Besco SB1840 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Besco SB1840 (36 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/36
E N G L I S H S V E N S K A N O R S K S U O M I
No. 30-8146, 30-8147
Model: Besco BN1850 + SB1840
Ver. 200801
Nail/Stapel Gun
Spikpistol/Häftpistol
Spiker/heftepistol
Naulain/Hakasnaulain

E N G L I S H

Nail/Stapel Gun
Article no. 30-8146, 30-8147
Please read the entire instruction manual before using and save it for future use.
We apologise for any text or photo errors and any changes of technical data.
If you have any questions concerning technical problems please contact our
Customer Service Department (see address on reverse.)
Warning!
• Never hold your hand or other part of your body close to the muzzle of the gun when
the tool is connected to the compressed air supply.
• Never aim the tool at anyone.
• Do not play with the tool.
• Never pull the trigger unless the muzzle is pointed at the workpiece.
• Always handle the tool cautiously.
• Never pull the trigger or depress the safety trigger whilst reloading the tool.
Follow these instructions for safety reasons
• Remember that the nail/staple gun is not a toy but a tool. Do not play with this tool.
• Only use the tool in the intended manner.
• Never use the tool in a way where the muzzle is pointed at yourself or someone else
in the working area.
• Do not use the nail/staple gun as a hammer.
• Carry the tool by its handle and not by the air hose.
• Never carry the tool with your nger on the trigger.
• Never modify the nail/staple gun in any way.
• Always be aware that misuse and wrongful handling of this tool may result in injuries
to yourself or others.
• Never x/tape the safety trigger and/or the trigger in active mode.
• Never leave a connected nail/staple gun without supervision.
• Never use this nail/staple gun if it does not have a readable warning label.
• Do not continue using a nail/staple gun which leaks air or does not function properly.
Contact us if your nail/staple gun is not functioning properly.
3
E N G L I S H
• When using the nail/staple gun, hold it in such a manner that no injuries can occur to
your body or head if the nail/staple gun’s recoil should increase due to a drop in air
pressure or changes in the hardness of the workpiece.
• Do not nail/staple too close to the edge of the workpiece. The nail/staple could pass
through the workpiece and cause injuries.
• Disconnect the air before transporting the nail/staple gun.
• Make regular checks on the trigger and safety trigger to make sure they work
properly.
• Do not disassemble any part of the nail/staple gun, especially not the safety trigger
(the contact-operation).
• Do not make temporary repairs without the right equipment.
• Avoid weakening the housing by engraving etc.
• Make sure you know where all electrical wiring etc. in walls, oors and ceilings are
located before you start using the nail/staple gun.
Always handle this tool with care
• Never play with it.
• Never pull the trigger unless the muzzle is pointed at the workpiece.
• Keep others at a safe distance from the tool when it is use, as it is possible that the
tool will operate accidentally and injure someone.
• The operator must not hold in the trigger whilst the safety trigger is depressed except
during nailing because there is a risk of the safety trigger brushing against something
or someone accidentally, causing the gun to go off.
• Keep hands and other body parts away from the muzzle of the gun. A tool with a
safety trigger can jump due to the recoil of the nail gun, resulting in a second nail
being î› red accidentally, causing damage.
• Check the safety trigger regularly. Do not use the tool if the arm is not working
properly because accidental î› ring could occur. Do not change anything if the safety
trigger is working properly (î› res the gun when the nose is pressed against the
workpiece)
• Do not try to re nails into existing nails as they might bend and damage the gun.
• Do not nail too close to the edge of the workpiece because the wood might split and
the nail could cause damage.


Produktspezifikationen

Marke: Besco
Kategorie: Nicht kategorisiert
Modell: SB1840

Brauchst du Hilfe?

Wenn Sie Hilfe mit Besco SB1840 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Besco

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-