Bitspower BPTA-WDPO11DS-P5D Bedienungsanleitung

Bitspower Nicht kategorisiert BPTA-WDPO11DS-P5D

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bitspower BPTA-WDPO11DS-P5D (18 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/18
[ 1 ]
Accessories
1 3
4
2
BPTA-WDPO11DS-P5D
BPTA-EFW-GS
M6x32 Screw
1 SET
1 PC
8 PCS
Bitspower Sedna O11DS for LIAN
LI O11 Dynamic MINI Series (P5D)
Digital RGB PIN on 1motherboard or 2
other equipment.
motherboard
DRGB Multi Function Controller
(Not included)
BPTA-DRGBMFC
1
2
V1
BPTA-EXAIR-GS 1 PC 53PIN/4PIN transfer 4PIN 1 PC
[ 2 ]
Th e w a te r t a nk an d p u m p
can't be disassembled! Once
d i s a s se mbl e d , the r e i s no
guarantee.
Power Supply and Pump
Pump Spec
Rated voltage:12V DC
Power consumption:20W
Maximum 󽗊ow:14.5±15% L/min
Noise:≤ 40dBA
Ambient temperature:-25~70℃
PWM:Yes
MTBF:15,000 hours
Warranty:2 years
A:Negative electrode -
B:Positive electrode +
C:Speed signal
D:Speed control signal
A B C D
Power cord
Press the button to release the
air.
It is recommended to install
the air-exhaust fitting on the
reservoir, above the water line.
It is recommended to install
the water-exhaust fitting at
the lowest point of the water
cooling system.
Re pl a c e w i t h t h e w a t e r -
exhaust part. When screwing
in the part, water will start to
discharge, it is recommended
to connect tubing beforehand
to control the water outó½—Šow.
Unscrew the top of the water-
exhaust ó½—‰tting.
BP-ETWTA-EXAIR
[ 3 ]
The warranty will be void if any of the situations below happen.
Water Block
- The CPU block and the screws in it has any trace of disassemble.
- The top plate inlet and outlet ports, due to improper use of external forces, are cracked.
Radiator
- The ó½—‰n of the radiator are broken or deformed due to improper use of external forces.
- The inlet and outlet of the radiator are cracked due to improper use of external forces.
Fitting
- There are signs of damage caused by instrument clamping on the ó½—‰ttings.
PUMP
- Pump damage from pump operation without any liquid.
- Pump damage caused by water leak on the pump's PCB.
- Water tank has been separated from the pump.
Fan
- Fan damaged by water leak.
Choose your desired dye color and mix it with pure
distilled water. Pour the water mix into the reservoir
via the water filling hole. Once the reservoir is 90%
full, turn on the power supply for the pump to run
and let the air exit the loop. Turn off the power
supply when the reservoir is near empty. Repeat until
all the air has exited the loop.
(In order to power the pump only, connect the power
switch connector to the 24 pin cable of the power
supply. This will allow the power supply to bypass
the motherboard and make the pump work alone.)
refer toBP-WTP-J04
Product Warranty Rules
Water


Produktspezifikationen

Marke: Bitspower
Kategorie: Nicht kategorisiert
Modell: BPTA-WDPO11DS-P5D

Brauchst du Hilfe?

Wenn Sie Hilfe mit Bitspower BPTA-WDPO11DS-P5D benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Bitspower

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-