Blustream DA22XLR-WP Bedienungsanleitung

Blustream Audio/Video-Konverter DA22XLR-WP

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Blustream DA22XLR-WP (4 Seiten) in der Kategorie Audio/Video-Konverter. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

DA22XLR-WP QUICK REFERENCE GUIDE

Contact: support@blustream.com.au support@blustream-us.com | | support@blustream.co.uk

The DA22XLR-WP is a multi-input / output wall plate to convert analogue audio

within a digital Dante® networked audio system. The DA22XLR-WP features 2 input

channels of balanced / unbalanced / MIC audio with switchable 48V phantom

power and 2 output channels of balanced / unbalanced audio.

The DA22XLR-WP is a plug & play device that is powered using PoE (Power over

Ethernet), or via 12V power supply, oers support for AES67 RTP audio transport

and magnetic faceplate design allows for both UK & EU backbox compatibility. The

DA22XLR-WP is the ideal BYOD interface to a Dante® audio system.

Introduction

DA22XLR-WP

Quick Reference Guide

• Dante® network wall plate interface for 2 x audio inputs and 2 x audio outputs

• Converts 2 x balanced / unbalanced / MIC audio sources to Dante® audio channels

• Converts 2 x Dante® audio channels to balanced / unbalanced audio outputs

• Switchable 48V Phantom power for each MIC XLR input

• Adjustable MIC / line sensitivity from +24dBu to -28dBV for each XLR input

• Adjustable line gain from +18 dBu to -10 dBV for each XLR output

• Supports: 44.1, 48 & 96kHz sample rates @ 24 Bit

• Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)

• Supports AES67 RTP audio transport

• Features Class 0 IEEE 802.3af PoE for powering of product from any PoE switch

• Supports power via 12V DC adapter (supplied) for when network switch does not support PoE

• Magnetic faceplate surround allowing for both UK & EU backbox compatibility

FEATURES:

DA22XLR-WP QUICK REFERENCE GUIDE

02 www.blustream.com.au | www.blustream-us.com www.blustream.co.uk|

Connections:

1 Analogue Audio Input - XLR connector for balanced or

unbalanced analogue audio input

2 Input Sensitivity Dial - Rotate to adjust the input sensitivity of the

analogue audio input connections

3 Analogue Audio Output - XLR connector for balanced or

unbalanced analogue audio output

4 Output Gain Dial - Rotate to adjust the output gain of the

analogue audio output connections

5 48V Phantom Power Switch - Press to enable/disable 48V

phantom power for microphones on corresponding input,

illuminates when 48V is enabled

6 Power Status Indicator - Illuminates when the device is powered

on power input

7 ID LED Indicator - Flashes when this device is identified through

Dante Configurator®

8 Micro USB Port - Used for firmware updates

Front Panel

Rear Panel

Connections:

1 Dante® Network Connection (PoE) - RJ45 connection to connect

to network switch

2 Power Port – Use 12V/1A DC adaptor (not included) when PoE is

not available to power device

Input Senstivity / Output Gain

The DA22XLR-WP features rotary dials that allow for the

adjustment of both the input sensitivity and output gain of each

of the analogue channels.

Simply rotate the dial and align the arrow to one of the 5

switch positions. The input sensitivity or output gain level will

correspond to the position as per the table adjacent (also

printed under the faceplate of the device itself).

Please note: Due to the low input signal from microphones, when using a microphone we recommend only using

switch positions 3-5 to avoid clipping of the input signal.

DIP INPUT

SENSITIVITY

LINE INPUT

VRMS

OUTPUT

GAIN

OUTPUT

VRMS

1 +24dBu 12.28 +18dBu 6.153

2 +4dBu 1.228 +4dBu 1.228

3 0dBu 0.775 0dBu 0.775

4 -10dBV 0.316 0dBV 1

5 -28dBV 0.04 -10dBV 0.316

2 3 4

6 7 8

DA22XLR-WP QUICK REFERENCE GUIDE

Contact: support@blustream.com.au support@blustream-us.com | | support@blustream.co.uk

Dante® Controller soware is required in order to set

up and configure the DA22XLR-WP as well as control

the Dante network. Audinate provide extensive ®

training videos and documentation on their website.

This can be found here: http://www.audinate.com/

products/soware/dante-controller

Upon connecting the DA22XLR-WP to a compatible

network, the Dante Controller soware will ®

automatically discover the device. The DA22XLR-WP

will appear in the Dante Controller with a name ®

prefixed as “DA22XLR-WP”. On the “Routing” screen,

audio can can be routed between Dante transmitters ®

and receivers in the system.

Please ensure the PC is on the same network as the

Dante® ® devices. Dante is not able to transmit over

WiFi, and it is recommended to hardwire into the

Dante® network. Having multiple network devices

enabled can also confuse the Dante Controller ®

soware so it is recommended to disable WiFi during

configuration.

Dante® Controller

RevA4_QRG_DA22XLR-WP

Advanced Dante Settings®

It is also possible to change the settings of the

DA22XLR-WP within the “Device Info” screen in the

Dante® Controller soware. To do so, select the

“Device Config” menu.

The sample rate of the DA22XLR-WP can be

adjusted here. Please note: Dante products can ®

only transmit or receive audio from other Dante®

products that are set up with the same sample rate.

A mismatch in sample rate may stop audio from

transmitting.

Under the “Device Config” screen, the latency of

the DA22XLR-WP can be adjusted from 1, 2 or 5

milliseconds.

By default the DA22XLR-WP is shipped with its

network settings set to obtain an IP address

automatically. This means that if a DHCP server is

present on the network, it will provide the DA22XLR-

WP with an IP address. If no DHCP server is present

then the DA22XLR-WP will receive a default IP

address in the 169.254.xxx.xxx range.

To change the IP address of the DA22XLR-WP, enter

the “Network Config” menu in the “Device Info”

screen of the Dante Controller soware.®

Produktspezifikationen

Marke:	Blustream
Kategorie:	Audio/Video-Konverter
Modell:	DA22XLR-WP
Produktfarbe:	Grau
Betriebstemperatur:	0 - 40 °C
Paketgewicht:	600 g
Verpackungsart:	Box
Temperaturbereich bei Lagerung:	-20 - 60 °C
Anzahl:	1
USB-Stecker:	Mikro-USB
Anzahl USB 1.1 Anschlüsse:	1