Biostar J3060NH Bedienungsanleitung

Biostar Nicht kategorisiert J3060NH

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Biostar J3060NH (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 26 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

How to update BIOS?

There are three ways to update the BIOS:

BIOS Update Utility, BIOS Online Update Utility and BIOS Flasher.

BIOS update utility

1. Installing BIOS Update Utility from the DVD Driver.

2. Download the proper BIOS from www.biostar.com.

tw .

3. Open BIOS Update Utility and click the Update

BIOS button on the main screen.

4. A warning message will show up to request your

agreement to start the BIOS update. Click Yes to start

the update procedure.

5. Choose the location for your BIOS le in the system.

Please select the proper BIOS le, and then click on

Open. It will take several minutes, please be patient.

6. After the BIOS Update process is nished, click on

OK to reboot the system.

7. While the system boots up and the full screen logo shows up, please press the

<Delete> key to enter BIOS setup.

After entering the BIOS setup, please go to the Save & Exit, using the Restore

Defaults function to load Optimized Defaults, and select Save Changes and Reset to

restart the computer. Then, the BIOS Update is completed.

Backup BIOS

Click the Backup BIOS button on the main screen for

the backup of BIOS, and select a proper location for

your backup BIOS le in the system, and click Save.

Online Update Utility

1. Installing BIOS Update Utility from the DVD

Driver.

2. Please make sure the system is connected to

the internet before using this function.

3. Open BIOS Update Utility and click the Online

Update button on the main screen.

4. An open dialog will show up to request your

agreement to start the BIOS update. Click Yes to

start the online update procedure.

5. If there is a new BIOS version, the utility will ask

you to download it. Click Yes to proceed.

6. After the download is completed, you will be

asked to program (update) the BIOS or not. Click

Yes to proceed.

7. After the updating process is nished, you will

be asked you to reboot the system. Click OK to

reboot.

8. While the system boots up and the full screen logo shows up, press <Delete>

key to enter BIOS setup.

After entering the BIOS setup, please go to the Save & Exit, using the Restore

Defaults function to load Optimized Defaults, and select Save Changes and Reset to

restart the computer. Then, the BIOS Update is completed.

BIOSTAR BIOS asher

BIOSTAR BIOS Flasher is a BIOS ashing utility providing you an easy and simple

way to update your BIOS via USB pen drive.

1. This ulity only allows storage device with FAT32/16 format and single paron.

2. Shung down or reseng the system while updang the BIOS will lead to system boot

failure.

The BIOSTAR BIOS Flasher is built in the BIOS ROM. To enter the utility, press <F12>

during the Power-On Self Tests (POST) procedure while booting up.

Updating BIOS with BIOSTAR BIOS Flasher

1. Go to the website to download the latest BIOS le for the motherboard.

2. Then, copy and save the BIOS le into a USB ash (pen) drive.

3. Insert the USB pen drive that contains the BIOS le to the USB port.

4. Power on or reset the computer and then press <F12> during the POST process.

5. After entering the POST screen, the BIOS-

FLASHER utility pops out. Choose [fs0] to search for

the BIOS le.

6. Select the proper BIOS le, and a message asking

if you are sure to ash the BIOS le. Click Yes to start

updating BIOS.

7. A dialog pops out after BIOS ash is completed,

asking you to restart the system. Press the [Y] key to

restart system.

8. While the system boots up and the full screen logo shows up, press <Delete>

key to enter BIOS setup.

After entering the BIOS setup, please go to the Save & Exit, using the Restore Defaults

function to load Optimized Defaults, and select Save Changes and Reset to restart the

computer. Then, the BIOS Update is completed.

All the informaon and content above about the soware are subject to be changed

without noce. For beer performance, the soware is being connuously updated. The

informaon and pictures described above are for your reference only. The actual informaon

and sengs on board may be slightly dierent from this manual.

Produktspezifikationen

Marke:	Biostar
Kategorie:	Nicht kategorisiert
Modell:	J3060NH
Prozessorhersteller:	Intel
Anzahl Prozessorkerne:	2
WLAN:	Nein
Breite:	170 mm
Tiefe:	170 mm
Mitgelieferte Kabel:	SATA
Energiequelle:	ATX
Anzahl USB 2.0 Anschlüsse:	2
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Warentarifnummer (HS):	84733020
Anzahl HDMI-Anschlüsse:	1
Audio Kanäle:	5.1 Kanäle
HDCP:	Ja
Grafikkarte:	HD Graphics
Prozessor-Taktfrequenz:	2.48 GHz
Prozessorfamilie:	Intel® Celeron®
Prozessor:	J3060
USB 3.2 Gen 1 (3.1 Gen 1) Anzahl der Anschlüsse vom Typ A:	2
Schnellinstallationsanleitung:	Ja
Anzahl VGA (D-Sub) Anschlüsse:	1
Kompatible Prozessoren:	Intel® Celeron®
Motherboardformfaktor:	mini ITX
Motherboard Chipsatz Familie:	Intel
Audio-Chip:	Realtek ALC662
Komponente für:	PC
PC Gesundheitsüberwachung:	CPU, Temperature, Voltage
Unterstützte Arbeitsspeicher:	DDR3L-SDRAM
Anzahl der Speichersteckplätze:	2
Arbeitsspeicher Typ:	SO-DIMM
Speicherkanäle:	Zweikanalig
Unterstützte Arbeitsspeichergeschwindigkeit:	1066,1600 MHz
RAM-Speicher maximal:	16 GB
Unterstützte Speicherlaufwerk-Schnittstellen:	SATA III
PCI-Express x1 (Gen 2.x)-Anschlüsse:	1
DirectX-Version:	11.1
Treiber enthalten:	Ja
Anzahl PS/2 Anschlüsse:	2
SATA III Anschlüsse:	2
Anzahl USB 2.0 Schnittstellen:	2
Front Panel Audiostecker:	Ja
Frontpanel-Stecker:	Ja
Serielle Port-Headers:	1
USB 3.2 Gen 1 (3.1 Gen 1) Anschlüsse:	1
Ethernet Schnittstellen Typ:	Gigabit Ethernet
LAN-Controller:	Realtek RTL8111H
Mitgelieferte Software:	BullGuard\nBIO-Remote2\nSmart Speed LAN
Power Fan Connector:	Ja
Kühlung:	Passiv
SATA Anschlüsse:	2
Duplex Scan-Geschwindigkeit (Farbe):	Supports Solid capacitor\nSupports BIOS-Flasher\nSupports Charger Booster\nSupports BIOS Online Update
Ethernet/LAN:	Ja