Blizzard Hypno Beam Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Blizzard Hypno Beam (24 Seiten) in der Kategorie Effect machine. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
Blizzard Lighting, LLC
http://www.blizzardpro.com
Waukesha, WI USA
Copyright (c) 2019
Page 2
Hypno™ Beam Manual Rev. B © 2019 Blizzard Lighting, LLC
TABLE OF CONTENTS
Hypnoâ„¢ Beam Moving Head 1
1. Getting Started 3
What’s In The Box? 3
Getting It Out Of The Box 3
Powering Up! 3
Getting A Hold Of Us 3
Safety Instructions (Don’t Stick Your Hand In The Toaster!) 4
2. Meet The Hypnoâ„¢ Beam 5
Main Features 5
DMX Quick Reference 5
The Hypnoâ„¢ Beam Pin-up Picture 6
3. Setup 7
Fuse Replacement 7
Connecting A Bunch Of Hypnoâ„¢ Beam Fixtures 7
Data/DMX Cables 7
Cable Connectors 8
3-Pin??? 5-Pin??? Huh? 8
Take It To The Next Level: Setting up DMX Control 8
Fixture Linking (Master/Slave Mode) 9
Mounting/Rigging 9
Mounting Points 10
Clamp Mounting 11
4. Operating Adjustments 12
The Control Panel 12
Control Panel Menu Structure 13
DMX Mode 14
Select The Channel Mode 14
Select The DMX Starting Address 14
Master/Slave Mode Settings 14
Auto, Stand-Alone, Sound Active Modes 14
Auto Mode 14
Sound Active Mode 14
Pan Inverse 15
Tilt Inverse 15
Pan Angle Setting 15
No DMX / Lost Signal Setting 15
DMX Channel Values In-Depth 16
Troubleshooting 17
5. Appendix 18
A Quick DMX Lesson 18
Keeping Your Hypnoâ„¢ Beam As Good As New 19
Returns (Gasp!) 19
Shipping Issues 19
Tech Specs 20
Dimensional Drawings 21
Colors and Gobos 22
Photometric Data 22
Page 3
Hypno™ Beam Manual Rev. B © 2019 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
• 1 x Hypno™ Beam Fixture
• An Ever-So-Handy Power Cord
• A Sweet Mounting Bracket
• This Lovely User Manual
Getting It Out Of The Box
Congratulations on purchasing the Hypnoâ„¢ Beam moving head. You're all set to deliver a
stunning lighting experience of psychedelic proportions! Now that you’ve got your Hypno™
Beam, you should carefully unpack the box and check the contents to ensure that all parts
are present and in good condition. If anything looks as if it has been damaged in transit,
notify the shipper immediately and keep the packing material for inspection. Again, please
save the carton and all packing materials. If a îš¿xture must be returned to the factory, it is
important that the îš¿xture be returned in the original factory box and packing.
Powering Up!
All xtures must be powered directly o a switched circuit and cannot be run o a
rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer
channel is used solely for a 0% to 100% switch.
AC Voltage Switch - Not all îš¿xtures have a voltage select switch, so please verify that the
îš¿xture you receive is suitable for your local power supply. See the label on the îš¿xture or
refer to the xture’s specications chart for more information. A xture’s listed current
rating is its average current draw under normal conditions. Check the îš¿xture or device
carefully to make sure that if a voltage selection switch exists that it is set to the correct
line voltage you will use.
Warning! Verify that the voltage select switch on your unit matches the line
voltage applied. Damage to your îš¿xture may result if the line voltage applied does
not match the voltage indicated on the voltage selector switch. All îš¿xtures must
be connected to circuits with a suitable Ground (Earthing).
DISCLAIMER:
The power connector îš¿tted to the îš¿xture and îš¿xture cord are designed for compatibility with
products manufactured by Neutrik AG, Neutrik USA and their related entities, however they are
not manufactured by, aliated with or endorsed by Neutrik AG, Neutrik USA, or any related entity.
Neutrik® and powerCON® are registered trademarks of Neutrik AG.
Getting A Hold Of Us
If something happens goes wrong, please visit www.blizzardpro.com/support and open a
support ticket. We’ll be happy to help, honest.
*The information and speciîš¿cations contained in this document are subject to change
without notice. Blizzard Lightingâ„¢ assumes no responsibility or liability for any errors
or omissions that may appear in this user manual. Blizzard Lightingâ„¢ reserves the right
to update the existing document or to create a new document to correct any errors or
omissions at any time. You can download the latest version of this document from www.
blizzardpro.com.
Author: Date: Last Edited: Date:
J. Thomas 8/9/2017 J. Thomas 5/7/2019

Produktspezifikationen

Marke: Blizzard
Kategorie: Effect machine
Modell: Hypno Beam

Brauchst du Hilfe?

Wenn Sie Hilfe mit Blizzard Hypno Beam benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Effect machine Blizzard

Bedienungsanleitung Effect machine

Neueste Bedienungsanleitung für -Kategorien-