BDI Milo 1055 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für BDI Milo 1055 (3 Seiten) in der Kategorie Tisch . Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/3
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to
your BDI products. Register today, and you will be entered to win
free a BINK table from BDI: www.bdiusa.com/register
Placement and Maintenance
Your MILO Media Table is designed for indoor use on level floors.
Clean wood veneer and steel parts with a moist cloth.
Milo is engineered for easy assembly. Carefully follow this
procedure to prevent any damage. Do not use power tools for
assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly
workspace should be a non-marring surface such as carpet.
For missing hardware pieces, contact BDI Customer Service at:
customerservice@bdiusa.com.
For all other concerns, please contact your BDI retailer.
Designed by Louis A Lara.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Milo & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2018, BDI
Made in China. 05.22.2018 V1
T1 Hex Wrench x 1
A1 Mounting Plate x 1
A2 Post x 1
H1 Threaded Rods x 2
H1 Flathead Screw
10mm x 4
A3 Base x 1
C1 Top Panel x 1
Tool Included:
bdiusa.com
customerservice@bdiusa.com
MILOTM 1055
MEDIA TABLE
bdiusa.com
customerservice@bdiusa.com
MILO 1055
MEDIA TABLE
2
Step 2 - Attach Mounting Plate to Top Panel
Place top panel C1 upside down on a non-marring surface. Position over the 4 threaded mounting plate A1
inserts with the stem towards the outside and attach with 4 flathead screws H1 hex wrench T1 using .
T1
H1
A1
Threaded
Inserts
Overhead View
C1
Stem towards
edge
bdiusa.com
customerservice@bdiusa.com
MILO 1055
MEDIA TABLE
3
Step 3 - Attach Post and Base
Slide either end of the onto the stem of . Place the stem of into the post 2A mounting plate A1 base A3
opposite end of the and secure in place with 1 hand. With your other hand, slide post A2 2 threaded rods H2
into the channels that run through and into the holes on the . Tighten with post A2 mounting plate A1 hex
wrench T1.
CAUTION:
Do not sit or stand on your Milo table.
Maximum capacity: 25 lbs / 11 kg
T1
A1
H2 x 2
A2
A3
Stem
Produktspezifikationen
| Marke: | BDI |
| Kategorie: | Tisch |
| Modell: | Milo 1055 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit BDI Milo 1055 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Tisch BDI
9 September 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
Bedienungsanleitung Tisch
- Tisch Tristar
- Tisch Cougar
- Tisch Princess
- Tisch Solis
- Tisch Powerfix
- Tisch IKEA
- Tisch Black And Decker
- Tisch WOOOD
- Tisch Bartscher
- Tisch Shure
- Tisch Leen Bakker
- Tisch Livarno
- Tisch MADE
- Tisch Mio
- Tisch Foppapedretti
- Tisch Saro
- Tisch JYSK
- Tisch Florabest
- Tisch Vtech
- Tisch BoConcept
- Tisch Talgø
- Tisch Wehkamp
- Tisch Genesis
- Tisch Interstuhl
- Tisch Zuiver
- Tisch Normann
- Tisch Melinera
- Tisch Klarfit
- Tisch Paidi
- Tisch Iceberg
- Tisch Little Tikes
- Tisch VirtuFit
- Tisch Glorious
- Tisch Boori
- Tisch Crelando
- Tisch InfaSecure
- Tisch AXI
- Tisch Livarno Lux
- Tisch Butler
- Tisch MaximaVida
- Tisch Step2
- Tisch Bretford
- Tisch Triumph Sports
- Tisch Hooker
- Tisch Calligaris .com
- Tisch Dorel
- Tisch Cool Head
- Tisch Special-T
- Tisch Bbf
- Tisch Mount-It!
- Tisch Skip Hop
- Tisch Brixton
- Tisch Four Hands
- Tisch Campart Travel
- Tisch Home Trends & Design
- Tisch Early Settler
- Tisch MooreCo
Neueste Bedienungsanleitung für -Kategorien-
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024