Bosch Sensixx'x B1 TDA2623GB Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bosch Sensixx'x B1 TDA2623GB (2 Seiten) in der Kategorie Eisen. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
004 TDA26..GB/07/12
Customer Service
Great Britain
Bosch Customer Service
Grand Union House
Old Wolverton Road
Milton Keynes
MK12 5PT
UK +44 (0)844 892 8923
IRL +353 (0)1450 2655
www.bosch-home.co.uk
Operating instructions
Solving Minor Problems Yourself
Problem Possible Causes Solution
The iron does
not work or is not
heating up.
Temperature control (I)
on a very low setting.
Turn the temperature control to
the desired position.
Connection problems. Check that the plug is inserted
into the mains socket correctly.
The clothes tend
to stick.
Temperature control (I)
setting is too high.
Turn the temperature control to
a lower setting.
Water comes out
of the soleplate
together with
steam.
Temperature control (I)
setting is too low.
Turn the temperature control to
a higher setting.
Steam regulator (A)
is set too high in
conjunction with a low
temperature.
Turn the steam regulator to a
lower setting.
You have pressed the
shot of steam button
(L) repeatedly wihhout
waiting for 5 seconds
between each press.
Wait 5 seconds between each
press of the shot of steam
button.
Tap or part distilled
water has not been used
(see“Filling the water
tank“ section) or other
products such as fragant
water have been added
to the tank.
Mix distilled water with tap
water as directed in the „Filling
the water tank“ section, and
never add any other products
to the water tank.
Iron is not
steaming.
Steam regulator (A) in
“0” or “calc” position.
Turn the steam regulator to “1”
or “2” position.
No water in tank. Fill the tank.
Scale obstruction of
internal components.
Remove the steam regulator
(A) and clean it. If this does not
help contact an Authorised
Technical Service Centre.
Spray does not
work.
No water in the tank. Add water to the water tank.
Obstructed mechanism. Contact an Authorised
Technical Service Centre.
Water comes
out from the
soleplate before
plugging the
iron in.
The steam regulator (A)
is not properly closed.
Place the steam regulator in the
“0” position.
Deposits come
out through
the holes in the
soleplate.
Traces of lime scale are
coming out of the steam
chamber.
Carry out a cleaning cycle “(see
“Multiple de-scaling system”
section)
The iron begins
to smoke when
switched on.
During first use: Certain
components on the
appliance have been
lightly greased at
the factory and may
produce a little smoke
when initially heated.
This is completely normal and
will stop after a short while.
Flashing lamp on
top of handle (*)
Auto-shut off has been
activated.
Move the iron gently fromside
to side to re-start it.
The lamp will then flash once
before it re-heats.
ca lc
TDA 26..
sensi B1xx
(*) Model dependent
You can download this manual from the local homepages of Bosch
Thank you for buying the TDA26 steam iron from Bosch. This iron has a
lightweight design and is built to perform.
These instructions contain valuable information about the unique features
of this iron and some hints to make ironing easier for you.
Please visit www.bosch-home.co.uk for more product information
or to register your product, just follow the link to the Online
guarantee registration.
Before using the Iron for the first time
Please carry out the following steps:
1. Remove the protective cover from the soleplate before using the iron.
2. While the iron is unplugged, fill the water tank (E) with tap water and
set the temperature control (I) to “max” by lining it up with the pointer
(H).
3. Plug the appliance into the mains and when the iron has reached the
correct temperature (the pilot light [K] goes out), set the steam regulator
(A) to the “2” position.
4. Hold the iron horizontally and repeatedly press the shot of steam button
(L). Any residue should come out of the soleplate (G). It may smoke
and smell – this is normal and will cease after a short while.
5. If necessary, carefully clean the soleplate down with a dry, folded cloth.
Cleaning and Maintenance
! Attention! Risk of burns!
For general cleaning, follow the information below:
Problem Solution
Dirty/lightly marked iron
body or soleplate
Clean the body of iron or soleplate with a
damp cloth then dry it..
Mark develops on
soleplate during use
Set the iron to its maximum temperature
setting. Rub the iron a few times over with
a dry cotton cloth folded several times.
Heavily stained soleplate
While the iron is cold, iron a linen cloth
soaked in white vinegar. Then dampen a
cloth with water and wipe the soleplate
clean and dry thoroughly.
DO NOT de-scale or clean the water tank with cleaning products or
solvents, as these could cause the iron to drip when using the steam
function.
DO NOT use a “professional steam cleaner” for cleaning the appliance.
DO NOT use sharp objects or abrasive products to clean the soleplate or
any other part of the appliance. To keep the soleplate in good condition,
do not allow it to come into contact with metal objects.
GUARANTEE TERMS
The terms of the guarantee for this appliance are in accordance with that
stated by our representative for the country in which it is sold. Details
of those conditions can be obtained from the retailer from whom the
appliance was purchased. The SALES RECEIPT must be presented when
making any claims against the terms of this guarantee. We reserve the
right to make technical modifications.
Environmental Care
This iron has been designed according to ecological criteria related to
sustainable development; analysing its whole lifecycle, from material
selection to its later reuse or recycling; evaluating the improvement
possibilities from a technical, ecological and environmental point of view.
Before throwing a used appliance away, you should make it noticeably
inoperable e.g. cut off the mains lead and be certain to dispose of it in
accordance with current laws and regulations.
Your retailer, town council or local council can give you detailed
information about these.
This appliance is labelled in accordance with
European Directive 2002/96/EG concerning used
electrical and electronic appliances (waste electrical
and electronic equipment – WEEE).
The guideline determines the framework for the
return and recycling of used appliances as applicable
throughout the EU.
Important
This iron has been designed according to ecological criteria,
related to the sustainable development; analyzing its whole
lifecycle, from material selection to its later reusing or recycling;
evaluating the improvement possibilities, from a technical,
economical and environmental point of view.
This appliance has been designed exclusively for domestic use
and must not be used for industrial purposes.
Carefully read through the operating instructions for the appliance
and safeguard them for future reference.
General safety instructions
• The iron must not be left unattended while it is
connected to the supply mains.
• Remove the plug from the socket before filling the
appliance with water or before pouring out the
remaining water after use.
• The appliance must be used and placed on a stable
surface.
• When placed on its stand, make sure that the surface
on which the stand is placed is stable.
• The iron should not be used if it has been dropped,
if there are visible signs of damage or if it is leaking
water. It must be checked by an authorized Technical
Service Centre before it can be used again.
• With the aim of avoiding dangerous situations, any
work or repair that the appliance may need, e.g.
replacing a faulty mains cable, must only be carried
out by qualified personnel from an Authorised
Technical Service Centre.
• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
• Keep the iron and its cord out of reach of children less
than 8 years of age when it is energized or cooling
down.
• This appliance is to be connected and used in accordance with the
information stated on its characteristics plate.
• This appliance must be connected to an earthed socket. If it is
absolutely necessary to use an extension cable, make sure that it is
suitable for 16A and has a socket with an earth connection.
• If the safety fuse fitted in the appliance blows, the appliance will be
rendered inoperative. To restore normal operation the appliance will
have to be taken to an authorised Technical Service Centre.
• In order to avoid that, under unfavourable mains conditions, phenomena
like transient voltage drops or lighting fluctuations can happen, it is
recommended that the iron is connected to a power supply system
with a maximum impedance of 0.27 . If necessary, the user can ask Ω
the public power supply company for the system impedance at the
interface point.
• The appliance must never be placed directly under the tap to fill the
water tank.
• Unplug the appliance from the mains supply after each use, or if a fault
is suspected.
• The electrical plug must not be removed from the socket by pulling
the cable.
• Never immerse the iron in water or any other fluid.
• Do not leave the appliance exposed to weather conditions (rain, sun,
frost, etc.)
2 Filling the water tank
Set the steam regulator (A) to the “0” position (no steam) by
lining it up with the pointer (B) on the iron and unplug the iron
from the mains!
1. Place the iron at an angle of 45° with the point facing upwards.
2. Fill the water tank (E) via the water tank inlet (C) but never above the
“max” mark (F) using the beaker * (N).
Use only clean water from the tap and do not mix anything with it. The
addition of other liquids, such as perfume, will damage the appliance.
DO NOT use condensation water from tumble dryers, air conditioners
or similar appliances. This appliance has been designed to use normal
tap water.
To prolong the optimum steam function it is possible to mix tap water
with distilled water 1:1. If the tap water in your district is very hard, mix
tap water with distilled water 1:2.
You can inquire about the water hardness with your local water supplier.
3 Setting the temperature
The temperature control (I) adjusts the temperature of the
soleplate (G).
1. Check the temperature instructions shown on the care label of the
garment you are ironing and set the temperature control (I) to the
corresponding position by lining it up with the temperature control
pointer (H) on the iron:
Fabric Temperature Setting
Synthetics •
Silk - Wool ••
Cotton - Linen •••
2. If you are unsure what type of material the garment is made from, start
ironing on the lowest temperature setting and increase accordingly. If
the garment is made from mixed fabrics, set the temperature for the
most delicate material.
3. For silk, woollen or synthetic materials iron the reverse side of the fabric
to prevent shiny patches. Avoid using the spray function to prevent
stains.
4. Sort your garments based on their care labels, always starting with
those that have to be ironed at the lowest temperature.
5. The pilot light on the top of the handle (K) will stay lit while the iron
is heating up and go out once the selected temperature has been
reached. Wait for a few seconds after the light goes out before you
start ironing. Once the iron is ready, you can continue to iron even if
the pilot lamp comes on again.
6. If your iron has auto shut-off and the pilot light is flashing, the auto-shut
off has activated. Gently move the iron from side to side to restart it.
4 Ironing with steam
The steam regulator (A) is used to adjust the amount of steam
produced when ironing.
1. Make sure that there is water in the tank (E).
2. Adjust the temperature control (I) and then set the steam regulator (A)
according to the table below by lining it up with the steam regulator
pointer (B). Steam will automatically be produced.
Temperature
Setting
Steam Regulator
Setting
••• to “max” 2
•• 1
3. You can get extra steam by pressing and holding the steam regulator
(A) for a maximum of 2 seconds.
Note: At a temperature setting of “•”, the soleplate is not hot enough to
produce steam, so the steam regulator (A) should be set to the “0” position
to avoid water dripping from the soleplate (G).
5 Ironing with shot of steam
This can be used to remove stubborn wrinkles or to press in a
sharp crease or pleat. It cannot be used on a synthetic setting
for delicate items.
1. Make sure that there is water in the tank (E).
2. Set the temperature control (I) to the “•••” or “max” position and the
steam regulator (A) to the “2” position.
3. Press the shot of steam button (L) on the handle repeatedly at intervals
of 5 seconds.
6 Vertical steaming with shot of steam
This can be used to remove creases from hanging clothes,
curtains etc. It cannot be used on a synthetic setting for
delicate items.
WARNING! Do not vertical steam while the item is being worn.
Never spray or aim steam at people or animals!
1. Make sure that there is water in the tank (E).
2. Set the temperature control (I) to the “•••” or “max” position and the
steam regulator (A) to the “2” position.
3. Hold the iron in an upright position about 15 cm away from the garment
being steamed.
4. Press the shot of steam button (L) on the handle at intervals of 5
seconds, however, after 4 jets of steam, wait for 10 seconds to allow
for continued steam production.
7 Ironing without steam
This function enables the iron to be used for dry ironing.
1. Set the steam regulator (A) to the “0” position.
2. Select an appropriate temperature for the type of material being
ironed.
8 Spray
This can be used to remove stubborn wrinkles.
1. Do not use the spray function with silk as staining may occur.
2. Make sure that there is water in the tank (E).
3. When ironing, press the spray button (M) and water will spray out of
the spray outlet (D) onto the garment.
9 After finishing each ironing session
1. Unplug the iron from the mains socket.
2. Set the steam regulator (A) to the “0” position.
3. Hold the iron upside down over a sink and shake it gently until all the
water has come out from the water tank inlet (C).
4. Set the iron aside in a vertical position to cool down.
5. Coil the power cable (J) loosely around the heel of the iron before
storing.
6. Store the iron in an upright position.
10 Multiple de-scaling system
This range of irons is equipped with the following descaling
features “AntiCalc”.
A. self-clean
Each time you use the steam regulator (A), the “self-clean” system cleans
the mechanism of any scale deposits.
B. calc’n clean
The “calc’n clean” function helps to remove scale particles out of the
steam chamber. Use this function approximately every 2 weeks:
1. Fill the water tank (E) with water.
2. Set the temperature control (I) to the “•••” or “max” position and plug
in the iron.
3. After the necessary warm-up period, unplug the iron.
4. Hold the iron over a sink (the correct way up) and remove the steam
regulator (A) by turning it to the “calc” position while pressing it down,
then carefully taking out the spring wrapped around the needle.
5. Using one fully filled beaker * (approximately 150 ml) slowly pour water
into the steam regulator hole (see picture below).
6. Gently shake the iron. Boiling water and steam will come out of the
soleplate (G), carrying scale or deposits that might be there. When the
iron stops dripping, reassemble the steam regulator by reinserting it,
lining up the “calc” position with the pointer, pressing it in and turning
it to the “0” position.
7. If the steam regulator needle is soiled, remove any deposits from the
tip with vinegar and rinse it off with clean water.
C. anti-calc (model dependent)
The anti-calc cartridge has been designed to reduce the build-up of scale
produced during steam ironing, helping to extend the useful life of your
iron. Nevertheless, the “anti-calc” cartridge cannot remove all of the scale
that is produced naturally over time.
11 Anti-drip system "Drip Stop"
The irons in this range are equipped with an anti-drip system.
This will automatically stop the iron producing steam when the selected
temperature setting is too low to prevent water from dripping out of the
soleplate.
You may hear a clicking sound when this system is in operation.
Using Your Iron
1 Your iron
Additional Features (Model Dependent)
Large filling inlet with lid
Auto shut-off “Secure”
Some irons in this range are equipped with an auto-shut off system.
The “Secure” auto shut-off function switches off the iron automatically
when it is not being used, thus helping to prevent accidents and saving
energy. When the appliance is first plugged in, this function will be inactive
for the first 2 minutes to allow it to reach the set temperature.
If during ironing, the iron is not moved for a certain length of time, the
iron will automatically switch off. The length of time will depend on the
position the iron has been left in:
Horizontally (flat) or on its side: 30 seconds
Vertically (upright): 8 minutes
The pilot light on the top of the handle (K) will flash when auto shut-off
has been activated. To switch the iron back on, move it gently from side
to side. The light will stop flashing.
Tips to help you save energy
Steam production consumes the most energy. To help minimise the
energy used, follow the advice below:
• Start by ironing the fabrics that require the lowest ironing
temperature.
• Regulate the steam according to the selected ironing temperature.
• Only use steam if necessary. If possible, use the spray function
instead.
• Try to Iron the fabrics while they are still damp and reduce the steam
setting. Steam will be generated from the fabrics rather than the iron.
If you tumble dry your fabrics before ironing them, set the tumble
drier to the ‘iron dry’ programme.
• If the fabrics are damp enough, turn off the steam regulator
completely.
• Stand the iron upright during pauses. Resting it horizontally with the
steam regulator on generates wasted steam.
Produktspezifikationen
| Marke: | Bosch |
| Kategorie: | Eisen |
| Modell: | Sensixx'x B1 TDA2623GB |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Bosch Sensixx'x B1 TDA2623GB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Eisen Bosch
13 Oktober 2024
28 September 2024
25 August 2024
24 August 2024
22 August 2024
22 August 2024
17 August 2024
17 August 2024
7 August 2024
Bedienungsanleitung Eisen
- Eisen Sinbo
- Eisen AFK
- Eisen Clatronic
- Eisen Domo
- Eisen Emerio
- Eisen G3 Ferrari
- Eisen Coline
- Eisen Tristar
- Eisen Sanyo
- Eisen Nedis
- Eisen Philips
- Eisen SilverCrest
- Eisen Sunbeam
- Eisen Panasonic
- Eisen Clas Ohlson
- Eisen Quigg
- Eisen Adler
- Eisen Beper
- Eisen Bestron
- Eisen Camry
- Eisen Princess
- Eisen Trisa
- Eisen AEG
- Eisen Aigostar
- Eisen Ambiano
- Eisen Siemens
- Eisen Concept
- Eisen Electrolux
- Eisen Fagor
- Eisen Gorenje
- Eisen Jata
- Eisen Klarstein
- Eisen Lervia
- Eisen Miele
- Eisen Severin
- Eisen Unold
- Eisen Bomann
- Eisen Essentiel B
- Eisen H.Koenig
- Eisen Korona
- Eisen Melissa
- Eisen OK
- Eisen Russell Hobbs
- Eisen Taurus
- Eisen Tefal
- Eisen Vox
- Eisen Day
- Eisen ECG
- Eisen König
- Eisen Mesko
- Eisen Telefunken
- Eisen Black And Decker
- Eisen Arzum
- Eisen BEKO
- Eisen Blaupunkt
- Eisen Brabantia
- Eisen Braun
- Eisen Eldom
- Eisen Eta
- Eisen Grundig
- Eisen Heinner
- Eisen Hotpoint
- Eisen Inventum
- Eisen Krups
- Eisen Moulinex
- Eisen Primo
- Eisen Solac
- Eisen Tomado
- Eisen Wilfa
- Eisen AEG-Electrolux
- Eisen Alpina
- Eisen Exquisit
- Eisen Haier
- Eisen Hoover
- Eisen Privileg
- Eisen Frigidaire
- Eisen Svan
- Eisen King
- Eisen Philco
- Eisen Hitachi
- Eisen Hyundai
- Eisen Orava
- Eisen Orion
- Eisen Tesla
- Eisen Livoo
- Eisen Polti
- Eisen Easy Home
- Eisen Elica
- Eisen ProfiCare
- Eisen Elta
- Eisen Beem
- Eisen Jura
- Eisen Kooper
- Eisen Lümme
- Eisen Morphy Richards
- Eisen Rowenta
- Eisen Sencor
- Eisen DeLonghi
- Eisen Turmix
- Eisen Singer
- Eisen Maxwell
- Eisen Ariete
- Eisen Kalorik
- Eisen Optimum
- Eisen Rotel
- Eisen Scarlett
- Eisen Ufesa
- Eisen Calor
- Eisen Cecotec
- Eisen Zephir
- Eisen Punktal
- Eisen Termozeta
- Eisen LELIT
- Eisen Laurastar
- Eisen Matsui
- Eisen Cleanmaxx
- Eisen Domena
- Eisen Shark
- Eisen Maxxmee
- Eisen Nova
- Eisen Elba
- Eisen MPM
- Eisen Thomas
- Eisen Imetec
- Eisen Logik
- Eisen Team
- Eisen Andis
- Eisen JML
- Eisen Watshome
- Eisen Proline
- Eisen Westinghouse
- Eisen Lagrange
- Eisen Maxim
- Eisen Johnson
- Eisen Waves
- Eisen Vivax
- Eisen OBH Nordica
- Eisen Profilo
- Eisen Zelmer
- Eisen Breville
- Eisen Innoliving
- Eisen Jocca
- Eisen Vitek
- Eisen Mellerware
- Eisen Proctor Silex
- Eisen Ursus Trotter
- Eisen Swan
- Eisen Drew & Cole
- Eisen Hamilton Beach
- Eisen Orbegozo
- Eisen Izzy
- Eisen Saturn
- Eisen Defy
- Eisen Duronic
- Eisen Elgento
- Eisen Farberware
- Eisen Jocel
- Eisen Kambrook
- Eisen Oster
- Eisen Steamfast
- Eisen Sunny
- Eisen Grunkel
- Eisen Tower
- Eisen Vanguard
- Eisen Vaporella
- Eisen Kunft
- Eisen Becken
- Eisen Nevir
- Eisen Girmi
- Eisen Conair
- Eisen Lenoxx
- Eisen Flama
- Eisen Malmbergs
- Eisen Di4
- Eisen Khind
- Eisen Koblenz
- Eisen LERAN
- Eisen Currys Essentials
- Eisen Gallet
- Eisen Lafe
- Eisen Inno-Hit
- Eisen DPM
- Eisen Robinhood
- Eisen Create
- Eisen Brentwood
- Eisen BEP
- Eisen Britania
- Eisen CHI
- Eisen Michelini
- Eisen Imarflex
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
14 Oktober 2024
13 Oktober 2024
12 Oktober 2024
12 Oktober 2024
11 Oktober 2024