Aurora AS610C Bedienungsanleitung

Aurora Aktenvernichter AS610C

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Aurora AS610C (3 Seiten) in der Kategorie Aktenvernichter. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

Warranty

Your Aurora shredder comes with a 12 months return to base warranty, please contact your supplier

for further details.

Aurora warrants all parts of the machine to be free from defects in materials and workmanship for a

period of 1 year from the date of the purchase by the original consumer. If the shredder is found to

be defective d ing the warranty period the sole and exclusive remedy will be the repair or ur

replacement at Aurora’s option and expense.

Aurora Electronics (UK) Ltd disclaims any liability for incidental or consequential damages

attributable to the product. The liability of Aurora Electronics (UK) Ltd is limited to the cost of the

repair/replacement of the unit under warranty.

The warranty shall be immediately invalidated if unauthorized repairs or modiﬁcations are made, if

the machine has been abused or mishandled, if the product has been re-sold, or if the product has

not been operated in accordance with the instructions contained in this document.

The warranty is in addition to and does not diminish the consumer’s statutory or legal rights.

Aurora Electronics (UK) Ltd.

Units 1 & 2, Shires Industrial Estate,

Essington Close,

Lichﬁeld,

Staﬀordshire.

WS14 9AZ

Email: sales@aurora-ltd.co.uk

www.aurora-ltd.co.uk

■

■■ Maintenance

1 Empty the waste bin frequently. .

2. Reversing the shredder often helps to clear a buildup of paper dust and particles, always ensure the

waste bin is not full before reversing.

■

■■ FAQ & Troubleshooting

If you experience problems with your shredder please try some of the solutions below nder no . U

circumstance should you attempt to open the shredder unit, this will expose you to a risk of electric

shock and will invalidate your warranty.

● Problem 1-The shredder fails to operate

Is the shredder connected at the mains and is the power turned on?

Is the shredder switch set to auto ? ‘ ’

Is the shredder located correctly on top of the b ? (Press down ﬁrmly on the shredder head to ensure in

it is in the correct position).

Is enough paper being inserted into the machine?-(Very thin or damp paper will cause the auto switch

to not operate).

Has the shredder over heated? (Turn oﬀ at the mains and leave to cool down for 60 minutes then try

again).

Has the shredder blown a fuse? (Turn oﬀ at the mains and try replacing the fuse in the mains plug).

● Problem 2-The shredder will not stop working

The shredder is designed operate for a couple of seconds after paper has cleared the machine this is to

normal and helps clear paper through the cutting heads.

If the shredder continues to work after a shredding cycle and does not stop then this is either;

1. The waste b is full. You should empty the b or compact the shredded paper. in in

2. Some paper is blocking the auto sensor, try clearing it by reversing and then returning the

switch to auto or by shredding some more paper. Always ensure the waste bin is not full

before reversing.

3. Glue from envelopes or label s is making the sensor lever stick. You should not shred ’

gummed envelopes or sticky labels, try cleaning and lubricating the shredder with Aurora

SP1000 Lubrication and sharpening sheets, see above.

●

●● Problem 3-The shredder has jammed whilst shredding

Empty the waste bin and try reversing the unit to clear the jam.

If this does not work disconnect power, trim oﬀ paper above and below the jam, reconnect

power and try alternating between reverse and auto until the jam clears.

If at any point the shredder stops working during this process it has probably over heated and

will need to cool down for 60 minutes.

Please be careful not to exceed the maximum paper capacity and feed the paper in straight,

please be aware damage caused to the shredder by inserting too much paper or by failing to shred

using a straight paper path is classed as misuse and invalidates your warranty.

Never attempt to clear paper jams by inserting implements into the shredder or by opening

the unit.

User Manual for the AS610C Aurora Shredder

IMPORTANT!

READ ALL INSTRUCTIONS BEFORE USE

Thank you for purchasing the AS610C Paper Shredder. This product is designed to shred paper and

small staples it will also accept small paper clips and credit cards. It does not shred adhesive labels,

self-seal envelopes, transparencies, fabrics, glossy paper, newspaper, plastic (other than credit cards),

cardboard or continuous forms. Please note that using it for these purposes is likely to cause damage

and will invalidate your warranty. This paper shredder is not designed to shred large volumes so

please refer to the recommended usage capacity quoted below. You may ﬁnd paper particles in the bin

when ﬁrst opening the shredder this is a result of QC testing procedures.

Recommended Daily Usage = 25 passes per day. (2 minutes on/20 minutes oﬀ)

■

■■ Safety Instructions

1. Before use inspect the shredder, mains cable and plug for damage or defects.

2. Locate the shredder away from heat and water sources.

3. Ensure the switch is set to oﬀ before connecting to the mains. ‘ ’

4. Always keep ties, loose clothing, jewelry and long hair away from the shredder.

5. Keep children and pets away from the shredder.

6. Disconnect from the mains when not in use or when emptying or cleaning.

7. Do not insert ﬁngers or objects into the shredder at any time.

8. Never attempt to dismantle the shredder for any reason, please return to an authorized

service agent for repair or servicing.

9. Never dispose of ﬂammable chemicals or materials that have come into contact with

ﬂammable chemicals (for example nail polish, acetone and petroleum) in the shredder bin.

Never use ﬂammable oils, petroleum based products or ﬂammable aerosols of any kind in

the vicinity of the machine including compressed air dusters.

■

■■ Operational Instructions

1. Remove all packaging and install the shredder unit on top of the waste bin ensuring it

locates ﬁrmly in position. There is a safety cut out on the shredder head to prevent

operation when not safely located on the waste bin, the shredder will not operate unless

placed correctly on the waste bin. The shredder will only operate with the waste bin

provided.

2. Please slide the switch to Auto the shredder is now in standby mode. “ ”,

3. The shredder will start automatically when paper is fed into the paper entry slot.

4. Ensure paper is fed in using a straight paper path, avoid feeding paper at an angle as this

will cause the paper to curl and fold as it enters the shredder, multiplying the number of

sheets passing through the blades and is likely to result in a jam.

5. Do not enter more sheets paper than stated on the shredder at one time. Sheet capacity is of

based on a paper thickness of 75 gsm. Thicker paper will reduce the amount of sheets the

shredder can shred in one go, as will the presence of staples or paperclips.

6. Do not operate continuously for more than 2 minutes.

7. Prolonged shredding will cause the unit to overheat and shut down. This is not a fault and

indicates the unit has reached its maximum temperature tolerance, turn the unit oﬀ at the

mains and allow it to cool down for 60 minutes before resuming normal operati on.

8. If the amount of paper inserted is too much or is not fed in straight then the shredding speed

will slow or even stop. If this stop shredding and use the reverse function to clear happens

the jam. Always ensure the waste b is not full before reversingin .

9. To shred a credit card insert the credit card in to the cent of the paper entry slot. You re

should only shred one credit card at a time. The shredder is designed for the occasional

shredding of credit cards.

3. It is not essential to oil an Aurora shredder

however regular lubrication will extend the life of

your shredder, prevent an increase in noise and

help to keep the shredder in optimum working

condition. We recommend using the ‘Aurora

SP1000 Shredder Lubrication and Sharpening

sheets’ at least once a month to keep your

shredder blades lubricated and free from a

buildup of paper dust. The Aurora SP1000

sheets also contain a special grinding powder

that will keep your shredder blades sharp.

These are available from your supplier in packs

of 12.

Produktspezifikationen

Marke:	Aurora
Kategorie:	Aktenvernichter
Modell:	AS610C
Gewicht:	3700 g
Produktfarbe:	Schwarz, Silber
Verpackungsbreite:	315 mm
Verpackungstiefe:	170 mm
Verpackungshöhe:	355 mm
Geräuschpegel:	70 dB
Energiebedarf:	AC
Abmessungen (BxTxH):	325 x 184 x 361 mm
Überhitzungsschutz:	Ja
Verpackungsabmessungen (BxTxH):	315 x 170 x 355 mm
Rücklauf:	Ja
Arbeitsbreite:	220 mm
Aktenvernichter Typ:	Kreuzschreddern
Aktenvernichter Größe:	4 x 47 mm
Aktenvernichter Kapazität:	6 Blätter
Aktenvernichter Geschwindigkeit:	3000 mm/min
Aktenvernichter - CDs:	Nein
Papierschredder:	Ja
Kreditkartenschredder:	Ja
Arbeitszyklus:	2 min
Automatisch an/aus Kontrolle:	Nein
Aktenvernichter - Heftklammern:	Ja
Aktenvernichter - Papierklammern:	Ja
Autostop bei Papierstau:	Nein
Sicherheitsstufe (Papier):	3