BeSafe iZi Go Modular Bedienungsanleitung
BeSafe
Autokindersitze
iZi Go Modular
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr BeSafe iZi Go Modular (98 Seiten) in der Kategorie Autokindersitze. Dieser Bedienungsanleitung war fĂźr 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/98
1 3
4
5
2
b
c
e
h
g
d
f
a
i
k
m
l
j
click!
> 25 cm
104
110
116
122
128
134
140
146
152
158
164
170
176
187
193
199
1
14
20
26
32
38
44
50
56
62
68
74
80
86
92
98
USER MANUAL
Stature height 40-75 cm
Max. weight: 13 kg
Rearfacing only
Age approx.: 0-12 mths
UN regulation no. R129 i-Size
8 9
! Vital information
⢠The child seat MUST NOT be installed in a front
passenger seat WITH AN ACTIVATED AIRBAG.
⢠iZi Go Modular can be installed rearfacing on iZi Modular
i-Size base or can be installed rearfacing with a 3-point car belt,
approved according to UN/ECE Regulation No.16 or other equivalent
standards.
⢠iZi Go modular is approved for children with a stature height from 40
to 75 cm, with a max. weight of 13 kg.
⢠The harness straps must always be locked when the child is in
the seat.
⢠The harness straps must be tightened without slack and not twisted.
⢠The shoulder pads contain magnets. Magnets can inďŹuence
electronic equipment such as pacemakers.
⢠Protect any part of the childâs body which is exposed to the sun.
⢠Remove the baby cushion including the white wedge, when the child
is taller then 60 cm. or older then 4 months.
⢠The white wedge in the bottom of the baby cushion can be removed
when the child needs more space under the buckle of the harness
system. (Not on all models)
⢠Remove the head space reducers on both sides from the headrest
cushion when the child is older then 3 months or if the head is not
ďŹtting anymore or when the baby has a stature height higher then 60
cm. (Not on all models)
⢠After an accident, the seat must be replaced. Although it may look
undamaged, if you were to have another accident, the seat may not
be able to protect your child to the level to which it was designed.
⢠Prevent the seat from becoming trapped or weighed down by
luggage, seats and/or slamming doors.
⢠Make sure you can ďŹt no more than one ďŹnger between the harness
and your child (1 cm).
⢠DO NOT attempt to dismantle, modify or add any part to the seat.
Warranty will be void if non-original parts or accessories are used.
⢠Never leave your child unattended in the seat.
⢠Make sure all passengers are informed about how to release your
6
8
9
7 10 11 16 17
19
20 21
18
12
14
15
13
click!
< 60 cm
0-4 months
> 60 cm
> 4 months
Thank you for choosing BeSafe iZi Go Modular
! It is important that you read this user manual BEFORE
installing your seat. Incorrect installation could endanger
your child.
10 11
⢠Carrying handle (1a)
⢠Head cushion (1b)
⢠Head space reducer (1c)
⢠Handle release buttons (2x) (1d)
⢠Shoulder straps (2x) (1e)
⢠Hip belt hook (2x) (1f)
⢠Baby cushion (1g)
⢠Harness buckle (1h)
⢠Sun canopy (1i)
⢠Stroller release handles (4x) (1j)
⢠Shoulder belt hook (1k)
⢠Harness height adjuster (1l)
⢠Stroller adapter house (1m)
Preparing to install
Installation of the seat on the i-Size base
Removal of the seat of the i-Size base
Belt installation
1. Check if the ISOďŹx and ďŹoor support indicators on the base
are green. (2)
2. Position the seat in the correct position on the base untill it clicks with
the base and the indicator at the front shows green. (3)
3. Leave the carrying handle up in the carrying position.
4. When the seat is positioned rearfacing on the back seat of the vehicle,
you should, if possible, push the front seat of the vehicle backwards,
so that it is in contact with the child seat. If it is not possible to obtain
contact with the child seat, push the back rest of the front seat of the
vehicle forward as far as possible. (4)
5. The seat is delivered with removable SIP+ (side impact protection +).
This extra side impact protection should be used on the doorside of
the vehicle. It can be connected by slotting between the seatshell and
the fabric. The seat already oîers high level integrated side impact
protection. This extra side impact protection improves the protection
in the side impact still further. (Not on all models) Do not use the SIP+
on the seat when the space between seat and door of the vehicle is too
small, which might lead to a situation where the seat is not positioned
correctly on the vehicle seat.
⢠The seat can be taken oî by pulling the seat release handle at the
front of the base.
1. Position the seat on the vehicle seat. Make sure the carrying handle
is up in the carrying position. (5)
2. Guide the hip belt of the 3-point-belt over the blue sections under the
hip belt hooks and fasten the seat belt with a âclickâ. (6)
3. Guide the shoulder belt over the blue section through the shoulder
belt hook at the rear side of the seat shell. (7)
4. Tighten the 3-point belt by pulling the belt through the hip belt hooks
and through the shoulder belt hook until it is as tight as possible. (8)
5. Leave the carrying handle up in carrying position.
Positioning of the child
Baby cushion
1. Check that the shoulder strap slots are level with your childâs
shoulders. (9)
2. Pull the shoulder straps up while pressing the button of the central
adjuster. (10)
3. Open the harness buckle. (11)
4. The height of the shoulder straps and the head cushion can be
adjusted by pulling the release handle upwards at the back of the seat
and pulling the handle up or down. (12)
5. Position the shoulder straps over the marking at the sides of the seat
to use the magnets to keep the harness open while you position the
child. (13)
6. When the child is positioned, place the shoulder straps over the
childâs shoulders and close the buckle: CLICK! (14)
7. Pull the harness strap through the central adjuster in the direction of
the arrow straight up/forwards. Continue pulling until the harness is a
comfortable but a ďŹrm ďŹt. (15)
8. You can protect your child against the sun by raising the sun canopy.
⢠The baby cushion oîers extra comfort for young babies. As baby
grows the thickness of the baby cushions can be adjusted.
⢠0-4 m (16)
⢠4 m + (17)
Produktspezifikationen
| Marke: | BeSafe |
| Kategorie: | Autokindersitze |
| Modell: | iZi Go Modular |
Brauchst du Hilfe?
Wenn Sie Hilfe mit BeSafe iZi Go Modular benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Autokindersitze BeSafe
8 Oktober 2022
8 Oktober 2022
Bedienungsanleitung Autokindersitze
- Autokindersitze BĂŠbĂŠ Confort
- Autokindersitze Brevi
- Autokindersitze Chicco
- Autokindersitze Hauck
- Autokindersitze Peg Perego
- Autokindersitze Jane
- Autokindersitze ABC Design
- Autokindersitze Giordani
- Autokindersitze Maxi-Cosi
- Autokindersitze Cybex
- Autokindersitze BabyGO
- Autokindersitze Be Cool
- Autokindersitze Britax-RĂśmer
- Autokindersitze Joie
- Autokindersitze Kinderkraft
- Autokindersitze BRIO
- Autokindersitze Casualplay
- Autokindersitze Kiddy
- Autokindersitze Recaro
- Autokindersitze StorchenmĂźhle
- Autokindersitze Nania
- Autokindersitze Osann
Neueste Bedienungsanleitung fĂźr -Kategorien-
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022