Barska AE11124 Bedienungsanleitung

Barska Teleskop AE11124

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Barska AE11124 (4 Seiten) in der Kategorie Teleskop. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
TELESCOPES
BARSKA® Optics, as manufacturer, warrants this new precision optical product to be
free of original defects in materials and/or workmanship for the length of time speciî‚¿ed
by this warranty. This warranty does not include damage caused by abuse, improper
handling, installation, maintenance, normal wear-and-tear, unauthorized repairs
or modiî‚¿cations and tampering in anyway. This warranty is limited to the original
purchaser and is not transferable.
This warranty applies only to products purchased in the United States of America and
Canada.
In the event of a defect within 30 days, the consumer must return the defective unit to
the BARSKA dealer (the place of purchase) at his/her own expense.
Beyond 30 days, BARSKA products should be sent to the following address for
warranty repairs. Products must be packed carefully and sturdily to prevent damage in
transit, and returned freight prepaid to:
BARSKA® OPTICS
1721 Wright Ave.
La Verne, CA 91750, USA
For additional and updated information
please visit our website at www.barska.com
Please email info@barska.com or call 1.888.666.6769 for Return Merchandise
Number (RMA#) before any returns. NOTE: All merchandise received without a valid
RMA # will be returned to shipper at his/her own expense.
Please include all of the following when returning BARSKA products for service and/or
replacement:
1. Please write your complete details (Name, Address, Telephone #, E-mail address,
RMA#, etc.)
2. Purchase receipt or Proof of Purchase. (Original/Copy)
3. A brief explanation of the defect.
4. A Check/Money Order of $25.00 cover inspection, shipping and handling.
*Please allow 6-8 weeks for delivery.
This product will either be replaced or repaired at the discretion of the warrantor. If it’s
a discontinued item, we will replace the product with an equivalent product. Should
the repair not be covered by this warranty, an estimate will be sent for your approval.
Non-warranty repairs or refurbishing of your optical products are always provided at a
reasonable cost.
BARSKA® shall not be liable for any consequential, incidental and/or contingent
damages whatsoever. We will not pay shipping, insurance or transportation charges
from you to us, or any import fees, duties and or taxes. This warranty supersedes all
previous BARSKA warranties.
12/12© 2012 BARSKA®
1 YEAR LIMITED WARRANTY
12/12 BC270w w w . b a r s k a . c o m
Setup Instructions
Unpack and lay out all of the parts in a large, clear area where you will have
room to assemble the pieces.
1. Fully extend the legs of the tripod apart
2. Under the plate of the tripod head is locking screw for the tripod head
3. Place the telescope tube on the mount so that the screw in the mounting
platform lines up with the holes in the telescope
4. Keep telescope in place by tightening the mounting plate adjustment
Initial set up is shown in the picture on the left. Should look like picture on the
right when î‚¿nished.
5. Remove caps from telescope
Note: When mounting the parts ensure that the securing screws are not tightened
too tightly. Tightening too tightly could result in damage the parts or the internal
thread of the holders.
w w w . b a r s k a . c o m
2
231 Power, 70060 Starwatcher Telescope 231 Power, 70060 Starwatcher Telescope
3
w w w . b a r s k a . c o m
1. Tripod Brace with Leg
Adjustment Screw 7. Eyepiece
2. Accessory Tray 8. Finderscope
3. Tripod Leg 9. Finderscope Bracket
4. Vertical Axis Handle 10. Telescope Main Body
5. Focus Knob Objective Lens11.
6. Rotating Diagonal 12. Horizontal Axis Knob
CAUTION: DO NOT LOOK DIRECTLY AT THE
SUN. VIEWING THE SUN OR ANY LIGHT
SOURCE WITH THIS OPTICAL DEVICE CAN
CAUSE PERMANENT EYE DAMAGE.
1
3
4
6
5
8
9
10
11
2
7
12
Attaching the Accessories
Accessory Tray
1. Included with the telescope is an accessory tray that is mounted in the center
and on the leg braces. If necessary fully extend the legs of the tripod apart.
Initial set up is shown in the picture on the left. Should look like picture on the
right when î‚¿nished.
Eyepiece
1. Select an eyepiece, place it into the rotating diagonal. Lock the eyepiece it into
place with the thumb screw.
Barlow Lens
The included 3x Barlow lens triples the magnifying power of each eyepiece.
See Barlow Lens page 7
Eyepiece initial set up is shown in the picture on the left. Should look like picture
on the right when î‚¿nished.
Finderscope
The mount of the î‚¿nderscope bracket slides into the main body of the telescope.
Located between the compass and the focus knob.
1. Unscrew the 3 silver thumbscrews located on the î‚¿nderscope bracket and
place the î‚¿nderscope through the opening of the î‚¿nderscope bracket. Tighten
the 3 silver thumbscrews to keep î‚¿nderscope in place.
2. Slide the î‚¿nderscope bracket into the body of the telescope, located between
the compass and the focus knob.
3. Remove cap from the eyepiece of the î‚¿nderscope.
4. If necessary adjust the thumb screw of î‚¿nderscope bracket to change the
angle of viewing for the î‚¿nderscope.
Initial set up is shown in the picture on the left. Should look like picture on the
right when î‚¿nished.
w w w . b a r s k a . c o m
4 5
w w w . b a r s k a . c o m
231 Power, 70060 Starwatcher Telescope 231 Power, 70060 Starwatcher Telescope


Produktspezifikationen

Marke: Barska
Kategorie: Teleskop
Modell: AE11124

Brauchst du Hilfe?

Wenn Sie Hilfe mit Barska AE11124 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten