SPECIFICATIONS
WIRE DIAGRAM
7.95”
(202mm)
28.50”
(724mm)
11.58”
(294mm
20A
Fuse and fuse holder
(not included)
Chassis
ground
point
BATTERY
Mini-DIN
Connector
Fuse is located inside the power adaptor
Turn counter clockwise to open
Replace with 15A AGC Fuse type only
INSERT
Normally open switch
(not included)
INSERT
OPTIONAL DIRECT BATTERY WIRING CIRCUIT
RED
BLACK
Chassis
ground
point
QUICK RELEASE
POWER ADAPTOR
(INCLUDED)
MFC
POWER ADAPTOR
15A
Ground wire
Metal frame
Recommended 12 ~ 14ga Wire
(not included)
Align arrows
• Storage Temperature: 5oF to 113oF / -15oC to 45oC
• Operation Temperature: 14 oF to 140oF / -10oC to 60oC
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
6
57
All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including
photocopying, recording, or other electronic or mechanical methods, without the prior written permission of AVA Enterprises Inc.
Copyright © 2015 BOSS AUDIO Inc.
GETTING TO KNOW YOUR
ATV30BRGB LED RF CONTROLLER
A RF CONTROLLER
1 POWER ON / OFF
2 MODE UP
3 AUTO DEMO (LONG PRESS FOR SINGLE COLOR MODE)
4 SPEED UP
5 BRIGHTNESS UP
6 BRIGHTNESS DOWN
7 MODE DOWN
8 COLOR DOWN
9 COLOR UP
10 SPEED DOWN
A
12
3
4
5
6
7
10
9
8
REPLACEMENT BATTERY - CR2032
USING THE REMOTE CONTROL
When use for the rst time, pull out
the lm protruding the tray
RF controller range: Up to 25ft (LoS)
Do not obstruct the RF remote with metal
Always keep away from small children
Do not store in direct sunlight
Do not submerge in mud and/or water
INSTALLING THE BATTERY
• Slide the tray out on back of the remote
control and insert battery with the (+) and
minus (-) poles pointing in the proper direction
GETTING STARTED
Route strap
through the hole
and to vehicle
frame
Route strap
around the speaker body to vehicle frame
Route strap
through the hole
and to vehicle
frame
CAUTION!!
Mounting straps should be double checked to be sure they are
pulled tight and secure before each use of the vehicle.
MODE
+
SPEED
+
COLOR
+
BRIGHT
+
COLOR
BRIGHT
SPEED
MODE
– –
DEMO
ATV30BRGB-UM-POSTER-STYLE-FINAL-v1.0.indd 2 7/31/2015 6:24:57 PM


Produktspezifikationen

Marke: Boss
Kategorie: Soundbar
Modell: ATV30BRGB

Brauchst du Hilfe?

Wenn Sie Hilfe mit Boss ATV30BRGB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Soundbar Boss

Bedienungsanleitung Soundbar

Neueste Bedienungsanleitung für -Kategorien-