Aurora AS800CD Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Aurora AS800CD (2 Seiten) in der Kategorie Aktenvernichter. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Problem 2 The shredder will not stop working
The shredder is designed to operate for a couple of seconds after paper has cleared the
machine this is normal and helps clear paper through the cutting heads.
If the shredder continues to work after a shredding cycle and does not stop then this is
either;
1. The waste bin is full. You should empty the b or compact the shredded paper. in
2. Some paper is blocking the auto sensor, try clearing it by reversing and then returning
the switch to auto or by shredding some more paper.
3. Glue from envelopes or label’s is making the sensor lever stick. You should not shred
gummed envelopes or sticky labels, try cleaning and lubricating the shredder with Aurora
SP1000 Lubrication and sharpening sheets, see above.
Problem 3 The shredder has jammed whilst shredding
Empty the waste bin and try reversing the unit to clear the jam.
If this does not work disconnect power, trim off paper above and below the jam,
reconnect power and try alternating between reverse and auto until the jam clears.
If at any point the shredder stops working during this process it has probably over heated
and will need to cool down for 60 minutes.
Please be careful not to exceed the maximum paper capacity and feed the paper in
straight, please be aware damage caused to the shredder by inserting too much paper or
by failing to shred using a straight paper path is classed as misuse and invalidates your
warranty.
Never attempt to clear paper jams by inserting implements into the shredder or by
opening the unit.
Warranty
Your Aurora shredder comes with a 12 months return to base warranty, please contact
your supplier for further details.
Aurora warrants all parts of the machine to be free from defects in materials and
workmanship for a period of 1 year from the date of the purchase by the original
consumer. If the shredder is found to be defective during the warranty period the sole
and exclusive remedy will be the repair or replacement at Aurora’s option and expense.
Aurora Electronics (UK) Ltd disclaims any liability for incidental or consequential
damages attributable to the product. The liability of Aurora Electronics (UK) Ltd is limited
to the cost of the repair/replacement of the unit under warranty.
The warranty shall be immediately invalidated if unauthorized repairs or modifications are
made, if the machine has been abused or mishandled, if the product has been re-sold, or
if the product has not been operated in accordance with the instructions contained in this
document.
The warranty is in addition to and does not diminish the consumer’s statutory or legal
rights.
Aurora Electronics (UK) Ltd
Email: sales@aurora-ltd.co.uk
www.aurora-ltd.co.uk
IMPORTANT
Please ensure the shredder head is placed on the bin correctly. The safety cut out will prevent the
shredder from operating if the bin is the wrong way around or is not placed correctly on the waste bin.
Ensure the viewing window of the waste bin faces forward and the shredder head is placed on the bin
as shown in figure 1.
The safety cut out is on the back of the shredder, the semi circular recess on the waste bin must slot
inside the semicircular shape on the back of the shredder head to deactivate the safety cut out.
Please ensure the semicircular recess on the bin is not outside the shredder head or that the shredder
head is not resting on top of the semicircular recess on the bin. When correctly fitted there should be
no gap between the shredder head and the waste bin, and the fitting should be flush all around the
shredder.
User Manual for the AS800CD Aurora Shredder
IMPORTANT!
READ ALL INSTRUCTIONS BEFORE USING
Thank you for purchasing the AS800CD Paper Shredder. This product is designed to
shred paper and small staples it will also accept small paper clips, credit cards and
CD/DVD’s. It does not shred adhesive labels, self-seal envelopes, transparencies,
fabrics, glossy paper, newspaper, plastic (other than credit cards), cardboard or
continuous forms. Please note that using it for these purposes is likely to cause
damage and will invalidate your warranty. This paper shredder is not designed to shred
large volumes so please refer to the recommended usage capacity quoted below. You
may find paper particles in the bin when first opening the shredder this is a result of QC
testing procedures.
Recommended Daily Usage = 50 passes per day. (2 minutes on/ 30 minutes off)
Safety Instructions
1. Before use inspect the shredder, mains cable and plug for damage or defects.
2. Locate the shredder away from heat and water sources.
3. Ensure the switch is set to ‘off’ before connecting to the mains.
4. Always keep ties, loose clothing, jewelry and long hair away from the shredder.
5. Keep children and pets away from the shredder.
6. Disconnect from the mains when not in use or when emptying or cleaning.
7. Do not insert fingers or objects into the shredder at any time.
8. Never attempt to dismantle the shredder for any reason, please return to an
authorized service agent for repair or servicing.
9. Never dispose of flammable chemicals or materials that have come into contact with
flammable chemicals (For example nail polish, acetone and petroleum) in the shredder
b . Never use flammable oils, petroleum based products or flammable aerosols of any in
kind in the vicinity of the machine including compressed air dusters.
Operational Instructions
1. Remove all packaging.
2. Place the shredder head onto the waste bin ensuring the viewing window of the
waste bin faces forwards. IMPORTANT There is a safety cut out on the shredder
head to prevent operation when not safely located on the waste bin, the
shredder will not operate unless placed correctly on the waste bin. The shredder
will only operate with the waste bin provided.
3. Set the switch to ‘Auto’ so the shredder is in standby mode.
4. The shredder will start automatically when paper is fed into the paper entry slot.
5. Ensure paper is fed in using a straight paper path, avoid feeding paper at an angle
as this will cause the paper to curl and fold as it enters the shredder, multiplying the
number of sheets passing through the blades and is likely to result in a jam.
6. Do not enter more sheets of paper than stated on the shredder at one time. Sheet
capacity is based on a paper thickness of 75gsm. Thicker paper will reduce the amount
of sheets the shredder can shred in one go, as will the presence of staples or
paperclips.
7. Do not operate continuously for more than 2 minutes.
8. Prolonged shredding will cause the unit to overheat and shut down. This is not a
fault and indicates the unit has reached its maximum temperature tolerance, turn the
unit oat the mains and allow it to cool down for 60 minutes before resuming normal
operation.
9. If the amount of paper inserted is too much or is not fed in straight then the
shredding speed will slow or even stop. If this happens stop shredding
and use the reverse function to clear the jam. Always ensure the waste b is not full in
before reversing.
10. To shred a credit card Insert the credit card into the centre of the entry slot on the
shredder. You should only shred one credit card at a time. To destroy a CD Lift up the
clear plastic cover on the separate slot which is marked Maximum 1 CD’ and insert the
CD; the CD will be strip cut into several pieces. You should only destroy one CD at a
time.
Maintenance
1. Empty the waste bin frequently.
2. Reversing the shredder often helps to clear a buildup of paper dust and particles,
ensure the bin is not full before reversing
FAQ & Troubleshooting
If you experience problems with your shredder please try some of the solutions below,
under no circumstance should you attempt to open the shredder unit, this will expose you
to a risk of electric shock and will invalidate your warranty.
Problem 1 The shredder fails to operate
Is the shredder connected at the mains and is the power turned on?
Is the shredder switch set to ‘auto’?
Is the waste bin the right way around, make sure the viewing window on the waste bin
faces forwards?
Is the shredder located correctly on top of the waste bin? (The safety cut out is on the
back of the shredder, the semi circular recess on the waste bin must slot inside the
semicircular shape on the back of the shredder head to deactivate the safety cut out.
Please ensure the semicircular recess on the bin is not outside the shredder head or that
the shredder head is not resting on top of the semicircular recess on the bin. When
correctly fitted there should be no gap between the shredder head and the waste bin,
and the fitting should be flush all around the shredder - Press down firmly on the
shredder head to ensure it is in the correct position)
Has the shredder over heated? (Turn off at the mains and leave to cool down for 60
minutes then try again.)
Has the shredder blown a fuse? (Turn off at the mains and try replacing the fuse in the
mains plug.)
3. It is not essential to oil an Aurora shredder
however regular lubrication will extend the
life of your shredder, prevent an increase in
noise and help to keep the shredder in
optimum working condition. We recommend
using the ‘Aurora SP1000 Shredder
Lubrication and Sharpening sheets’ at
least once a month to keep your shredder
blades lubricated and free from a buildup of
paper dust. The Aurora SP1000 sheets
also contain a special grinding powder
that will keep your shredder blades sharp.
These are available from your supplier in
packs of 12.


Produktspezifikationen

Marke: Aurora
Kategorie: Aktenvernichter
Modell: AS800CD

Brauchst du Hilfe?

Wenn Sie Hilfe mit Aurora AS800CD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Aktenvernichter Aurora

Bedienungsanleitung Aktenvernichter

Neueste Bedienungsanleitung für -Kategorien-