Black And Decker D2000 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Black And Decker D2000 (13 Seiten) in der Kategorie Eisen. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/13
PLEASE READ AND SAVE THIS USE AND CARE BOOK.
POR FAVOR LEA ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
VEUILLEZ LIRE ET CONSERVER CE GUIDE D’ENTRETIEN ET D’UTILISATION.
Digital Advantage
Digital Iron
Plancha digital
Fer numérique
Models
Modelos
Modèles
D2000
D2020
Accessories/Parts (USA/Canada)
Accesorios/Partes (EE.UU/Canadá)
Accessoires/Pièces (É.-U./Canada)
1-800-738-0245
USA/Canada 1-800-231-9786
Mexico 01-800-714-2503
www.blackanddecker.com
D2000.Pub178674RV06 1/17/06 3:29 PM Page 1
21
IMPORTANT SAFETY
INSTRUCTIONS
When using your iron, basic safety precautions should always be
followed, including the following:
Read all instructions before using.
Use iron only for its intended use.
To protect against a risk of electric shock, do not immerse the iron in
water or other liquid.
The iron should always be turned off (refer to “How to Use” section)
before plugging into or unplugging from an outlet. Never yank cord to
disconnect from outlet; instead grasp plug and pull to disconnect.
Do not allow cord to touch hot surfaces. Let iron cool completely
before putting away. Loop cord loosely around cord wrap when storing.
Always disconnect iron from electrical outlet when filling with or
emptying of water and when not in use.
Do not operate iron with a damaged cord or if the iron has been
dropped or damaged. To avoid the risk of electric shock, do not
disassemble the iron, take it to a qualified serviceman for examination
and repair. Incorrect reassembly can cause a risk of electric shock when
the iron is used.
Close supervision is necessary for any appliance being used by or near
children. Do not leave iron unattended while connected or on an
ironing board.
Burns can occur from touching hot metal parts, hot water, or steam.
Use caution when you turn a steam iron upside down or use the surge
of steam there may be hot water in the water tank. Avoid rapid
movement of iron to minimize hot water spillage.
SAVE THESE INSTRUCTIONS.
Soft-Touch Parts
Note: The soft-touch parts of this unit are free of natural rubber and latex. They are
safe for individuals allergic or sensitive to these materials.
POLARIZED PLUG (120V Models Only)
This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug is intended to fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning : This appliance is equipped with a tamper-resistant screw to prevent
removal of the outer cover. To reduce the risk of fire or electric shock, do not
attempt to remove the outer cover. There are no user-serviceable parts inside.
Repair should be done only by authorized service personnel.
Note: If the power supply cord is damaged, it should be replaced by qualified
personnel or in Latin America by an authorized service center.
SPECIAL INSTRUCTIONS
To avoid a circuit overload, do not operate another high-wattage
appliance on the same circuit.
If an extension cord is absolutely necessary, a 15-amperes and 120-volt,
or 7-ampere and 220-volt cord should be used. Cords rated for less
amperage may overheat. Care should be taken to arrange the cord so
that it cannot be pulled or tripped over.
D2000.Pub178674RV06 1/17/06 3:29 PM Page 2
43
Product may vary slightly from what is illustrated.
How to Use
This appliance is for houseold use only.
Before first use, remove any labels, stickers, or tags that may be attached to the
body or soleplate of the iron.
1. Using a clean measuring cup, tilt the iron and pour water
into the water-fill opening until the level reaches the MAX
mark on the water window . Do not overfill.(B)
2. Note: Use ordinary tap water for ironing. Do not use water
processed through a home softening system.
3. Plug in the iron. The light on the handle glows and a beep
sounds. The digital display illuminates. Temperature
setting 1 appears on the display.
4. To select a temperature setting from 1 to 7, press the
temperature button located below the digital display until
you reach the desired setting . The readout will display(C)
the setting number and an "up" arrow will flash until the
iron has reached the correct temperature for that setting.
Note: There is a convenient fabric/temperature guide on the
saddle of the iron (D).
For steam ironing, be sure the water reservoir is filled,
then turn the variable steam dial to the appropriate setting
for the fabric you are ironing . For optimum(E)
performance at any steam setting, let the iron stand
on its heel rest until operating temperature is reached,
as indicated on digital display (see fig. A), before
beginning to iron. When finished ironing on any steam
setting, turn the variable steam dial to "steam off" before
unplugging the iron.
For dry ironing, move the variable steam dial to the “steam off” setting.
5. When the correct temperature is reached the iron will beep twice and the
arrow will disappear. The temperature setting number will continue to be
displayed in the lighted area .
6. To change temperature settings while ironing, just push the temperature button.
When a lower setting is selected, a "down" arrow will flash until the iron
temperature has lowered to the correct level for that setting.
7. About the Auto Off: When the iron is idle for 10 minutes, the iron will beep
one tone, the digital display will flash "Auto Off" and the iron will turn off.
B
C
D
E
1. Spray nozzle
2. Water-reservoir opening
3. Digital display window
4. Power/temperature setting button
5. Surge-of-steam button
6. Spray button
7. Power indicator light
8. Heel rest
9. Water window with MAX mark
10. Variable steam dial
Note: D2020 electric cord is 2 feet longer.
Models D2000 and D2020
1. Digital display window
2. Surge-of-steam button
3. Spray button
4. Power/temperature
setting button
A
D2000.Pub178674RV06 1/17/06 3:29 PM Page 4


Produktspezifikationen

Marke: Black And Decker
Kategorie: Eisen
Modell: D2000

Brauchst du Hilfe?

Wenn Sie Hilfe mit Black And Decker D2000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Eisen Black And Decker

Bedienungsanleitung Eisen

Neueste Bedienungsanleitung für -Kategorien-