ATen CS1822 Bedienungsanleitung

ATen Schalter CS1822

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ATen CS1822 (17 Seiten) in der Kategorie Schalter. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/17

CS1822 / CS1824

2/4-Port USB3.0 4K HDMI KVMP™ Switch

RS-232 Commands

User Manual

www.aten.com

CS1822 / CS4824 RS-232 Commands

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE

STATEMENT: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

The device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate this

equipment.

Warning: Operation of this equipment in a residential environment could

cause radio interference.

KCC Statement

RoHS

This product is RoHS compliant

CS1822 / CS4824 RS-232 Commands

RS-232 Operation

Overview

The CS1822 / CS1824’s built-in bi-directional RS-232 serial interface allows

system control through a high-end controller or PC. RS-232 serial operations

in a CS1822 / CS1824 installation are managed via HyperTerminal sessions on

systems that are running Windows. In order to use this feature to send

commands to the CS1822 / CS1824, you must first download and install a

HyperTerminal application. For detailed instructions and information about

each of the commands provided in this manual, please refer to the CS1822 /

CS1824 user manual.

Setup

Install a HyperTerminal application on a computer that is not part of the

installation, which will be used to control the switch via the RS-232

connection. HyperTerminal applications can be download from the Internet,

and many operating systems are embedded with HyperTerminal applications.

Hardware Connection

Use a RJ-11 to DB-9 serial adapter (LIN5-04A2-J11G) to connect a

computer’s serial port to the serial port on the CS1822 / CS1824, as shown

below:

Note: The unit used in the diagram below is CS1824, the procedure for

connecting CS1822 is identical with fewer KVM ports.

RJ-11 to DB-9 Adapter

Produktspezifikationen

Marke:	ATen
Kategorie:	Schalter
Modell:	CS1822
Breite:	880 mm
Tiefe:	210 mm
Gewicht:	740 g
Produktfarbe:	Schwarz
Höhe:	555 mm
Energiequelle:	Gleichstrom
DC input Spannung:	5 V
Eingebautes Display:	Nein
Gleichstrom-Anschluss (DC):	Ja
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 80 %
Stromverbrauch (Standardbetrieb):	1.78 W
Gehäusematerial:	Metal, Plastic
HD-Typ:	4K Ultra HD
Anzahl HDMI-Anschlüsse:	3
Temperaturbereich bei Lagerung:	-20 - 60 °C
USB-Stecker:	USB Type-A, USB Type-B
Maximale Auflösung:	4096 x 2160 Pixel
Anzahl serielle Anschlüsse:	1
Video Porttyp:	HDMI
Schaltknopf:	Ja
Konsolenanschluss:	3.5mm headphone, 3.5mm mic, HDMI, USB A
Anzahl der Computer:	2
Tastatur Porttyp:	USB
Maus-Porttyp:	USB
Anzahl der USB-Anschlüsse an der Konsole:	2
Audio-Anschlüsse:	Ja
Videobandbreite:	60 Hz
Anzahl USB 2.0 Ports Typ B:	2
Serieller Port-Typ:	RS-232
USB 2.0 Typ-A Anzahl Hub-Anschlüsse:	2