Bolt VS-560 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bolt VS-560 (44 Seiten) in der Kategorie Blitz. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/44
Inspiration strikes
Inspiration strikes
VS-560N
WIRELESS TTL FLASH
User’s Manual
Copyright © 2014 Gradus Group.
Bolt and other names of Bolt products are trademarks of Gradus Group. Other product and corporate names mentioned herein are trademarks of their respective holders.
2 | Introduction
Introduction | 3
Introduction
Thank you for choosing the Bolt VS-560N Wireless TTL Flash. This advanced digital ash unit puts creative
control in your hands with a broad range of automatic and manual features. It can be used as both an on-
camera ash and a wireless slave ash. Among the benets you’ll enjoy:
• Full compatibility with Nikon’s i-TTL system
• Wireless TTL control with multiple ash units and groups
• Automatic and manual zoom from 24mm to 105mm
• Tilt and swivel head: 90° up, 120° right, and 180° left
• 1.8-inch backlit LCD
• Seven manual ash levels: full to 1/64 power
• Autofocus-assist for low-light photography
• High-speed sync
• Rear-curtain sync
• Built-in reector and diffuser panels
• Automatic power-saving function
• Upgradeable rmware
4 | Contents
Contents
Overview ..................................................................................................................................................... 6–9
Warnings .................................................................................................................................................10–12
Installing Batteries ................................................................................................................................... 12–14
Mounting the Flash .................................................................................................................................. 14–16
Turning on the Flash and Firing a Test ............................................................................................................ 16
Extended Interface ......................................................................................................................................... 17
Using the Automatic TTL Flash Mode .......................................................................................................18–19
Using High-Speed Sync ...........................................................................................................................19–20
Locking Flash Exposure ...........................................................................................................................20–21
Using Flash Exposure Compensation .............................................................................................................. 21
Using the Manual Flash Mode .................................................................................................................. 22–23
Controlling Flash Coverage (Zoom) ..........................................................................................................23–26
Contents | 5
Using the Autofocus-Assist Light .................................................................................................................... 26
Bouncing Your Flash................................................................................................................................. 27–29
Using Rear- or Second-Curtain Synchronization ....................................................................................... 29–30
Using Your VS-560N as a Wireless TTL Slave ............................................................................................ 31–33
Using Your VS-560N as a Wireless Manual Flash ...................................................................................... 33–35
Positioning Remote Flash Units ................................................................................................................ 36–37
Upgrading the Firmware on the VS-560N ....................................................................................................... 38
Troubleshooting ....................................................................................................................................... 38–39
Specications .......................................................................................................................................... 40–41
Guide Number Chart ...................................................................................................................................... 41
FCC Notices ................................................................................................................................................... 42
One-Year Limited Warranty ............................................................................................................................. 43
45
60
75
1
2
4
17
19
18
8
16
12
3
5
20
6
7
9
11
15
14
10
13
VS-560N
6 | Overview
Overview | 7
Overview
1. Flash head
2. Reector panel
3. Diffuser panel
4. Battery compartment cover
5. Wireless sensor (optical)
6. Mounting foot
7. Mounting foot lock
8. Mode button
9. Up button
10. Down button
11. Zoom position button
12. Ready light / Test button
13. Power switch
14. Automatic exposure
conrmation light
15. Flash head position indicator
16. LCD
17. External power socket
18. PC sync socket
19. Firmware upgrade socket
20. AF assist/Wireless ready
indicator light
8 | Overview
GROUP BGROUP A GROUP C
TTL
EV+
MS
EV-
27 28 29 30
21 22 23 24 25
26 31
Overview | 9
21. Slave mode
22. TTL mode
23. Wireless TTL mode
24. Manual mode
25. Manual ash output / Slave channel
26. Slave group
27. Zoom mode
28. Zoom position
29. Flash compensation value
30. Camera aperture (f-stop)
31. Stand / Tripod mount
10 | Warnings
Warnings
Before using your VS-560N, please read the following safety notices carefully and thoroughly to ensure safe
use, and to help prevent damage to your ash or injury to yourself or others.
• Do not re the ash at close range directly into the eyes of people or animals. This can cause damage to
the retina and may even lead to blindness.
• To avoid overheating and damaging your ash unit, please wait for at least 10 minutes after 20 continuous
ashes at full power.
• Do not disassemble or attempt to repair this product yourself. There are high-voltage components inside
that can produce a hazardous electric shock.
• Keep this product and its batteries out of reach of children.
• Use only the power sources specied in this manual.
• Always switch the ash off before changing the batteries.
• Always install AA batteries of the same type, brand, and age. Do not combine different types or brands, or
old and new batteries. This could cause batteries to leak, overheat, or explode.
Warnings | 11
• Install batteries in the proper orientation, according to the indicator in the battery chamber. Installing
batteries in the reverse orientation could cause them to leak, overheat, or explode.
• Do not use or store the VS-560N in ammable conditions (such as environments containing ammable
gases or liquid chemicals). This could damage the ash, start a re, or cause an electric shock.
• Do not clean the VS-560N with agents containing corrosive or ammable substances such as paint thinner,
benzene, or nail polish remover.
• This product is not water resistant. Keep it away from rain, snow, humidity, and general moisture.
• Should the VS-560N get damaged, do not touch any exposed interior metal parts. If touched, they may
generate an electric shock or cause a malfunction. Promptly remove the batteries and take the product to
an authorized service center for repair.
• If you detect excessive heat, smoke, or a burning smell coming from the ash, immediately stop operation
and remove the batteries to prevent the product from igniting or melting. Take the product to an authorized
service center for repair.
• Do not drop or otherwise cause a strong physical impact to the VS-560N, as this could cause a malfunction
that may cause it to explode or ignite.
• Remove all batteries from the VS-560N before long-term storage in order to prevent the product from
igniting or leaking corrosive liquids.
12 | Installing Batteries
• Do not store or use this product at temperatures above 104°F (40°C).
• Keep the metal contacts in the battery compartment clean and free of corrosion and dirt. Do not touch
them with your ngers. Corrosive elements on the contacts can damage the VS-560N and prevent it from
functioning properly. Contacts may be cleaned with isopropyl alcohol on a cotton swab.
• Dispose of used batteries properly. Never heat them or throw them into a re, as this could cause the
batteries to leak corrosive liquids, generate heat, or explode.
Installing Batteries
The VS-560N can be powered by four AA batteries of several types:
• Lithium (1.5V)
• Nickel-metal hydride (Ni-MH) (1.2V)
• Alkaline (1.5V)
Note: For the fastest recycle times and longest battery life, lithium or Ni-MH batteries are recommended.
Installing Batteries | 13
To install batteries, make sure the VS-560N is turned off and follow these steps:
1. Press on the battery compartment cover and slide it in the direction of the arrow to remove it.
2. Insert batteries in the orientations indicated by the illustration inside the compartment.
3. Replace the battery compartment cover by pressing and sliding it into place in the opposite direction of
the arrow on the cover.
1 2 3
14 | Mounting the Flash
Important!
Replace all four batteries at the same time. Do not mix battery types or brands, or use old and new batteries
together.
Mounting the Flash
To mount the ash on your camera,
make sure the VS-560N is turned off
and follow these steps:
1. Turn the mounting foot lock counter-clockwise to loosen it.
LOCK
75
1
Mounting the Flash | 15
2. Slide the mounting
foot all the way into
your camera’s hot
shoe.
3. Turn the mounting
foot lock clockwise
until snug. Do not
overtighten.
To dismount the ash from your camera, make sure the
VS-560N is turned off and follow these steps:
1. Turn the mounting foot lock counter-clockwise to loosen it.
2. Slide the mounting foot out of your camera’s hot shoe.
LOCK
75
LOCK
LOCK
2 3
Produktspezifikationen
| Marke: | Bolt |
| Kategorie: | Blitz |
| Modell: | VS-560 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Bolt VS-560 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Blitz Bolt
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
Bedienungsanleitung Blitz
- Blitz LogiLink
- Blitz Sony
- Blitz Panasonic
- Blitz Canon
- Blitz Braun
- Blitz Metz
- Blitz Olympus
- Blitz Genaray
- Blitz Cullmann
- Blitz Fujifilm
- Blitz MINOX
- Blitz Nikon
- Blitz Sigma
- Blitz Yongnuo
- Blitz Konica-Minolta
- Blitz Leica
- Blitz Pentax
- Blitz Rollei
- Blitz SeaLife
- Blitz Pulsar
- Blitz Manfrotto
- Blitz EasyMaxx
- Blitz Godox
- Blitz GVM
- Blitz Hähnel
- Blitz Dörr
- Blitz Ikan
- Blitz Kenko
- Blitz Neewer
- Blitz Nissin
- Blitz Quantum
- Blitz Sunpak
- Blitz Triopo
- Blitz Vivitar
- Blitz Elinchrom
- Blitz Profoto
- Blitz Vello
- Blitz Aputure
- Blitz Westcott
- Blitz Xantech
- Blitz Anton/Bauer
- Blitz PolarPro
- Blitz Lastolite
- Blitz ANDYCINE
- Blitz Ikelite
- Blitz COLBOR
- Blitz Goodram
- Blitz Xit
- Blitz Impact
- Blitz Rotolight
- Blitz Cactus
- Blitz Kaiser Fototechnik
- Blitz FoxFury
- Blitz Jinbei
- Blitz Quadralite
Neueste Bedienungsanleitung für -Kategorien-
8 Oktober 2024
7 Oktober 2024
3 Oktober 2024
1 Oktober 2024
1 Oktober 2024
29 September 2024
19 September 2024
16 September 2024
15 September 2024
8 September 2024