Bolt VM-1020 Bedienungsanleitung
Bolt
Remote trigger
VM-1020
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bolt VM-1020 (36 Seiten) in der Kategorie Remote trigger. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/36
VM-1000
TTL MACRO FLASH SET
User Manual
2 | Introduction
Thank you for choosing Bolt.
The Bolt VM-1000 is a full-featured wireless macro
flash for your Nikon, Canon, or Sony camera. This
advanced digital flash system puts creative control
in your hands with a broad range of automatic and
manual features. It can be used to illuminate close-up
subjects with multi-flash setups and flexible wireless
communication.
Enjoy automatic TTL settings with the ability to use
up to three groups and sixteen channels without
interference. Change auto flash compensation values
or set flash power manually. With the included Macro
Flash Ring, you can use up to four VM-1010 flash units.
You’ll be able to experiment with light and customize
lighting settings to illuminate close-up subjects.
Table of Contents
Precautions 3 ..........................................................
Contents 5 ...............................................................
Overview 6 ..............................................................
Battery Installation 12 .............................................
Transceiver and Flash Setup 14 ..............................
VM-1010 Flash Settings and Controls 20 ................
VM-1020 Transceiver Settings and Controls 22 ......
Specifications 32 .....................................................
Troubleshooting 34 .................................................
Firmware Upgrade 35 .............................................
FCC Compliance 35 .................................................
Precautions | 3
Precautions
⚠ ⚡
• Before using this product, please thoroughly read the
following safety notices to ensure safe use and help
prevent damage to your flash or injury to yourself and
others.
• Do not fire the flash at close range directly into the eyes
of people or animals. This can cause damage to the
retina and may even lead to blindness.
• To avoid overheating and damaging your flash unit,
please wait for at least ten minutes after twenty-five
continuous flashes at full power.
• Do not disassemble or attempt to repair this product
yourself. There are high-voltage components inside that
can produce a hazardous electric shock.
• Keep this product and its batteries out of the reach of
children.
• Use only the power sources specified in this manual.
• Always switch the flash o before changing the batteries.
• Always install batteries of the same type, brand, and
age. Do not combine dierent types or brands, or old
and new batteries. This can cause the batteries to leak,
overheat, or explode. Install the batteries in the proper
orientation, according to the indicator in the battery
chamber. Installing batteries in the reverse orientation
may cause them to leak, overheat, or explode.
• Do not clean this product with agents containing
corrosive or flammable substances such as paint thinner,
benzene, or nail-polish remover.
Produktspezifikationen
| Marke: | Bolt |
| Kategorie: | Remote trigger |
| Modell: | VM-1020 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Bolt VM-1020 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Remote trigger Bolt
4 September 2024
4 September 2024
4 September 2024
Bedienungsanleitung Remote trigger
- Remote trigger Sony
- Remote trigger Fujifilm
- Remote trigger Yongnuo
- Remote trigger Leica
- Remote trigger Nissin
- Remote trigger Profoto
- Remote trigger Vello
- Remote trigger DSC
- Remote trigger Impact
- Remote trigger Broncolor
- Remote trigger Cactus
- Remote trigger Hensel
Neueste Bedienungsanleitung für -Kategorien-
14 September 2024
9 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024