Blade Inductrix Switch Bedienungsanleitung

Blade ferngesteuertes Spielzeug Inductrix Switch

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Blade Inductrix Switch (15 Seiten) in der Kategorie ferngesteuertes Spielzeug. Dieser Bedienungsanleitung war für 36 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/15
RTF
READY-TO-FLY
Instruction Manual
Bedienungsanleitung
Manuel d’utilisation
Manuale di Istruzioni
I
n
s
t
r
u
c
t
i
o
M
a
n
u
l
l
Bedienun
g
sanleitun
g
2
EN
WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before
operating. Failure to operate the product correctly can result in damage to the product, personal property and
cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic
mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage
to the product or other property. This product is not intended for use by children without direct adult supervision. Do
not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon
Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow
all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid
damage or serious injury.
The following terms are used throughout the product literature to indicate various levels of potential harm when
operating this product:
WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage,
and serious injury OR create a high probability of superfi cial injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a
possibility of serious injury.
NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no
possibility of injury.
Always keep a safe distance in all directions around
your model to avoid collisions or injury. This model is
controlled by a radio signal subject to interference from
many sources outside your control. Interference can
cause momentary loss of control.
Always operate your model in open spaces away from
full-size vehicles, traf c and people.
Always carefully follow the directions and warnings for
this and any optional support equipment
(chargers, rechargeable battery packs, etc.).
Always keep all chemicals, small parts and anything
electrical out of the reach of children.
Always avoid water exposure to all equipment not
specifi cally designed and protected for this purpose.
Moisture causes damage to electronics.
Never place any portion of the model in your mouth as it
could cause serious injury or even death.
Never operate your model with low transmitter
batteries.
Always keep aircraft in sight and under control.
Always move the throttle fully down at rotor strike.
Always use fully charged batteries.
Always keep transmitter powered on while aircraft is
powered.
Always remove batteries before disassembly
Always keep moving parts clean.
Always keep parts dry.
Always let parts cool after use before touching.
Always remove batteries after use.
Never operate aircraft with damaged wiring.
Never touch moving parts.
NOTICE
All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon
Hobby, LLC. For up-to-date product literature, visit horizonhobby.com and click on the support tab for this product.
Meaning of Special Language
Safety Precautions and Warnings
Age Recommendation: Not for children under 14 years. This is not a toy.
3EN
Box Contents
Components
Specifi cations
Table of Contents
Length 4.69 in (119mm)
Height 2.36 in (60mm)
Width 4.29 in (109mm)
Propeller Diameter 1.81 in (30mm)
Flying Weight .77 oz (22 g)
To register your product online,visit www.bladehelis.com
Components ....................................................................3
Specifi cations ..................................................................3
Box Contents ...................................................................3
First Flight Preparation .....................................................4
Flying Checklist ...............................................................4
Charging Warnings...........................................................4
Battery Charging ..............................................................4
Installing the Transmitter Batteries ...................................5
Installing the Flight/Drive Battery .....................................5
Transmitter and Receiver Binding .....................................6
SAFE Technology .............................................................6
LED Codes .......................................................................7
Transmitter Control ..........................................................7
Understanding the Primary Flight Controls .......................8
Flying the Switch™ Quadcopter ......................................9
Switching from Quadcopter Operation to
Hovercraft Operation ........................................................9
Post-Flight Inspection and Maintenance Checklist ..........10
Troubleshooting Guide ...................................................11
Exploded View ...............................................................12
Replacement Parts .........................................................12
Optional Parts ................................................................12
Limited Warranty ...........................................................13
Warranty and Service Contact Information .....................14
FCC Information .............................................................14
IC Information ...............................................................14
Compliance Information for the European Union .............14
BLH9800
Airframe – Blade ® Inductrix® Switch (BLH9800) Included
Motors – 6mm Brushed, (BLH8502, CW), (BLH8503, CCW) Installed
On-board Electronics – Main control board, SAFE® (BLH9802) Installed
Battery – 150mAh 1S 3.7V 25C Li-Po (EFLB1501S25) Included
Charger – 1S USB Li-Po Charger, 3.7V (EFLC1008) Included
Transmitter – MLP4DSM 2.4 GHz, 4 CH Transmitter, BCMX2 (EFLH1064B) Included
• Blade® Inductrix® Switch
• 3.7V 25C 150mAh 1S Li-Po Battery
• 1S USB Li-Po Charger
• MLP4DSM Transmitter
• 4 AA Batteries


Produktspezifikationen

Marke: Blade
Kategorie: ferngesteuertes Spielzeug
Modell: Inductrix Switch
Integrierte Kamera: Nein
Gewicht: 38 g
Ladegerät: Ja
Produkttyp: Quadrocopter
Typ: Quadrocopter
Menge pro Packung: 1 Stück(e)
Gehäusematerial: Kunststoff
Anzahl Kanäle: 4 Kanäle
Anzahl: 1
Anzahl unterstützter Akkus/Batterien: 1
Frequenzband: 2.4 GHz
Motortyp: Elektromotor
Länge (mm): 119 mm
Akkus/Batterien enthalten: Ja
Bauart: Flugbereit (RTF)
Lichteffekte: Ja
Transmitter: Ja
Anzahl der Rotoren: 4 Rotoren
Nachbildung: Nein
Länge Hauptrotorblatt: 30 mm

Brauchst du Hilfe?

Wenn Sie Hilfe mit Blade Inductrix Switch benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung ferngesteuertes Spielzeug Blade

Bedienungsanleitung ferngesteuertes Spielzeug

Neueste Bedienungsanleitung für -Kategorien-