Atlona AT-OME-EX-WP-KIT Bedienungsanleitung

Atlona Audio/Video-Konverter AT-OME-EX-WP-KIT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Atlona AT-OME-EX-WP-KIT (12 Seiten) in der Kategorie Audio/Video-Konverter. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

Installation Guide

AT-OME-EX-TX-WP-E

Omega™ 4K/UHD

Wallplate Transmitter for HDMI with HDBaseT Output and

USB

AT-OME-EX-TX-WP-E

The Atlona AT-OME-EX-TX-WP-E is an HDBaseT transmitter for video up to 4K/60 4:2:0, plus

embedded audio, control, and USB over distances up to 330 feet (100 meters). It is designed

for commercial installations in Europe, and includes interchangeable EU and UK faceplates and

brackets. Part of the Omega™ Series of integration products for modern AV communications

and collaboration, the OME-EX-TX-WP-E is HDCP 2.2 compliant and transmits RS-232 control

signals. With a matching HDBaseT receiver, the integrated USB extension addresses the

challenge of connecting between USB devices at remote locations, and is ideal for software

video conferencing and touch or interactive displays. The OME-EX-TX-WP-E includes a USB

2.0 host interface for a PC, plus two peripheral devices such as a speakerphone, microphone,

or keyboard and mouse. This transmitter is ideal for use with Omega Series receivers as well as

switchers with HDBaseT inputs.

* The AT-OME-EX-TX-WP-E is not compatible with the AT-UHD-HDVS-300 system for extending

USB.

IMPORTANT: Visit http://www.atlona.com/product/AT-OME-EX-TX-WP-E for

the latest rmware updates and User Manual.

1 x AT-OME-EX-TX-WP-E

1 x White EU wallplate

1 x White UK wallplate

1 x 3-pin captive screw connector

2 x Mounting screws

1 x Installation guide

Package Contents

Installation Guide

AT-OME-EX-TX-WP-E

OMEGA T M AT-OME-EX-TX-WP-EU

HDMI HUB

LINK

PWR

HOST

6 7

RS-232

RX T X

HDBaseT OUT

1 HOST

Connect a USB cable from the computer

to this port.

2 PWR

This LED indicator glows solid green

when the unit is powered. Refer to

LED Indicators (page 6) for more

information.

3 LINK

This LED indicator glows solid amber to

indicate that the HDBaseT signal integrity

is good. Refer to LED Indicators (page

6) for more information.

4 HDMI

Connect an HDMI cable from this port to a

UHD/HD source.

5 HUB

Connect up to two USB devices, such as

a speakerphone and keyboard, to these

ports.

6 RS-232

Connect an RS-232 control system to this

port. Connect the included 3-pin captive

screw block to this receptacle. Refer to

RS-232 (page 3) for more information.

7 HDBaseT OUT

Connect a category cable from this port to

the port of the AT-OME-EX-HDBaseT IN

RX or other PoE-compatible receiver.

NOTE: Note that the AT-OME-EX-TX-WP-EU and AT-OME-EX-TX-WP-UK are

functionally identical, except for the size of the wallplate. The AT-OME-EX-TX-

WP-EU is shown above.

Installation Guide

AT-OME-EX-TX-WP-E

1. Use wire strippers to remove a portion of the RS-232 cable jacket.

2. Remove at least 3/16” (5 mm) from the insulation of the RX, TX, and GND wires.

3. Insert the TX, RX, and GND wires into correct terminal using the included 3-pin captive

screw connector.

4. Connect the opposite end of the cable to the control system.

NOTE: Typical DE-9 connectors use pin 2 for TX, pin 3 for RX, and pin 5 for

ground. On some devices functions of pins 2 and 3 are reversed.

RS-232

GND

DE-9 (RS-232) port

The AT-OME-EX-TX-WP-E provides an port which allows communication between a RS-232

control system and an RS-232 device. This step is optional.

RS-232

RX TX

HDBaseT OUT

RS-232 port on back of unit

Produktspezifikationen

Marke:	Atlona
Kategorie:	Audio/Video-Konverter
Modell:	AT-OME-EX-WP-KIT
Unterstützte Audioformate:	LPCM, PCM
Breite:	45.8 mm
Tiefe:	67 mm
Gewicht:	180 g
Produktfarbe:	Black, White
Übertragungstechnik:	Kabelgebunden
Höhe:	103.5 mm
Energiequelle:	USB
Betriebstemperatur:	0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	20 - 90 %
Stromverbrauch (Standardbetrieb):	11.18 W
Typ:	AV-Sender & -Empfänger
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-20 - 60 °C
HDCP:	Ja
Unterstützte Video-Modi:	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Unterstützte Grafik-Auflösungen:	2048 x 1080,3840 x 2160,4096 x 2160
USB-Stecker:	USB Type-A, USB Type-B
Anzahl der USB-Anschlüsse:	2
Maximale Auflösung:	4096 x 2160 Pixel
HDMI-Version:	2.0
Maximal mögliche Übertragungsstrecke:	100 m
unterstütze Kabeltypen:	Cat5e, Cat6, Cat6a, Cat7
HDMI-In:	1
Farbtiefe:	24 Bit
HDCP-Version:	2.2
RS-232 Eingangs-Ports:	1
HDBaseT-Port:	Ja
RJ-45-Ausgangsanschlüsse:	1