BFB 3000 Bedienungsanleitung
BFB
3D-Drucker
3000
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für BFB 3000 (73 Seiten) in der Kategorie 3D-Drucker. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/73
Document No: D100253
BFB-3000
Set Up and Operations Manual
[Version 3.0]
BFB-3000 Set Up and Operations Manual
Document No: D100253 2
1 Introduction
Thank you for purchasing your BFB-3000.
Before first use, the BFB-3000 needs careful setting up. The list below illustrates some of
the essential operations which must be carried out before operation:
Remove existing prints
Check the bed is clear of any build material
Check the bed is fitted correctly
Power up
Manual move
Check the hot-end nozzles are clean from plastic debris
Check the bed is level
Check the bed is referenced to the extruder nozzles
Load the extruders
Start a print
Print a successful raft
Print the first model
Failure to carry out all of the set-up procedures contained in this
document will damage the machine.
This document has been designed to illustrate the essential procedures and get you up and
running as quickly as possible. Please take time to understand how the process works and
complete each procedure in the order set out in this manual. Setting up can take from
20-60 minutes depending on the skill level of the operator.
Support is available by raising a ticket at www.bitsfrombytes.com
We welcome any feedback you may have, and wish you well in your 3D printing!
BFB-3000 Set Up and Operations Manual
Document No: D100253 3
2 Table of Contents
1 Introduction ................................................................................................................... 2
2 Table of Contents ........................................................................................................... 3
3 Manual symbols ............................................................................................................. 5
4 How this manual works .................................................................................................. 6
5 Process overview – how the BFB-3000 works ................................................................ 7
5.1 BFB-3000 ................................................................................................................... 7
5.2 Tool kit ....................................................................................................................... 8
5.3 Creating a 3D model .................................................................................................. 9
6 Initial set-up ................................................................................................................. 12
6.1 Remove existing prints ............................................................................................ 12
6.2 Check the bed is clear of any build material ............................................................ 13
6.3 Check the bed is fitted correctly .............................................................................. 14
6.3.1 Remove the bed ............................................................................................. 15
6.3.2 Fit the bed ...................................................................................................... 16
6.4 Power up ................................................................................................................. 17
6.5 Manual move ........................................................................................................... 18
6.6 Check the hot-end nozzles are clean from plastic debris ......................................... 20
6.7 Check the bed is level .............................................................................................. 21
6.8 Check the bed is referenced to the extruder nozzles ............................................... 28
6.9 Load the extruders................................................................................................... 31
6.9.1 Load the filament ........................................................................................... 31
6.9.2 Extruder control ............................................................................................. 37
6.9.3 Purge the extruder ......................................................................................... 38
6.10 Start a print .......................................................................................................... 40
6.11 Print a successful raft............................................................................................ 41
6.11.1 Print the raft check file ................................................................................... 43
6.11.2 Examine the raft check file ............................................................................. 44
6.11.3 Potential problems ......................................................................................... 45
6.11.4 Perfect the raft ............................................................................................... 46
Produktspezifikationen
| Marke: | BFB |
| Kategorie: | 3D-Drucker |
| Modell: | 3000 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit BFB 3000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung 3D-Drucker BFB
7 August 2023
Bedienungsanleitung 3D-Drucker
- 3D-Drucker Anker
- 3D-Drucker Exibel
- 3D-Drucker Gembird
- 3D-Drucker Velleman
- 3D-Drucker Renkforce
- 3D-Drucker Polaroid
- 3D-Drucker Weller
- 3D-Drucker Kodak
- 3D-Drucker CraftBot
- 3D-Drucker Flashforge
- 3D-Drucker German RepRap
- 3D-Drucker Monoprice
- 3D-Drucker Sindoh
- 3D-Drucker Bq
- 3D-Drucker Dimension
- 3D-Drucker Easy Threed
- 3D-Drucker GooVer
- 3D-Drucker MakerBot
- 3D-Drucker PP3DP
- 3D-Drucker XYZprinting
- 3D-Drucker Leap Frog
- 3D-Drucker Wasp
- 3D-Drucker Anycubic
- 3D-Drucker Zortrax
- 3D-Drucker 3D Systems
- 3D-Drucker LulzBot
- 3D-Drucker Snapmaker
- 3D-Drucker Creality3D
- 3D-Drucker Creality
- 3D-Drucker Raise3D
- 3D-Drucker Wanhao
- 3D-Drucker Artillery
Neueste Bedienungsanleitung für -Kategorien-
27 September 2024
5 September 2024
4 September 2024
3 September 2024
3 September 2024
2 September 2024
2 September 2024
1 September 2024
31 August 2024
31 August 2024