Baumr-AG BPR1000 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Baumr-AG BPR1000 (109 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/109
User Manual
[Revision 1. ]0 July 2022
READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY
VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in appearance,
assembly, inclusions, specifications, description, and packaging.
The product is NOT supplied with engine oil, although traces of oil from the manufacturing process may be present. It is essential to add
adequate engine oil of the correct type to the engine before use. Failure to add engine oil will void the product warranty.
BPR1000 Tracked Front End Loader Mini Dumper
E&OE © -AG 3 2022 Baumr
General Electrical Safety
• Inspect electrical equipment, extension
cords, power bars, and electrical fittings for
damage or wear before each use. Repair or
replace damaged equipment immediately.
• Ensure all power sources conform to
equipment voltage requirements and are
disconnected before connecting or
disconnecting equipment.
• When wiring electrically powered
equipment, follow all electrical and safety
codes.
• Wherever possible, use a residual current
device (RCD).
• High voltage / high current power lines may
be present. Use extreme caution to avoid
contact or interference with power lines.
Electrical shock can be fatal.
General Electrical Safety
• Electrically grounded equipment must have
an approved cord and plug and be
connected to a grounded electrical outlet.
• Do NOT bypass the ON/OFF switch and
operate equipment by connecting and
disconnecting the electrical cord.
• Do NOT use equipment that has exposed
wiring, damaged switches, covers or
guards.
• Do NOT use electrical equipment in wet
conditions or in damp locations.
• Do NOT use electrical cords to lift, move or
carry equipment.
• Do NOT coil or knot electrical cords, and
ensure electrical cords are not trip hazards.
General Service Information
• The equipment must be serviced or
repaired at authorised service centres by
qualified personnel only.
• Replacement parts must be original
equipment manufacturer (OEM) to ensure
equipment safety is maintained.
• Do NOT attempt any maintenance or repair
work not described in this manual.
• After use, the equipment and components
may still be hot allow the equipment to –
cool and disconnect spark plugs and/or
electrical power sources and/or batteries
from it before , changing adjusting
accessories, or performing repair or
maintenance.
• Do NOT adjust while the equipment is
running.
• service- Perform related activities in suitable
conditions, such as a workshop.
• Replace worn, damaged or missing
warning/safety labels immediately.
Understand Your Machine
• Read this manual and labels affixed to the machine to understand its limitations and potential hazards.
• quickly. Be thoroughly familiar with the controls and their proper operation. Know how to stop the machine and disengage the controls
• Make sure to read and understand all the instructions and safety precautions as outlined in the Engine Manufacturer’s manual. Do not attempt to
operate the machine until you fully understand how to properly operate and maintain the engine and know how to avoid accidental injuries and/or
property damage.
• If the unit is to be used by someone other than original purchaser, or is to be loaned, rented, or sold, always provide this manual and any needed
safety training before operation. The user can prevent and is responsible for accidents or injuries that may occur to themsel to other people, ves,
or to property. Do not force the machine beyond its limits. Use the correct machine for your application.
Personal Safety
• Do not permit children to operate this machine at any time.
• Keep children, pets, and other people not using the unit away from the work area. Be alert and shut off the unit if anyone enters work area. Keep
children under the watchful care of a responsible adult.
• Do not operate the machine while under the influence of drugs, alcohol, or any medication that could affect your ability to use it properly.
• Dress properly: Wear long, heavy pants, work boots, and work gloves. Do not wear loose clothing, short pants, or jewellery of any kind. Secure
long hair so it is above shoulder level. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery, or long hair can be
caught in moving parts.
• Protect eyes, face, and head from objects that may be thrown from the unit. Always wear safety goggles or safety glasses with side shields when
operating.
• Wear appropriate hearing protection.
• Always keep hands and feet away from all moving parts during operation. Moving parts can cut or crush body parts.
• Always keep hands and feet away from all pinch points.
• Do not touch parts that might be hot from operation. Allow parts to cool before attempting to maintain, adjust, or service.
• Stay alert, watch what you are doing, and use common sense when operating the machine.
• Do not overreach. Do not operate the machine while barefoot or when wearing sandals or similar lightweight footwear. Wear protective footwear
that will protect your feet and improve your footing on slippery surfaces. Keep proper footing and balance at all times. This enables better control
of the machine in unexpected situations.
Inspect Your Machine
• Chec ightened.k your machine before starting it. Keep guards in place and in working order. Make sure all nuts, bolts, etc., are securely t
• Never operate the machine when it needs repair or is in poor mechanical condition. Replace damaged, missing, or failed parts before using it.
Check for fuel leaks. Keep the machine in safe working condition.
• Do not use the machine if the engine’s switch does not turn off the engine when running. Any gasoline powered machine that can’t be controlled
with the engine switch is dangerous and must be replaced.
• Regularly check to see that the keys and adjusting wrenches are removed from the machine area before starting it. A wrench or a key that is left
attached to a rotating part of the machine may result in personal injury.
• Avoid accidental starting. Be sure the engine’s switch is off before transporting the machine or performing any maintenance or service on the unit.
Transporting or performing maintenance or service on a machine with its switch on invites accidents.
• If the machine should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning
sign of trouble.


Produktspezifikationen

Marke: Baumr-AG
Kategorie: Nicht kategorisiert
Modell: BPR1000

Brauchst du Hilfe?

Wenn Sie Hilfe mit Baumr-AG BPR1000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Baumr-AG

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-