ATen VP2730 Bedienungsanleitung

ATen Schalter VP2730

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ATen VP2730 (74 Seiten) in der Kategorie Schalter. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/74

7 x 3 Seamless Presentation Switch

with Streaming, HDBaseT

VP2730 User Manual

www.aten.com

VP2730 User Manual

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE

STATEMENT: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expense.

FCC Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate this

equipment.

CE Warning: Operation of this equipment in a residential environment could

cause radio interference.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference

that may cause undesired operation.

Suggestion: Shielded twisted pair (STP) cables must be used with the unit to

ensure compliance with FCC & CE standards.

RoHS

This product is RoHS compliant.

VP2730 User Manual

iii

User Information

Online Registration

Be sure to register your product at our online support center:

Telephone Support

For telephone support, call this number:

User Notice

All information, documentation, and specifications contained in this manual are

subject to change without prior notification by the manufacturer. The

manufacturer makes no representations or warranties, either expressed or

implied, with respect to the contents hereof and specifically disclaims any

warranties as to merchantability or fitness for any particular purpose. Any of the

manufacturer's software described in this manual is sold or licensed as is.

Should the programs prove defective following their purchase, the buyer (and

not the manufacturer, its distributor, or its dealer), assumes the entire cost of all

necessary servicing, repair and any incidental or consequential damages

resulting from any defect in the software.

The manufacturer of this system is not responsible for any radio and/or TV

interference caused by unauthorized modifications to this device. It is the

responsibility of the user to correct such interference.

The manufacturer is not responsible for any damage incurred in the operation

of this system if the correct operational voltage setting was not selected prior to

operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS CORRECT

BEFORE USE.

International http://eservice.aten.com

International 886-2-8692-6959

China 86-400-810-0-810

Japan 81-3-5615-5811

Korea 82-2-467-6789

North America 1-888-999-ATEN ext 4988

1-949-428-1111

Produktspezifikationen

Marke:	ATen
Kategorie:	Schalter
Modell:	VP2730
Eingebaute Lautsprecher:	Nein
Breite:	432.4 mm
Tiefe:	262.8 mm
Gewicht:	3700 g
Mitgelieferte Kabel:	AC
Produktfarbe:	Schwarz
Höhe:	44 mm
Material:	Metall
AC Eingangsspannung:	100 - 240 V
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 80 %
Fernbedienung enthalten:	Ja
Menge pro Packung:	1 Stück(e)
Anzahl HDMI-Anschlüsse:	7
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-20 - 60 °C
Digital Audio-Ausgang (koaxial):	1
RS-232 port:	1
HDCP:	Ja
Unterstützte Video-Modi:	1080p
Rack-Einbau:	Ja
Netzteilfrequenz:	50 / 60 Hz
Benutzerhandbuch:	Ja
Anzahl VGA (D-Sub) Anschlüsse:	1
Nachhaltigkeitszertifikate:	RoHS
Anzahl der HDMI-Ausgänge:	2
Fernbedienungstyp:	IR
AC-Adapter Eingangsstrom:	1 A
Anzahl DisplayPort Anschlüsse:	1
Netzkabel enthalten:	Ja
HDMI-In:	5
HDCP-Version:	1.4
Video Porttyp:	HDMI
VGA (D-Sub)-Eingangsanschlüsse:	1
Rack-Kapazität:	1U
RJ-45-Eingangsanschlüsse:	1
Consumer Electronics Control (CEC) Unterstützung:	Ja
RJ-45-Ausgangsanschlüsse:	1
Erweiterte Display-Identifikationsdaten (EDID):	Ja