Blustream UEX100E-KIT Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Blustream UEX100E-KIT (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
UEX100E-KIT QUICK REFERENCE GUIDE
Contact: support@blustream.com.au | support@blustream-us.com support@blustream.co.uk|
UEX100E-KIT
Quick Reference Guide
01
The UEX100E-KIT is a USB extender kit utilising HDBaseTâ„¢ technology to extend
USB 2.0, 2CH analogue audio and control signals up to 100m over a single CAT
cable. The UEX100E-KIT allows up to 4 USB devices to be connected to a single
USB host with support for a transmittion data bandwidth up to 480Mbps and is
backwards compatible with USB 1.1 devices. The UEX100E-KIT also provides bi-
directional Power over Cable (PoC), bi-directional IR and RS-232 and 2CH analogue
and Ethernet pass through.
Introduction
FEATURES:
• Extends USB up to a distance of 100m over a single CAT cable using HDBaseT™ Technology
• Supports USB 2.0 signal extension
• Backwards compatible with USB 1.1 devices
• Transmitted data bandwidth up to 480Mbps
• 1x USB-B on Transmitter for connection to host device
• 4x USB-A hub on Receiver for connection to devices
• USB-A ports 1-2 support 5V1A, USB-A ports 3-4 support 5V500mA
• Bi-directional Ethernet pass through (100Mbps)
• Bi-directional IR & RS-232 pass through
• Supports 2CH PCM Analogue Audio pass through (direction selectable)
• Bi-directional PoC (Power over Cable) to power extenders from either transmitter or receiverend
• Simple plug and play, no driver installation or setup required.
*Signal distribution length subject to length of device and host USB cables and CAT cable type
CONFIGUSB HOST RS-232
1
0
TX RX
24V 1.25AETHERNET HDBT IN IR IN IR OUT L/R
AUDIO
IN OUT
500mA CONFIG RS-2321A
1234
1
0
TX RX
24V 1.25AETHERNET HDBT OUT IR IN IR OUT L/R
AUDIO
IN OUT
UEX100E-KIT QUICK REFERENCE GUIDE
www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk02
TX Panel Descriptions
1 Ethernet Port - RJ45 connector. Connect to local
network switch
2 HDBaseTâ„¢ Output - RJ45 connector
3 IR Input - Connect to Blustream 5V 3.5mm IR receiver
4 IR Output - Connect to Blustream 5V 3.5mm IR emitter
5 Analogue Audio L/R - 3.5mm stereo jack can be used
as input or output from UEX100E-RX
6 Analogue Audio In/Out Switch - Select if audio is sent
to or received from UEX100E-RX
7 24V DC 1.25A 4-pin power supply connector
8 LED Power Indicator
9 1A USB Device Connection - USB A connection to
connect to high current (up to 1A) USB devices*
q 500mA USB Device Connection - USB A connection to
connect to USB devices up to 500mA*
w Config DIP Switch - DIP 1 sets PoC on or o. DIP 2 sets
RS232 passthrough or update mode
e RS-232 Port - 3-Pin Phoenix connector to pass bi-
directional IR to / from the receiver
*Note: only one USB camera can be connected at a time
1 Ethernet Port - RJ45 connector. Connect to local
ethernet port of network device
2 HDBaseTâ„¢ Input - RJ45 connector
3 IR Input - Connect to Blustream 5V 3.5mm IR receiver
4 IR Output - Connect to Blustream 5V 3.5mm IR emitter
5 Analogue Audio L/R - 3.5mm stereo jack can be used
as input or output from UEX100E-RX
6 Analogue Audio In/Out Switch - Select if audio is sent
to or received from UEX100E-TX
7 24V DC 1.25A 4-pin power supply connector
8 LED Power Indicator
9 USB Host Connection - USB B connection to connect
to PC
q Config DIP Switch - DIP 1 sets PoC on or o. DIP 2 sets
RS232 passthrough or update mode
w RS-232 Port - 3-Pin Phoenix connector to pass bi-
directional IR to / from the receiver
4
RX Panel Descriptions
21 53
Device Cabling
It is important that the interconnecting CAT cable between the Transmitter and Receiver is terminated using the
correct RJ45 pin configuration. The CAT cable MUST be a ‘straight’ (pin-to-pin) CAT cable.
Please ensure that the USB cabling used with this product is within specifications for both the distance and maximum
/ expected data rate transfer of the equipment in use. Exceeding distances, or using cabling not suitable for the data
transfer, may stop the UEX100E-KIT from working properly.
It is recommended to keep the USB cabling either side of the UEX100E-KIT to a minimum, using the range of the
equipment to run the distance over the CAT cable infrastructure.
24V 1.25AETHERNET HDBT OUT IR IN IR OUT L/R
AUDIO
IN OUT
24V 1.25AETHERNET HDBT IN IR IN IR OUT L/R
AUDIO
IN OUT
500mA CONFIG RS-2321A
1234
1
0
TX RX
6 7 9 10 11 12
CONFIGUSB HOST RS-232
1
0
TX RX
421 53 6 7 9 10 11
8
8
UEX100E-KIT QUICK REFERENCE GUIDE
www.blustream.com.au | www.blustream-us.com www.blustream.co.uk|
Specifications
NOTE: Specifications are subject to change without notice. Weights and
dimensions are approximate.
UEX100E-TX
• CAT Connectors: 1 x RJ45 connector
• USB Port: 4 x USB Type-A
• Audio Input/Output Port: 1 x Analogue Audio L/R
(3.5mm stereo jack)
• Ethernet Port: 1 x RJ45 Connector
• RS-232 Port: 1 x 3-pin Phoenix connector
• IR Input Port: 1 x 3.5mm stereo jack
• IR Output Port: 1 x 3.5mm mono jack
• Control Switch: 2-pin DIP switch
• Casing Dimensions (W x D x H): 150 x 100 x 25mm
• Power Supply: 24V/1.25A DC, 4-pin connector
UEX100E-KIT
• Box Dimensions (W x D x H): 190 x 160 x 130mm
• Shipping Weight: 1.6kg
• Operating Temperature: 32°F to 104°F (-5°C to +55°C)
• Storage Temperature: -4°F to 140°F (-25°C to +70°C)
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION - changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
CANADA, INDUSTRY CANADA (IC) NOTICES
This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device,
please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally
safe recycling.
Certifications
04
UEX100E-RX
• CAT Connectors: 1 x RJ45 connector
• USB Port: 1 x USB Type-B
• Audio Input/Output Port: 1 x Analogue Audio L/R
(3.5mm stereo jack)
• Ethernet Port: 1 x RJ45 Connector
• RS-232 Port: 1 x 3-pin Phoenix connector
• IR Input Port: 1 x 3.5mm stereo jack
• IR Output Port: 1 x 3.5mm mono jack
• Control Switch: 2-pin DIP switch
• Casing Dimensions (W x D x H): 150 x 100 x 25mm
• Power Supply: 24V/1.25A DC, 4-pin connector
Package Contents
• 1 x UEX100E-TX Transmitter
• 1 x UEX100E-RX Receiver
• 1 x 24V/1.25A DC Power Supply
• 1 x USB A to B cable (1m)
• 2 x Mounting Bracket Sets
• 1 x Quick Reference Guide


Produktspezifikationen

Marke: Blustream
Kategorie: Nicht kategorisiert
Modell: UEX100E-KIT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Blustream UEX100E-KIT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Blustream

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-