Black Lion Audio PG-1 mkII Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Black Lion Audio PG-1 mkII (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
©2021 Black Lion Audio. The Black Lion Au-
dio ‘Lion Facelogo, BLA, PG-1 are trademarks
or registered trademarks of Black Lion Audio.
This manual and any associated intel-
lectual property are subject to copyright
protection. No part of this document may
be reproduced in any form without explicit
written consent from Black Lion Audio.
Notice
This manual provides general information, preparation for
use, installation and operating instructions for the Black Lion
Audio PG-1 mkII Power Conditioner.
The information contained in this manual is subject to
change without notice. Black Lion Audio makes no warran-
ties of any kind with regard to this manual, including, but not
limited to, the implied warranties of merchantability andt-
ness for a particular purpose. Black Lion Audio shall not be
liable for errors contained herein or direct, indirect, special,
incidental, or consequential damages in connection with the
furnishing, performance, or use of this material.
PG-1 mkII
Studio-grade power conditioner and surge protector
Owners Manual
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat regis-
ters, stoves, or other apparatus that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or third prong is provided for your safety. If the pro-
vided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particular-
ly at plugs, convenience receptacles, and the point where they exit
from the apparatus. If the power cord becomes frayed, stop using
immediately.
11. Use only attachments/accessories specied by the manufacturer
12. Use only with a cart, stand, tripod, bracket or table specied by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid in-
jury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is re-
quired when the apparatus has been damaged in any way, such as
power supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been ex-
posed to rain or moisture, does not operate normally, or has been
dropped.
15. This apparatus shall not be exposed to dripping or splashing, and
no object lled with liquids, such as vases, shall be placed on the
apparatus.
16. Note that this apparatus is not completely disconnected from the
AC mains service when the power switch is in the OFF position.
17. The mains plug or power inlet on the product is used as the discon-
nect device, so the disconnected device shall remain readily opera-
ble when reconnected.
18. Any changes or modications not expressly approved in this manu-
al could void your authority to operate this apparatus.
IMPORTANT !
Be sure to use a three prong AC cable that properly ts the power
source. Please use the correct fuse designated on the rear panel be-
fore plugging in the power cord. Improper selection can result in dam-
age to the unit that will not be covered under the warranty.
The lightning ash with an arrow-
head symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsu-
lated dangerous voltage within
the products enclosure that may
be of sucient magnitude to
constitute a risk of electric shock
to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
This product complies with all international standards for safety and
emissions including IEC62368 and FCC Part 15-B.
Do not attempt to service this unit yourself, as it will void your warran-
ty. Please check your unit carefully upon receipt and return to place
of purchase immediately if there are any problems with the product.
After that, the standard Black Lion Audio 3 YEAR warranty will apply
to defects in materials and workmanship.
U.S.A.
Should your Black Lion Audio product require service,
please contact us on our customer service site:
https://www.blacklionaudio.com/contact. You must obtain an RA #
(Return Authorization number) from us before shipping a unit back to
us. This RA # must be clearly written on the outside of the box.
Please safely pack the units…It is best to use the original packing
materials. Black Lion Audio cannot be responsible for any damag-
es incurred in shipping to us due to poor packaging. PLEASE PACK
CAREFULLY and FULLY INSURE THE SHIPMENT.
INTERNATIONAL
For service or warranty assistance, please contact the Black Lion Au-
dio distributor in your country through the dealer from whom you pur-
chased this product.
LIMITED 3 YEAR WARRANTY
Black Lion Audios PG-1 mkII is warranted by Black Lion Audio to be free
from defects in materials and workmanship for the period of THREE (3)
YEARS to the original purchaser. In the event of such defects, the prod-
uct will be repaired without charge or, at our option, replaced with a new
one if delivered to Black Lion Audio prepaid, together with a copy of the
sales slip or other proof of purchase date. The warranty excludes prob-
lems due to normal wear, abuse, shipping damage or failure to use the
product in accordance with the specications.
All parts and labor are covered under this Limited Warranty. However,
if it is determined by Black Lion Audio that the device was damaged or
made defective through abuse, we reserve the right to charge the cus-
tomer for the cost of the repair.
Black Lion Audio shall not be liable for damages based upon inconve-
nience, loss of use of the product, loss of time, interrupted operation or
commercial loss or any other damages, whether incidental, consequen-
tial or otherwise. This warranty gives you specic legal rights, and you
may have other rights, which will vary from state to state.
This warranty is not transferable.
QUICK START GUIDE
Once you have installed your PG-1 mkII where you need it, plug it in to
an appropriate power source. If you are not sure your source is correct,
consult with your local power company.
Plug in your equipment to the correct outlets on the PG-1 mkII.
Turn on the power. The digital and analog outlets are switched with a
delay sequence. The digital and analog outputs turn on with the power
switch and turn off after a six second delay. The high current outputs
turn on after six seconds and turn off with the power switch. This allows
any startup sequences to be nished before the high current devices
are turned on.
1. ON/OFF Switch: Once the PG-1 mkII is plugged into a grounded
120VAC outlet, turning the front panel POWER switch to the ON
position will sequentially power the components plugged into the
rear panel outlets.
2. GROUND OK: When this is on, the PG-1 mkII is plugged into a proper-
ly grounded power source. If the LED is not on, unplug the unit from
the power source and correct the fault.
3. Wiring Fault: This indicates the LINE and NEUTRAL wires in the
source are reversed. Unplug the unit immediately and consult an
electrician to x the fault.
4. Clean Power On: This LED indicates that the PG-1 mkII is providing
clean, beautiful AC power to all connected components.
5. Abnormal Voltage: When this LED is ON, the PG-1 mkII is warning
about under/over voltage.
6. Protection ON: When this LED is on, the PG-1 mkIIs power surge
circuitry is functioning correctly. If this LED is OFF, the circuit has
malfunctioned. If it is OFF, unplug the unit immediately.
7. Digital Filter (Switched) Outlets: These outlets have a special lter
circuit that is designed to reduce AC supply interference to your
digital components (workstation, digital effects, etc.). They also
isolate the rest of your system from noise generated by the digital
components themselves.
8. Analog Audio Filter (Switched) Outlets: These outlets have a spe-
cial lter circuit that reduces audible noise in your analog compo-
nents (mixers, dynamic effects, etc.)
9. High Current Filter (Timed) Outlets: These outlets have a special
lter circuit designed to handle high current components like power
ampliers or Active Speakers.
10. Gold-plated ground post: Provides a connection point for any un-
grounded components.
11. Thermal Circuit Breaker: protects the PG-1 mkII from power over-
load.
12. Breaker Open: When this LED is on, the thermal circuit breaker has
tripped due to an overload. Before resetting the breaker, nd the
reason for the overload.
13. Ultra-high Current AC Power Cable: integral high power, heavy duty
AC cable to maximize power transfer to high current components
such as ampliers.
14. Dimmer: This know controls a exible accessory light. Push on/off
and turn clockwise for brightness.
15. 12V XLR Lamp Socket: Provides 12VDC on PIN-2 to an accessory
lamp.
16. Numerical Display: Three-character LED displays the line voltage
at the source.
17. Unswitched Convenience Outlets: These are ‘always on ltered
power outlets.
18. USB Charger: 5V1A convenience charger for USB devices.
Note: For best performance we recommend plugging analog compo-
nents into the analog outlets and digital to digital. It will not harm any
components if they are plugged into any other outlet.
SPECIFICATIONS
Voltage 115VAC 15A max
AC Mains Input NEMA standard plug
Dimensions Width 438mm (19”)
Height 44mm (1U)
Depth 250mm
Weight 4.2+kg
IEC
62368
On with panel switch
off after six seconds
16 181715112
11
87 9 10 13
2 3 5 64
14
On after six seconds
off with panel switch


Produktspezifikationen

Marke: Black Lion Audio
Kategorie: Nicht kategorisiert
Modell: PG-1 mkII

Brauchst du Hilfe?

Wenn Sie Hilfe mit Black Lion Audio PG-1 mkII benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Black Lion Audio

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-