Bosch GHO12V-08N Bedienungsanleitung
Bosch
Multifunktionswerkzeug
GHO12V-08N
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bosch GHO12V-08N (48 Seiten) in der Kategorie Multifunktionswerkzeug. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/48
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
Operating/Safety Instructions
Consignes d’utilisation/de sécurité
Instrucciones de funcionamiento y seguridad
IMPORTANT
Read Before Using ●IMPORTANT
Lire avant usage ●IMPORTANTE
Leer antes de usar
For English Version
See page 2 ●Version française
Voir page 16 ●Versión en español
Ver la página 31
Call Toll Free for Consumer Information and Service Locations
Pour obtenir des informations et les adresses de nos centres de service après-vente, appelez ce numéro gratuit
Llame gratis para obtener información para el consumidor y ubicaciones de servicio
GHO12V-08
2610052962_GHO12V-08 7/2/19 1:43 PM Page 1
-2-
▶ Work area safety
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
▶ Electrical safety
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce
risk of electric shock.
Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if
your body is earthed or grounded.
Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of
electric shock.
When operating a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
If operating a power tool in a damp
location is unavoidable, use a Ground
Fault Circuit Interrupter (GFCI)
protected supply. Use of an GFCI reduces
the risk of electric shock.
▶ Personal safety
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool
while you are tired or under the influence
Read all safety warnings, instructions, illustrations and specifications
provided with this power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
General Power Tool Safety Warnings
Safety Symbols
The definitions below describe the level of severity for each signal word. Please read the
manual and pay attention to these symbols.
!
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
2610052962_GHO12V-08 7/2/19 1:43 PM Page 2
-3-
General Power Tool Safety Warnings
of drugs, alcohol or medication. A moment
of inattention while operating power tools
may result in serious personal injury.
Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearin g
protection used for appropriate conditions
will reduce personal injuries.
Prevent unintentional starting. Ensure the
switch is in the off-position before
connecting to power source and / or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger
on the switch or energizing power tools
that have the switch on invites accidents.
Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in
personal injury.
Do not overreach. Keep proper footing
and balance at all times. This enables
better contr ol of the p ower tool in
unexpected situations.
Dress properly. Do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of dust
collection can reduce dus t-related
hazards.
Do not let familiarity gain ed from
frequent u se of tools allow you to
become complacent and ignore tool
safety principles. A careless action can
cause severe injury within a fraction of a
second.
▶ Power tool use and care
Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it
was designed.
Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be repaired.
Disconnect the plug from the power
source and/or remove the battery pack, if
detachable, from the power tool before
making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk
of starting the power tool accidentally.
Store idle power tools out of the reach of
children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and any
other condition that may affect the power
tool’s operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Keep handles and grasping surfaces dry,
clean and free from oil and grease.
Slippery handles and grasping surfaces do
not allow for safe handling and control of
the tool in unexpected situations.
▶ Battery tool use and care
Recharge only wi th the charger
specified by the manufacturer. A charger
that is suitable for one type of battery
pack may create a risk of fire when used
with another battery pack.
Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
When battery pack is not in use, keep it
away from other metal objects like
paper clips, coins, keys, nails, screws,
or other small metal objects that can
make a connection from one terminal to
2610052962_GHO12V-08 7/2/19 1:43 PM Page 3
Produktspezifikationen
| Marke: | Bosch |
| Kategorie: | Multifunktionswerkzeug |
| Modell: | GHO12V-08N |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Bosch GHO12V-08N benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Multifunktionswerkzeug Bosch
21 Mai 2024
2 März 2024
31 Dezember 2023
20 Juni 2023
20 Juni 2023
20 Juni 2023
20 Juni 2023
17 Juni 2023
10 Juni 2023
10 Mai 2023
Bedienungsanleitung Multifunktionswerkzeug
- Multifunktionswerkzeug Hama
- Multifunktionswerkzeug SilverCrest
- Multifunktionswerkzeug SKS
- Multifunktionswerkzeug Makita
- Multifunktionswerkzeug Parkside
- Multifunktionswerkzeug Vonroc
- Multifunktionswerkzeug AEG
- Multifunktionswerkzeug Taurus
- Multifunktionswerkzeug Powerfix
- Multifunktionswerkzeug Black And Decker
- Multifunktionswerkzeug Cocraft
- Multifunktionswerkzeug FERM
- Multifunktionswerkzeug Ryobi
- Multifunktionswerkzeug Topcraft
- Multifunktionswerkzeug Einhell
- Multifunktionswerkzeug Festool
- Multifunktionswerkzeug Worx
- Multifunktionswerkzeug Hikoki
- Multifunktionswerkzeug Metabo
- Multifunktionswerkzeug Stanley
- Multifunktionswerkzeug Güde
- Multifunktionswerkzeug Dremel
- Multifunktionswerkzeug Proxxon
- Multifunktionswerkzeug Dedra
- Multifunktionswerkzeug Leatherman
- Multifunktionswerkzeug Robust
- Multifunktionswerkzeug Baumr-AG
- Multifunktionswerkzeug Bavaria
- Multifunktionswerkzeug Toolcraft
- Multifunktionswerkzeug Fein
- Multifunktionswerkzeug EGO
- Multifunktionswerkzeug Powerplus
- Multifunktionswerkzeug Lezyne
- Multifunktionswerkzeug Victorinox
- Multifunktionswerkzeug Ozito
- Multifunktionswerkzeug Porter-Cable
- Multifunktionswerkzeug Meister Craft
- Multifunktionswerkzeug MTM
- Multifunktionswerkzeug McKenzie
- Multifunktionswerkzeug Ergotools Pattfield
- Multifunktionswerkzeug Donau Elektronik
Neueste Bedienungsanleitung für -Kategorien-
26 Juni 2024
26 Juni 2024
26 Juni 2024
25 Juni 2024
23 Juni 2024
10 Juni 2024
7 Juni 2024
7 Juni 2024
7 Juni 2024
7 Juni 2024