B&B Electronics ADAM-4520I Bedienungsanleitung

B&B Electronics Nicht kategorisiert ADAM-4520I

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für B&B Electronics ADAM-4520I (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/5

1 Startup Manual

STARTUP MANUAL

ADAM-4510I Robust Isolated RS-422/485 Repeater

ADAM-4520I Robust Isolated RS-232 to RS-422/485 Converter

Before you begin installing your module, please

make sure that the following materials have been

shipped:

1 x ADAM-4510I or ADAM-4520I

1 x DIN-rail mounting bracket (attached)

1 x ADAM-4510I/4520I Startup Manual

1 x Panel mounting bracket

If any of these items are missing/damaged, contact

your distributor or sales representative immediately.

ADAM-4510I and ADAM-4520I developed by

Advantech Co., Ltd. has passed the CE and FCC test

for environmental specifications. The test conditions

for passing including the equipment being operated

within an industrial enclosure. Therefore, in order to

protect the ADAM module from being damaged by

ESD, we strongly recommend that the use of CE-

compliant industrial enclosure products.

Most industrial computer systems come with RS-

232 serial ports. Though widely accepted, RS-232

has limited transmission speed, range and network-

ing capabilities. RS-422 and RS-485 standards over-

come these limitations by using differential voltage

lines for data and control signals.

ADAM-4520I is isolated converter for systems orig-

inally equipped with RS-232. It transparently con-

verts RS-232 signals into isolated RS-422 or RS-

485 signals. You don't need to change your PC's

hardware or your software. The ADAM-4520I lets

you easily build an industrial grade, long distance

communication system with standard PC hardware.

The ADAM-4510I repeaters simply amplify, or

boost, existing RS-485 signals to enable them to

cover longer distances. They extend the communi-

cation distance by 4000 ft (1200 m) or extend the

number of connected nodes by 32.

Intelligent RS-485 Control

The RS-485 standard supports half-duplex commu-

nication. This means that just two wires are needed

to both transmit and receive data. Handshaking sig-

nals (such as RTS, Request to Send) are normally

used to control the direction of the data flow. A spe-

cial I/O circuit in ADAM-4510I and ADAM-4520I

automatically senses the direction of the data flow

and switches the transmission direction. No hand-

shaking signals are necessary. So you can build an

RS-485 network with just two wires. This RS-485

control is completely transparent to the user. Soft-

ware written for half-duplex RS-232 can work with-

out modification.

Isolation

ADAM-4510I and ADAM-4520I's opto-isolators

provide 3000 VDC isolation to protect the host com-

puter from ground loops and destructive voltage

spikes on the RS-485 data lines.

Surge Protection

ADAM-4510I and 4520I offer internal surge protec-

tion on their data lines. Internal high speed transient

suppressors on each data line protect the modules

from dangerous voltages levels or spikes.

Tough Industrial Design

You can power ADAM-4510I and ADAM-4520

with any unregulated power source between +10

and +48 VDC. Their industrial-grade plastic shells

can be mounted on a DIN-rail, panel or in a piggy-

backed stack. You make signal connections through

plug-in screw terminal blocks, guaranteeing easy

installation, maintenance and modification.

Packing List

CE/FCC Certification

Overview

Notes

For more information on this and other Advantech

products, please visit our websites at:

http://www.advantech.com

http://www.advantech.com/eAutomation

For technical support and service:

http://www.advantech.com.tw/eservice

This manual is for ADAM-4510I and ADAM-4520I.

Part No: 2003451010 (1st Ed) May 2006

Industrial Design

2 Startup Manual

• Automatic internal RS-485 bus supervision

• No external flow control signals required for RS-485

• Minimum 3000 VDC isolation

• Transient suppression on RS-485 data lines

• Baud rate up to 115.2 kbps

• Networking up to 4000 feet (1200 m)

• Reserved space for termination resistors

• Power and data flow indicator for troubleshooting

• Power requirement: +10 to +48 VDC

• Mounts easily on DIN-rail or panel

Common

• Power Requirement: Unregulated +10 to +48 VDC

with protection from power reversals

• Case: ABS+PC with captive mounting hardware

• Accessories (Supplied): DIN-rail Mounting Adapter,

Panel Mounting Bracket

• Plug-in Screw Terminal Wiring: Accepts AWG 1-

#12 to #22 (0.5 to 2.5 mm) wires

• Operating Temperature: -40 ~ 85° C (-40 ~ 185° F)

• Storage Temperature: -40 ~ 85° C (-40 ~ 185° F)

• Humidity: 5 ~ 95%, non-condensing

ADAM-4510I Specifications

• Baud Rate (bps): 1200, 2400, 4800, 9600, 19.2 k,

38.4 k, 57.6 k, 115.2 k and RS-422 (switchable)

• Isolation Voltage: 3000 VDC

• RS-422/RS-485 Interface Connector:

Plug-in screw terminal

• Power Consumption: 1.4 W

ADAM-4520I Specifications

• Baud Rate (bps): 1200, 2400, 4800, 9600, 19.2 k,

38.4 k, 57.6 k, 115.2 k, RTS control and RS-422

mode (switchable)

• Isolation Voltage: 3000 VDC

• RS-232 Interface Connector: Female DB-9

• RS-422/RS-485 Interface Connector:

Plug-in screw terminal

• Power Consumption: 1.2 W

Switch Description

DIP switches in the ADAM converter and repeater

modules set the data format (number of bits) and baud

rate for the ADAM network. You can configure the

other modules in the network via software commands.

Your program and the PC's serial port should match the

settings of the converter and repeater modules.

SW1

Switch 1 controls the data format. Data can be 9, 10, 11

or 12 bits. The factory default is 10 bits: one start bit,

eight data bits, no parity bit and one stop bit.

When using the converter in combination with other

ADAM modules, do not change the default setting as

ADAM modules have a fixed data format of ten data

bits. The option of changing to 9, 11 or 12 bits is for use

with other modules (other than ADAM modules) that

have different data formats. When you change the data

format, you will have to change the data format settings

on all the other modules in the network.

SW2

Switch 2 sets the baud rate. The options range from

1200 bps to 115.2 kbps. The factory default is 9600 bps.

Be aware that when you change the baud rate, you have

to change the baud rate for all the connected modules

accordingly. If the RS-422 mode is ON, the baud rate

doesn't need to be set.

SW3

Switch 3 sets the mode. When the mode is set “Nor-

mal”, the baud rate and data format will use SW1 and

SW2 setting. When the mode is set “Auto Baud Rate

with Noise Reduction”, the baud rate and data format

will be set automatically. This mode also help reduce

the noise.

Note: There is only one ADAM-4510I or ADAM-

4520I module can be set in “Auto Baud Rate with

Noise Reduction” mode in singe RS-485 network.

Data Format Settings (SW1)

Features

Specifications

Switch Settings

9 bits

10 bits

(default)

11 bits

12 bits

Startup Manual 3

Baud Rate Settings (SW2)

ADAM-4510I Repeater Module

ADAM-4520I RS-422/485 Converter Module

1200 bps

2400 bps

4800 bps

9600 bps

(default)

19.2 kbps

38.4 kbps

57.6 kbps

115.2 kbps

/Auto

Baud Rate

RS-422

RTS Control

1200 bps

2400 bps

4800 bps

9600 bps

(default)

19.2 kbps

38.4 kbps

57.6 kbps

115.2 kbps/

Auto Baud

Rate

RS-422

Produktspezifikationen

Marke:	B&B Electronics
Kategorie:	Nicht kategorisiert
Modell:	ADAM-4520I
Produktfarbe:	Blau
Betriebstemperatur:	-40 - 85 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Montage:	DIN-Schiene
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-40 - 85 °C
Energieverbrauch:	1200 mA
Unterstützt Windows-Betriebssysteme:	Ja
Eingangsspannung:	10 - 48 V
Hostschnittstelle:	RS-232
Anschluss 1:	DB-9
Anschluss 2:	Anschlussklemme
Ausgangsschnittstelle:	RS-422/485
Baudrate:	115.2 Kbit/s
Druckanstieg-Schutzspannung:	0.05 kV
Entkopplung:	3 kV