BeamZ DMX384 Bedienungsanleitung

BeamZ Beleuchtung DMX384

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für BeamZ DMX384 (32 Seiten) in der Kategorie Beleuchtung. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/32

DMX384 Controller

Ref. nr.: 154 .048

I NSTRUCTION MANUAL

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

V1.0

ENGLISH

Congratulations to the purchase of this Beamz product. Please read this manual thoroughly prior to using the product in order to

benefit fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions

to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the product, please ask advice from a

specialist. When the unit is switched on for the first time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the

product. This may cause electrical shock and

malfunction.

- Do not place the product near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The product is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the product from a mains outlet,

always pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualified technician.

- If the product is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the product on. Contact your dealer.

Do NOT connect the product to a rheostat or dimmer.

- To avoid fire and shock hazard, do not expose the

product to rain and moisture.

- All repairs should be carried out by a qualified technician

only.

- Connect the product to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the product will not be used

for a longer period of time, unplug it from the mains. The

rule is: Unplug it from the mains when not in use.

- If the product has not been used for a longer period of

time, condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the

product in humid rooms or outdoors.

- During operation, the housing becomes very hot. Do not

touch it during operation and immediately after.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Secure the product with an extra safety chain if the unit is

ceiling mount. Use a truss system with clamps. Make

sure nobody stands in the mounting area. Mount the

effect at least 50cm away from inflammable material and

leave at least 1 meter space on every side to ensure

sufficient cooling.

- rThis p oduct contains high intensity LEDs. Do not look

into the LED light to prevent damage to your eyes.

- Do not repeatedly switch the product on and off. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Only operate the product with clean hands.

- Do not force the controls.

- If the product has fallen, always have it checked by a

qualified technician before you switch the product on

again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the product with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the product off prior to unplugging it from the

mains and/or other equipment. Unplug all leads and

cables prior to moving the product.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- -The mains voltage is 220 240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this product.

- Keep the original packing material so that you can

transport the product in safe conditions

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks

should be aware of the effects that this light effect may have on them.

The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate

and their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.

Specifications can be changed without prior notice.

prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the

warnings contained in this manual. Beamz cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving , carefully unpack the carton, check the contents to ensure that all parts are the product

present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if

any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing

materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original

factory box and packing.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

POWERSUPPLY

On the label on the backside of the is indicated on this type of power supply must be connected. Check that the mains product

voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also

be directly connected to the mains and may be used. No dimmer or adjustable power supply.

Always connect the to a protected circuit (circuit breaker or fuse). Make sure the device device has an appropriate

electrical ground to avoid the risk of electrocution or fire.

DMX-512 CONNECTION

If you are using a standard DMX controller, you can connect the DMX-output of the controller directly to the DMX nput of the -i

first unit in a DMX-chain. Always connect the output of one unit with the input of the next unit until all units are connected.

If you use a controller with 5 pin DMX connection you will need to use a 5-pin to 3 pin adapte- r.

At the last fixture, the DMX cable has to be

terminated. Solder a 120 Ohm resistor between

s -ignal ( ) and signal (+) into a 3-pin XLR connector

and plug this into the DMX output of the last

fixture in the chain.

Fixture number

Default DMX starting address

Binary dipswitch settings switch to the “on position”

1, 6

1, 7

1, 6, 7

129

1, 8

161

1, 6, 8

193

1, 7, 8

225

1, 6, 7, 8

257

1, 9

289

1, 6, 9

321

1, 7, 9

353

1, 6, 7, 9

3- -Pin XLR to 5 Pin XLR Conversion

Conductor

3-Pin XLR

Female

(Out)

5-Pin XLR Male

(In)

Ground/Shield

Pin 1

Data

Compliment (-

signal)

Pin 2

Data True (+

signal)

Pin 3

Not Used

Pin 4 – Do Not

Use

Not Used

Pin 5 – Do Not

Use

Produktspezifikationen

Marke:	BeamZ
Kategorie:	Beleuchtung
Modell:	DMX384
USB Anschluss:	Ja
Breite:	520 mm
Gewicht:	2600 g
Produktfarbe:	Schwarz
Steuerung:	Buttons, Faders
Höhe:	190 mm
Energiequelle:	AC
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Eingebautes Display:	Nein
Zertifizierung:	CE
Typ:	Beleuchtungssteuerung
Menge pro Packung:	1 Stück(e)
Ein-/Ausschalter:	Ja
Ausgangsstrom:	1 A
Ausgangsspannung:	12 V
Länge (mm):	770 mm
Anzahl der DMX-Kanäle:	384 Kanäle
DMX-Ausgang:	Ja
DMX-Stecker-Typ:	XLR3
Anzahl der unterstützten Vorrichtungen:	12
Anzahl der programmierbare Szenen:	240