Bosch GDS18V-221B25 Bedienungsanleitung
Bosch
Multifunktionswerkzeug
GDS18V-221B25
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr Bosch GDS18V-221B25 (40 Seiten) in der Kategorie Multifunktionswerkzeug. Dieser Bedienungsanleitung war fĂŒr 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/40
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
Operating/Safety Instructions
Consignes dâutilisation/de sĂ©curitĂ©
Instrucciones de funcionamiento y seguridad
IMPORTANT
Read Before Using âIMPORTANT
Lire avant usage âIMPORTANTE
Leer antes de usar
For English Version
See page 2 âVersion française
Voir page 14 âVersiĂłn en español
Ver la pĂĄgina 27
Call Toll Free for Consumer Information and Service Locations
Pour obtenir des informations et les adresses de nos centres de service aprÚs-vente, appelez ce numéro gratuit
Llame gratis para obtener informaciĂłn para el consumidor y ubicaciones de servicio
GDS18V-221
A
BR
2610052965_GDS18V-221 5/24/19 1:37 PM Page 1
2
ⶠWork area safety
Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
ⶠElectrical safety
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use a Ground Fault Circuit
Interrupter (GFCI) protected supply. Use of
an GFCI reduces the risk of electric shock.
ⶠPersonal safety
Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication. A moment of inattention while
operating power tools may result in serious
personal injury.
Read all safety warnings, instructions, illustrations and speciïŹcations
provided with this power tool. Failure to follow all instructions listed below
may result in electric shock, ïŹre and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term âpower toolâ in the warnings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
General Power Tool Safety Warnings
Safety Symbols
The definitions below describe the level of severity for each signal word. Please read the manual
and pay attention to these symbols.
!
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
2610052965_GDS18V-221 5/24/19 1:37 PM Page 2
3
General Power Tool Safety Warnings
Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
Prevent unintentional starting. Ensure the
switch is in the off-position before
connecting to power source and / or battery
pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or
energizing power tools that have the switch on
invites accidents.
Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power
tool may result in personal injury.
Do not overreach. Keep proper footing and
balance at all times. This enables better
control of the power tool in unexpected
situations.
Dress properly. Do not wear loose clothing
or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in
moving parts.
If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
Do not let familiarity gained from frequent
use of tools allo w you to become
comp lacent and i gnore tool s afety
principles. A careless action can cause
severe injury within a fraction of a second.
ⶠPower tool use and care
Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed.
Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is
dangerous and must be repaired.
Disconnect the plug from the power source
and/or remove the battery pack, if
detachable, from the power tool before
making any adjust ments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power toolâs operation. If
damaged, have the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
Use the power tool, accessories and tool
bits etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from
those intended could result in a hazardous
situation.
Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow
for safe handling and control of the tool in
unexpected situations.
ⶠBattery tool use and care
Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and
fire.
When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws, or other
smal l me ta l objects that can mak e a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
Under abusive conditions, liquid may be
2610052965_GDS18V-221 5/24/19 1:37 PM Page 3
Produktspezifikationen
| Marke: | Bosch |
| Kategorie: | Multifunktionswerkzeug |
| Modell: | GDS18V-221B25 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Bosch GDS18V-221B25 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Multifunktionswerkzeug Bosch
21 Mai 2024
2 MĂ€rz 2024
31 Dezember 2023
20 Juni 2023
20 Juni 2023
20 Juni 2023
20 Juni 2023
17 Juni 2023
10 Juni 2023
10 Mai 2023
Bedienungsanleitung Multifunktionswerkzeug
- Multifunktionswerkzeug Hama
- Multifunktionswerkzeug SilverCrest
- Multifunktionswerkzeug SKS
- Multifunktionswerkzeug Makita
- Multifunktionswerkzeug Parkside
- Multifunktionswerkzeug Vonroc
- Multifunktionswerkzeug AEG
- Multifunktionswerkzeug Taurus
- Multifunktionswerkzeug Powerfix
- Multifunktionswerkzeug Black And Decker
- Multifunktionswerkzeug Cocraft
- Multifunktionswerkzeug FERM
- Multifunktionswerkzeug Ryobi
- Multifunktionswerkzeug Skil
- Multifunktionswerkzeug Topcraft
- Multifunktionswerkzeug Einhell
- Multifunktionswerkzeug Festool
- Multifunktionswerkzeug Worx
- Multifunktionswerkzeug Hikoki
- Multifunktionswerkzeug Metabo
- Multifunktionswerkzeug Stanley
- Multifunktionswerkzeug GĂŒde
- Multifunktionswerkzeug Dremel
- Multifunktionswerkzeug Proxxon
- Multifunktionswerkzeug Dedra
- Multifunktionswerkzeug Leatherman
- Multifunktionswerkzeug Robust
- Multifunktionswerkzeug Baumr-AG
- Multifunktionswerkzeug Bavaria
- Multifunktionswerkzeug Toolcraft
- Multifunktionswerkzeug Fein
- Multifunktionswerkzeug EGO
- Multifunktionswerkzeug Powerplus
- Multifunktionswerkzeug Lezyne
- Multifunktionswerkzeug Victorinox
- Multifunktionswerkzeug Ozito
- Multifunktionswerkzeug Ridgid
- Multifunktionswerkzeug Porter-Cable
- Multifunktionswerkzeug Meister Craft
- Multifunktionswerkzeug MTM
- Multifunktionswerkzeug McKenzie
- Multifunktionswerkzeug Ergotools Pattfield
- Multifunktionswerkzeug Donau Elektronik
Neueste Bedienungsanleitung fĂŒr -Kategorien-
26 Juni 2024
26 Juni 2024
26 Juni 2024
25 Juni 2024
23 Juni 2024
10 Juni 2024
7 Juni 2024
7 Juni 2024
7 Juni 2024
7 Juni 2024