Black Lion Audio PG-2 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Black Lion Audio PG-2 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
©2020 Black Lion Audio. The Black
Lion Audio ‘Lion Facelogo, BLA,
PG-2 are trademarks or registered
trademarks of Black Lion Audio.
This manual and any associated intel-
lectual property are subject to copyright
protection. No part of this document may
be reproduced in any form without explicit
written consent from Black Lion Audio.
Notice
This manual provides general information, preparation for
use, installation and operating instructions for the Black Lion
Audio PG-2 Power Conditioner.
The information contained in this manual is subject to
change without notice. Black Lion Audio makes no warran-
ties of any kind with regard to this manual, including, but not
limited to, the implied warranties of merchantability andt-
ness for a particular purpose. Black Lion Audio shall not be
liable for errors contained herein or direct, indirect, special,
incidental, or consequential damages in connection with the
furnishing, performance, or use of this material.
PG-2
Studio-grade power conditioner and surge protector
Owners Manual
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat regis-
ters, stoves, or other apparatus that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or third prong is provided for your safety. If the pro-
vided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particular-
ly at plugs, convenience receptacles, and the point where they exit
from the apparatus. If the power cord becomes frayed, stop using
immediately.
11. Use only attachments/accessories specied by the manufacturer
12. Use only with a cart, stand, tripod, bracket or table specied by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid in-
jury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is re-
quired when the apparatus has been damaged in any way, such as
power supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been ex-
posed to rain or moisture, does not operate normally, or has been
dropped.
15. This apparatus shall not be exposed to dripping or splashing, and
no object lled with liquids, such as vases, shall be placed on the
apparatus.
16. Note that this apparatus is not completely disconnected from the
AC mains service when the power switch is in the OFF position.
17. The mains plug or power inlet on the product is used as the discon-
nect device, so the disconnected device shall remain readily opera-
ble when reconnected.
18. Any changes or modications not expressly approved in this manu-
al could void your authority to operate this apparatus.
IMPORTANT !
Be sure to use a three prong AC cable that properly ts the power
source. Please use the correct fuse designated on the rear panel be-
fore plugging in the power cord. Improper selection can result in dam-
age to the unit that will not be covered under the warranty.
The lightning ash with an arrow-
head symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsu-
lated dangerous voltage within
the products enclosure that may
be of sucient magnitude to
constitute a risk of electric shock
to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
The Black Lion Audio PG-2 complies with all applicable / RoHS/ WEEE
European Union directives.
Do not attempt to service this unit yourself, as it will void your warran-
ty. Please check your unit carefully upon receipt and return to place
of purchase immediately if there are any problems with the product.
After that, the standard Black Lion Audio 3 YEAR warranty will apply
to defects in materials and workmanship.
Should your Black Lion Audio product require service,
please contact us on our customer service site:
https://www.blacklionaudio.com/contact. You must obtain an RA #
(Return Authorization number) from us before shipping a unit back to
us. This RA # must be clearly written on the outside of the box.
Please safely pack the units…It is best to use the original packing
materials. Black Lion Audio cannot be responsible for any damag-
es incurred in shipping to us due to poor packaging. PLEASE PACK
CAREFULLY and FULLY INSURE THE SHIPMENT.
INTERNATIONAL
For service or warranty assistance, please contact the Black Lion Au-
dio distributor in your country through the dealer from whom you pur-
chased this product.
LIMITED 3 YEAR WARRANTY
Black Lion Audios PG-2 is warranted by Black Lion Audio to be free
from defects in materials and workmanship for the period of THREE
(3) YEARS to the original purchaser. In the event of such defects, the
product will be repaired without charge or, at our option, replaced with
a new one if delivered to Black Lion Audio prepaid, together with a copy
of the sales slip or other proof of purchase date. The warranty excludes
problems due to normal wear, abuse, shipping damage or failure to use
the product in accordance with the specications.
All parts and labor are covered under this Limited Warranty. However,
if it is determined by Black Lion Audio that the device was damaged or
made defective through abuse, we reserve the right to charge the cus-
tomer for the cost of the repair.
Black Lion Audio shall not be liable for damages based upon inconve-
nience, loss of use of the product, loss of time, interrupted operation or
commercial loss or any other damages, whether incidental, consequen-
tial or otherwise. This warranty gives you specic legal rights, and you
may have other rights, which will vary from state to state.
This warranty is not transferable.
QUICK START GUIDE
Once you have installed your PG-2 where you need it, plug it in to an ap-
propriate power source. If you are not sure your source is correct, con-
sult with your local power company.
Plug in your equipment to the correct outlets on the PG-2.
Turn on the power. The digital and analog outlets are switched with a
delay sequence. The digital and analog outputs turn on with the power
switch and turn off after a six second delay. The high current outputs
turn on after six seconds and turn off with the power switch. This allows
any startup sequences to be nished before the high current devices
are turned on.
1. ON/OFF Switch: Once the PG-2 is plugged into a grounded 230VAC
outlet, turning the front panel POWER switch to the ON position will
sequentially power the components plugged into the rear panel
outlets.
2. GROUND OK: When this is on, the PG-2 is plugged into a properly
grounded power source. If the LED is not on, unplug the unit from
the power source and correct the fault.
3. Wiring Fault: This indicates the LINE and NEUTRAL wires in the
source are reversed. Unplug the unit immediately and consult an
electrician to x the fault.
4. Clean Power On: This LED indicates that the PG-2 is providing
clean, beautiful AC power to all connected components.
5. Abnormal Voltage: When this LED is ON, the PG-2 is warning about
under/over voltage (greater than 240VAC or less than 200VAC).
6. Protection ON: When this LED is on, the PG-2’s power surge circuit-
ry is functioning correctly. If this LED is OFF, the circuit has mal-
functioned. If it is OFF, unplug the unit immediately.
7. Digital Audio (Switched) Outlets: These outlets have a special l-
ter circuit that is designed to reduce AC supply interference to your
digital components (workstation, digital effects, etc.). They also
isolate the rest of your system from noise generated by the digital
components themselves.
8. Analog Audio Filter (Switched) Outlets: These outlets have a spe-
cial lter circuit that reduces audible noise in your analog compo-
nents (mixers, dynamic effects, etc.)
9. High Current Filter (Timed) Outlets: These outlets have a special
lter circuit designed to handle high current components like power
ampliers or Active Speakers.
10. Gold-plated ground post: Provides a connection point for any un-
grounded components.
11. Thermal Circuit Breaker: protects the PG-2 from power overload.
12. Breaker Open: When this LED is on, the thermal circuit breaker has
tripped due to an overload. Before resetting the breaker, nd the
reason for the overload.
13. Ultra-high Current AC Power Cable: integral high power, heavy duty
AC cable to maximize power transfer to high current components
such as ampliers.
14. Front Dimmer: This know controls a exible accessory light. Push
on/off and turn clockwise for brightness.
15. Front 12V XLR Lamp Socket: Provides 12VDC on PIN-2 to an acces-
sory lamp.
16. Rear Dimmer: This know controls a exible accessory light. Push
on/off and turn clockwise for brightness.
17. Rear 12V XLR Lamp Socket: Provides 12VDC on PIN-2 to an acces-
sory lamp.
18. Voltage Meter: Three-character LED displays the line voltage at the
source.
19. Amperage Meter: Three-character LED displays the amperage
used by equipment plugged into the PG-2.
20. Unswitched Convenience Outlets: These are ‘always on ltered
power outlets.
21. USB Charger: 5V1A convenience charger for USB devices.
Note: For best performance we recommend plugging analog compo-
nents into the analog outlets and digital to digital. It will not harm any
components if they are plugged into any other outlet.
SPECIFICATIONS
Voltage 120VAC 15A max
AC Mains Input Edison 15A Plug
Dimensions Width 438mm (19)
Height 88mm (2U)
Depth 250mm
Weight 6.8+kg
On with panel switch
off after six seconds
On after three seconds
off after three seconds
On after six seconds
off with panel switch
18 19 201412 21
16 10
11 1 15
7 8 9 17 13
2 4 5 63


Produktspezifikationen

Marke: Black Lion Audio
Kategorie: Nicht kategorisiert
Modell: PG-2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Black Lion Audio PG-2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Black Lion Audio

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-