AXTON AXC25IX Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für AXTON AXC25IX (16 Seiten) in der Kategorie Autofreisprechanlage. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
EinbauanlEitung/installatiOn guiDE
COMPONENT
SYSTEMS
AXC26IX
AXC25IX
– 2 –
Thank you and congratulations on your purchase of this AXTON AXC 2-way component
system. This loudspeaker system exclusively uses very high quality parts and compon-
ents. As with all high-quality car audio components, professional installation is highly re-
commended. If you plan on installing this component system by yourself, please read the
following installation guide carefully, before you attempt the installation. You should retain
this manual, the packing and the purchasing receipt for future reference. For any further
information about mounting, connecting or adjusting this speaker system, please contact
your authorized AXTON dealer.
UNPACKING THE SYSTEM
Carefully remove the loudspeakers, crossovers and the accessories from the giftbox and
check whether all parts are in good undamaged condition, and match with the set
contents listed below:
n 2 AXC mid/woofers
n 2 grilles
n 2 AXC-T25 tweeters
n 2 inline crossovers with attached wires for tweeter and mid/woofer
n 1 set of tweeter & mid/woofer mounting hardware
n 1 instruction manual with warranty card
Please contact your authorized AXTON dealer if the content of this set is incomplete or
parts of it show signs of transport damage.
BEFORE YOU START
The rst step is to choose the most suitable or best sounding location for the speakers to
be installed. Keep in mind that the best looking spot might not be the one that gives you
best sound. The factory OEM speaker cutouts usually provide space and a stable platform
for fast and convenient mounting of new mid/woofer units. To use the OEM speaker
cutouts is highly advantageous in most cases and it will also prevent you from having to
cut new holes. For the tweeter mounting, some extra care to nd the best spots will
usually pay back in form of improved front staging or/and better resolution.
– 3 –
MOUNTING THE MID/WOOFERS
Remove the factory grilles of the door - or if necessary - the complete door panels. The
13 / 16.5 cm EURO-DIN frame mid/woofer units provide bolt and screw holes to t a great
variety of OEM standard patterns, making them ideal for a direct replacement of factory
installed speakers in European or Asian cars.
n Remove the factory installed mid/woofers or fullrange speakers. Before you attempt
to install the new AXTON mid/woofers, you must check the available installation depth
of the left and right front door. To do this, slide down both windows and hold the AXTON
mid/woofers in place to reassure the available installation depth does sufce. This test is
important, failure to do this may let you end up with an impaired window function!
n Look out for a good location to mount the crossovers. Consider that the x-overs should
remain accessible for tweeter level adjustment after the installation of the speakers is com-
pleted. Potential places to mount your x-overs are under the dashboard, inside the doors,
and so on.
n Connect the crossover wires to the blade connector terminals of the mid/woofer units.
n Check that there are no gaps between the speakers and the mounting surface in the
doors. Note that some (newer) cars will require the use of car-specic mounting adapters
made of pastic material. Without them, the Euro-DIN mid/woofers will not t to the OEM
cutout, or the available installation depth will not be sufcient. Such adapters are usually
available from your authorized AXTON dealer.
n The cone and surround material of the mid/woofers is 100% water proof. However a
direct exposure of the mid/woofer to water inside the doors should be avoided. In most
cases, protection foils are pre-installed to protect the OEM full-range speaker. Do not rip
this foil out of the doors, it is there for a purpose!
n Fix the mid/woofer to the speaker mounting hole using the provided screws. If the mid/
woofers are directly screwed onto the sheetmetal of the door, use the metal clips included
with the mounting hardware. You can now reinstall the factory plastic grilles, but make
sure the surrounds of the mid/woofers do not come in touch with plastic parts standing
off on the backside of the grilles.
n In case you have chosen a new location for your mid/woofers (other than factory
cut-out), use the speaker protection grilles. Just mount them on top of the mid/woofers.


Produktspezifikationen

Marke: AXTON
Kategorie: Autofreisprechanlage
Modell: AXC25IX

Brauchst du Hilfe?

Wenn Sie Hilfe mit AXTON AXC25IX benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Autofreisprechanlage AXTON

Bedienungsanleitung Autofreisprechanlage

Neueste Bedienungsanleitung für -Kategorien-