Audio Pro ACE-BASS 3 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Audio Pro ACE-BASS 3 (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
1) Line in from amplifier
(Line IN Left and Right)
2) Low level input from amplifier
(LFE)
3) Speaker Level output
(to speakers)
4) Mains switch
10) Display
11) + button
12) - button
13) Mode button
14) ON/OFF indicator
15) Remote sensor
WARNING !
To reduce the risk of electric shock, do not open or remove cover or back. Do not expose this appliance to rain or moisture. In case
of malfunction consult qualified service personel.
The exclamation point, within an equilateral triangle, is intended to alert
the user of the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
The lightning flash with arrowhead, within an equilateral
triangle, is intended to alert the user of the presence of
uninsulated "dangerous voltage" within the product´s
enclosure; that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
5) Speaker Level input
(from amplifier)
6) Mains cord (230V)
7) Fuse
(placed under)
8) Standby switch
9) Memory button
English
CONTROLS AND INDICATORS
6
8
9
11
12
13
14 15
1
2
3
4
5
6
7
10
English
2.2 To Speaker terminal (High level)
Connect speaker cables from the speaker terminals of your amplifier to the Speaker Level input on the subwoofer.
Carefully check the polarity of the cables (+ to + and - to -). Connect both Left and Right channels. The speakers
are connected to SPEAKER OUTPUT on the subwoofer. Again, carefully check the polarity (+ to + etc).
In this installation, the speaker signal is by-passed throught the subwoofer amplifier. You can adjust the subwoofer
performance using the ASP functions.
You can also connect with parallel speaker wires from your amplifier. One pair wires to the speakers and one pair
wires to the subwoofer.
INSTRUCTIONS
Congratulations to your choice of Audio Pro subwoofer and to a new sound experience.
Audio Pro subwoofer is a unique product built with advanced technique. It is very easy to handle and install. It is
equipped with the unique Audio Pro ace-bass technique combined with the built-in amplifier, the ASP (Analogue
Signal Processor), the long throw woofers and the extremely solid cabinet offers a natural and deep bass reproduction
at sound levels you never thought existed.
The Audio Pro subwoofer offers extraordinary performance and lots of possibilities. In order to get the most out of
your new subwoofer, we recommend you to spend time and carefully read these instructions before you connect and
start up your system. Also refer to the separate ASP manual.
What is ace-bass ?
Normally, speaker design is bound to follow the laws of physics. The consequence will be, to get deep bass, the
speakerbox must be very large. With the ace-bass technique we can "change" the laws of physics in the way that the
driver believes it is placed in a much larger speaker box.
Furthermore, the ace-bass technology improves the driver performance. With the ace-bass technique, we can design
smaller subwoofers with deeper and cleaner bass.
2.1 To an amplifier / pre-amplifier with Subwoofer out terminal.
Connect the enclosed cord from the subwoofer-output of your home cinema amplifier to LFE IN on the
subwoofer. When the LFE input is used, the built in ASP module in the subwoofer is bypassed. Note that the
ASP functions are not available with this connection. You can also connect to Line IN. (Then use the enclosed
Y adaptor). In this case the ASP module is in use and all ASP adjustments can be made. You can adjust
several parameters using the ASP.
Note: If you connect by LFE, the ASP functions are not available.
1. UNPACKING
Carefully unpack the Audio Pro subwoofer and check for any damages. If possible, keep the cartonbox if future
transportation is needed.
You should immediately contact your dealer if the subwoofer is damaged .
7
2. INSTALLATION
There are different methods to connect your subwoofer to a HiFi / Home Theater system. In the following we
explain different ways. NOTE! Do not connect the mains cord until all other installation is completed.


Produktspezifikationen

Marke: Audio Pro
Kategorie: Nicht kategorisiert
Modell: ACE-BASS 3

Brauchst du Hilfe?

Wenn Sie Hilfe mit Audio Pro ACE-BASS 3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Audio Pro

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-