AVer M15W Bedienungsanleitung

Lesen Sie kostenlos die ๐Ÿ“– deutsche Bedienungsanleitung fรผr AVer M15W (5 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war fรผr 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
๎˜ƒ
M15W Instruction Manual
PACKAGE CONTENTS
The items below are included with this product. If any item is
missing, contact the dealer from whom you purchased this product.
M15W unit Power adapter/
Power plug USB cable
Instruction manual Wi-Fi Dongle
OPTIONAL ACCESSORIES ๎˜ƒ
๎˜ƒ
Carrying Bag Anti-glare Sheet
MORE HELP
For FAQs, technical support, software and instruction manual
download, please visit:
https://www.averusa.com/education/support/
HARDWARE PARTS
1
2
3
4
5 6 7 8
๎˜ƒ
1. Camera head 2. LED lighting
3. Arm 4. Control panel
5. Wi-Fi dongle 6. USB port
7. HDMI output 8. DC power jack
CONTROL PANEL
1
2
3
4 6 8
5 7 9
10
๎˜ƒ
1. Power indicator
2. Wi-Fi indicator
3. Battery indicator
4. Power button
(on/off/standby)
5. Freeze
6. Lamp(on/off)
7. Auto focus
8. Zoom in
9. Zoom out
10. Built-in MIC
LED INDICATOR
Power Solid green: Power on
No light: Power off
Solid red: Standby mode
Wi-Fi Solid blue: AP Mode Ready / STA connected
Slow flashing blue: Software connection
with camera
Short flashing blue: Create AP mode / STA
connecting
Solid green: Miracast mode ready
Slow flashing green: Miracast streaming
start
Quick flashing green: Miracast device scan /
connecting
Battery
Solid green(x3): Battery is full(100% ~ 60%)
Solid green(x2): Battery is 60% ~ 30%
Solid green(x1): Battery is 30% ~ 5%
Solid red (x1): Battery is 5% ~ 0%
Flashing red (x1): Battery is out of power
Solid orange(x3): Battery is abnormal
[Note]
1. The battery will be exhausted for long-term usage. Do not
replace the battery by yourself. Please contact your dealer.
2. To complete turn off camera,
๎˜ƒpress and long press the power
button.
COMPOUND KEY
Snapshot the current
screen image to software
or cloud.
๎˜ƒ
P/N: 300APW00-???
COMPOUND KEY (Cont.) ๎˜ƒ
Back to factory default settings.
Press to switch between following modes:
- Auto detects the best resolution(4K, 720P, 1080P)
- 1024x768 (If HDMI device support)
- 4K 60Hz (If HDMI device support)
Press to switch between following modes:
- Normal: Adjust the gradient of image.
- Motion: Increase frame rate.
Sufficient lighting is required
when using this mode.
- High quality: Better image quality.
๎˜ƒ
DEVICE CONNECTION
๎˜ƒ
P2P connection via Wi-Fi Dongle
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
๎˜ƒ
Connect M15W to laptop and HDMI display.
๎˜ƒ
[Note]
๏ฎ The Wi-Fi mode is on when the camera is powered up.
๏ฎ When camera connects to a laptop through the USB port,
the Wi-Fi mode is disabled. Please follow the direction on
HDMI device.๎˜ƒ
1
Plug in power adapter and turn on M15W.
๎˜ƒ ๎˜ƒ
[Note]
๏ฎ Please fully charge the camera for the first time use.
๏ฎ When the camera is power on, the camera is in โ€œStandbyโ€
mode. In standby mode, it can be charging with the USB
connection between other devices; but the power supply is
required 5V2A and the charging time will be longer.
๏ฎ The laptop, projector, or monitor provide the power cannot
through the USB connection to the camera while the camera
is operating.
๏ฎ When the camera is charging with the wall outlet, the battery
indicator is in green flashing.
๏ฎ Press + when the camera doesn't work
properly. The camera back to standby mode.
๎˜ƒ
2
๎˜ƒ
1 Plug-in the WiFi dongle to PC/laptop and Install the
AVerTouch application.
AVerTouch
Wi-Fi Dongle Laptop
๎˜ƒ
2 Open AVerTouch application, click to
connect the camera.
[Note] Check serial number at bottom of the camera to
find your camera.๎˜ƒ
3 Click Next to continue.
๎˜ƒ
4 Entering the Camera Name and Passcode, click Done
to continue.
๎˜ƒ
5 Click Done button to connect camera.
๎˜ƒ
[Note] It takes about 60 seconds to complete connection.๎˜ƒ
6 Select X can exit the live view page.
๎˜ƒ
[Note] When connecting is successful, you should see
the live view of the camera.
Wi-Fi Connection
MIRACAST CONNECTION
Select to make a connection with camera.
๎˜ƒ
1 Power on the camera.
Check the Wi-Fi status โ€“ Blue light on.
๎˜ƒ
๎˜ƒ
2 Open AVerTouch and follow on-screen instruction to
enable Wi-Fi function on camera.
[Note]
๏ฎ The software will auto detect the camera on your
network.
๏ฎ Select the camera that you want to connect with it.
๏ฎ The camera name will be โ€œAVer โ€˜model nameโ€™ - WiFi
dongle Mac addressโ€. The Mac address will be different
from the device.
3
Select to switch to camera live screen.
๎˜ƒ
4
2 Select Wireless > Mode > Miracast to enable Miracast
mode.
3 Select Miracast > display device.
[Note]
๏ฎ The detected display devices will be list out.
๏ฎ Press back to the menu.
๏ฎ The camera image will display on the display deviceโ€™s
screen after connecting.
๎˜ƒ
1 Press ๎˜ƒto enter selection menu.
[Note]
๏ฎ Using and button to go to the selection
and press ๎˜ƒbutton to confirm the selection.
๏ฎ Make sure M15W and display device (such as an
Interactive flat panel) are on same Wi-Fi network and
Wi-Fi is connected.
๏ฎ A commercial Miracast Dongle (Wireless Adapter) is
required for the display device.
๎˜ƒ

Produktspezifikationen

Marke: AVer
Kategorie: niet gecategoriseerd
Modell: M15W

Brauchst du Hilfe?

Wenn Sie Hilfe mit AVer M15W benรถtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung niet gecategoriseerd AVer

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung fรผr -Kategorien-