AudioControl ACX-300.2 Bedienungsanleitung

AudioControl Empfänger ACX-300.2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für AudioControl ACX-300.2 (12 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/12
COMPACT HIGH POWER ALL-WEATHER 2-CHANNEL AMPLIFIER
ACX-300.2
Quick Start Guide
Features
• Compact High Power 2-Channel Amplier
• High Current Design
• 2 x 75 Watts @ 4 Ohms
• 2 x 150 Watts @ 2 Ohms
• 1 x 300 Watts @ 4 Ohms, Bridged Mono
• 12 dB/Octave Linkwitz-Riley Alignment Crossover
• GTO™ Signal Sense (Great Turn On)
• 2 Speaker-level / Line-level RCA Inputs
• All-weather IPX6 rated!
• Filled with home-grown audio goodness
2
ACX-300.2
Quick Start Guide
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as muers, silencers, exhaust
pipes, or other apparatus (including ampliers) that produce heat.
9. WARNING: Improper installation may lead to permanent injury or death.
Installation of the apparatus must be done with great care by qualied
personnel, to prevent damage to fuel lines, power and other electrical
wiring, hydraulic brake lines, and other systems, that might compromise
vehicle safety.
10. Provide +12V and Ground wiring of sucient size to ensure adequate
current to the amplier. For the ACX-300.2 this means 8 gauge wire or
thicker.
11. Use rubber grommets to protect wiring whenever passing wires through
metal openings or bulkheads.
12. Only use attachments/accessories specied by the manufacturer.
13. Refer all servicing to qualied service personnel. Servicing is required
when the apparatus has been damaged in any way, such as the power
input terminals are damaged or objects have fallen into the apparatus,
does not operate normally, or has been dropped.
14. Fuses shall be replaced only with the correct type and fuse value, and
only when the apparatus is powered o.
15. Exposure to high sound pressure levels may lead to permanent hearing
loss. Take every precaution to protect your hearing.
The lightning ash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure, that may be of
sucient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user of the presence of important operating and mainte-
nance (servicing) instructions in the literature accompanying the
appliance.
Caution: to reduce the risk of electric shock, do
not disassemble the apparatus, other than to
remove the top panel to access the controls.
There are no user-serviceable parts inside.
Refer servicing to qualied personnel.
Recycling notice: If the time comes and this apparatus has fullled
its destiny, do not throw it out into the trash. It has to be carefully
recycled for the good of mankind, by a facility specially equipped
for the safe recycling of electronic apparatii. Please contact your
local or state recycling leaders for assistance in locating a suitable
nearby recycling facility. Or, contact us and we might be able to
repair it for you.
Important Safety Instructions
3
1. Speaker Outputs –
In Stereo operation, connect one loudspeaker to each channel.
The minimum impedance is 2 Ohms per channel.
, connect one loudspeaker to the In Bridged Mono operation
outer 2 wires - White(+) and Grey/Black(-). The mono loudspeaker
will be powered by each channel, and both input channels must
be fed a signal. The minimum impedance is 4 Ohms.
2. Power Input Terminal +12V & Ground – Connect these wires
to the +12V and Negative binding posts of the vehicle battery
via one of two included harness options. You may use either the
included water resistant harness, or the included harness kit to
terminate your own custom-length water-resistant harness. Use
quality insulated wiring of the recommended wire gauge, such as
wire gauge 8 or thicker.
1 2 3
Connections & Control Panel Features

Produktspezifikationen

Marke: AudioControl
Kategorie: Empfänger
Modell: ACX-300.2

Brauchst du Hilfe?

Wenn Sie Hilfe mit AudioControl ACX-300.2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Empfänger AudioControl

AudioControl

AudioControl A800.1 Bedienungsanleitung

6 September 2024
AudioControl

AudioControl A600.4 Bedienungsanleitung

6 September 2024
AudioControl

AudioControl A1100.5 Bedienungsanleitung

6 September 2024
AudioControl

AudioControl A1500.1 Bedienungsanleitung

6 September 2024
AudioControl

AudioControl CM3-750D Bedienungsanleitung

4 September 2024
AudioControl

AudioControl CM2-750D Bedienungsanleitung

4 September 2024
AudioControl

AudioControl CM4-750 Bedienungsanleitung

4 September 2024
AudioControl

AudioControl CM3-750 Bedienungsanleitung

4 September 2024
AudioControl

AudioControl CM2-750 Bedienungsanleitung

4 September 2024
AudioControl

AudioControl ACX-300.2 Bedienungsanleitung

29 August 2024

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024
Denon

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024
Pro-Ject

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024
AKG

AKG HP12U Bedienungsanleitung

15 Oktober 2024
Sennheiser

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024
Yamaha

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024
JL Audio

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024
Pioneer

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024
Technics

Technics SA-160L Bedienungsanleitung

8 Oktober 2024
Avantree

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024