Bogen NQ-GAXMR1 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bogen NQ-GAXMR1 (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
Specications are subject to change.
© Copyright 2022, Bogen Communications LLC
740-00173A 220318
NQ-GAXMR1 Audio Distribution Transformer
Installation and Use Guide
2
NQ-GAXMR1
WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
Avertissement: pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité.
The apparatus shall not be exposed to dripping or splashing and that no objects lled with liquids, such as vases, shall be placed on appara-
tus.
L’appareil ne doit pas être expoaux écoulements ou aux éclaboussures et aucun objet ne contenant de liquide, tel qu’un vase, ne doit être placé sur
l’objet.
The mains plug is used as disconnect device. The mains plug of apparatus should not be obstructed OR should be easily accessed during
intended use. To be completely disconnect the power input, the mains plug of apparatus shall be disconnected from the mains.
La prise du secteur est utilisé pour déconnecter le système. La prise du secteur ne doit pas être obstre ou doit être facilement accessible pendant son
utilisation. Pour être complètement déconnecté de l’alimentation d’entrée, la prise doit être débranchée du secteur.
CAUTION: DO NOT INSTALL OR PLACE THIS UNIT IN A BOOK CASE, BUILT-IN CABINET, OR IN ANOTHER CONFINED SPACE.
ENSURE THAT THE UNIT IS WELL VENTILATED. TO PREVENT THE RISK OF SHOCK OR FIRE HAZARD DUE TO OVER HEATING.
ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
Always comply with the following basic safety precautions when
installing and using the unit:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. DO NOT use this apparatus near water.
6. Clean only with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. DO NOT install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that
produce heat.
9. Operating temperature range of 0 °C to 40 °C.
10. For indoor use only.
11. Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally,
or has been dropped.
This equipment is not suitable for use in locations where children
are likely to be present. Equipment is intended for use only in a
restricted access area.
Minimum distance of 10 cm around the apparatus for sucient
ventilation.
- 10cm distance minimale autour de l’appareil pour une aération suff-
isante
The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, table-cloths, curtains, etc.
- il convient que l’aération ne soit pas gênée par ’obstruction des ouver-
tures dra
No naked ame sources, such as lighted candles, should be placed
on the apparatus.
- il convient de ne pas placer sur l’appareil de sources de flammes nues,
telles que des bougies allumées
Only use the apparatus in moderate climates.
- si l’appareil est destiné à être utilisé sous un climat tempéré.
3
NQ-GAXMR1
The NQ-GAXMR1 Distributed Transformer provides impedance and voltage matching to allow a direct-drive (4- or
8-ohm) Power Amplier to drive a high-impedance distributed loudspeaker system at up to 40W using outputs of
either 25V or 70V. Note that only one output voltage can be used at a time.
The NQ-GAXMR1 allows ampliers without direct 25V or 70V output capability to drive distributed loudspeaker sys-
tems designed to operate at those voltages.
Output Connections
To drive distributed speaker systems designed to operate at
25V or 70V, connect your distributed loudspeaker system to
the output of the NQ-GAXMR1 transformer module. Connect
output wiring using the Phoenix input. Maintain proper polar-
ity (+/COM) on output connector. 25V or 70V can be selected,
depending on the distributed system. The NQ-GAXMR1 is
rated at a maximum of 40W RMS at 25V or 70V.
Input Connections
Connect your power amplier output to the NQ-GAXMR1
transformer input using the Phoenix connector, observing
proper polarity (+/COM) on input connector.
Use of a high-pass lter (aka a ) set at a minimum low-cut lter
of 50 Hz is necessary when using the NQ-GAXMR1 trans-
former module to drive a 25V or 70V distributed loudspeaker
system to prevent distortion due to transformer saturation.
The input and output wirings are shown in Figure 1.
Specications
Power Rating: Maximum 40W
Input Voltage: 17.9 Vrms max.
Input Current: 2.24 Arms max.
Output Tap 1 Voltage: 70.7 Vrms
Output Tap 1 Current: 566 mArms
Output Tap 2 Voltage: 25 Vrms
Output Tap 2 Current: 625 mArms
FrequencyResponse: 50to15kHz+0/−3dB
THD: 0.02% 10W 50–20kHz
Size: 2.559” x 4.810” x 2.5”
Weight: 2.2 lbs
OUTPUT
COM 70V25V
INPUT
COM +
Figure 1


Produktspezifikationen

Marke: Bogen
Kategorie: Nicht kategorisiert
Modell: NQ-GAXMR1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Bogen NQ-GAXMR1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Bogen

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-